CMC LEVR Escape System User manual

WARNING
 SERIOUS INJURY OR DEATH MAY RESULT FROM THE
IMPROPER USE OF THIS EQUIPMENT.
 THIS EQUIPMENT HAS BEEN DESIGNED AND MANUFACTURED
FOR USE BY EXPERIENCED PROFESSIONALS ONLY.
 DO NOT ATTEMPT TO USE THIS EQUIPMENT WITHOUT PRIOR
TRAINING.
 THOROUGHLY READ AND UNDERSTAND ALL LABELS AND
INSTRUCTIONS BEFORE USE.
 USE, INSPECT AND REPAIR ONLY IN ACCORDANCE WITH
MANUFACTURER’S INSTRUCTIONS.
USER INFORMATION
User Information shall be provided to the user of the product. NFPA
Standard 1983 recommends separating the User Information from the
equipment and retaining the information in a permanent record. The
standard also recommends making a copy of the User Information to
keep with the equipment and that the information should be referred to
before and after each use.
Additional information regarding life safety equipment can be found in
NFPA 1858, Standard on Selection Care, and Maintenance of Life safety
Rope and Equipment for Emergency Services, NFPA 1500, Standard on
Fire Department Occupational Safety and Health Programs, and NFPA
1983, Standard on Life Safety Rope and Equipment for Emergency
Services.
INSPECTION
Inspect the equipment according to your department's policy for
inspecting life safety equipment. Inspect the equipment prior to entry into
service, after each use, and at least once every 12 months. The
equipment should be thoroughly inspected by an inspector that meets
your department's training standard for inspection of life safety
equipment. Keep a record of the date, person performing the inspection
and results, as well as the date of first use, name of users and any other
pertinent information necessary to keep accurate track of the
equipment’s usage history in the equipment log or on a tag that attaches
to the equipment. Each user should be trained in equipment inspection
and should inspect the equipment before each use.
When inspecting the system, follow the manufacturer’s recommenda-
tions for inspection provided with each of the LEVR Escape System
components. If the system is used in actual fire ground emergency
escape, or if there is any doubt about the serviceability of the system,
remove the system from service and destroy it.
The service life of equipment depends greatly on the type of use and
the environment of use. Because these factors vary greatly, a precise
service life of the equipment cannot be provided.
CERTIFICATION
The LEVR Escape System is an NFPA 1983 certified Manufactured
Fire Escape System when used with the following components:
 CMC LEVR (300953)
 CMC Flash.2™ Escape Anchor (300983)
 CMC Fire Escape Web (20051X) with CMC factory sewn termination
CMC Rescue, Inc.
6740 Cortona Drive, Goleta CA 93117
USA
805-562-9120 / 800-235-5741
cmcpro.com
ISO 9001 Certified
©2019 CMC Control No. 500360.02.031919
IMPORTANT INFORMATION - PLEASE READ AND SAVE
LEVR™
Escape System
MEETS THE FIRE ESCAPE SYSTEM REQUIREMENTS OF NFPA 1983,
STANDARD ON LIFE SAFETY ROPE AND EQUIPMENT
FOR EMERGENCY SERVICES, 2017 EDITION.
DOT NOT DISASSEMBLE.
EMERGENCY SERVICES FIRE ESCAPE SYSTEM
IN ACCORDANCE WITH NFPA 1983 – 2017.
Made in USA
of US and foreign components
5F04

Equipment Inspection and Maintenance Log
Item ______________________ # _______________ Date in Service __________________
Brand/Model _________________________________ Strength _______________________
Date How Used or Maintained Comments Name
USING THE ESCAPE SYSTEM
For proper deployment of the LEVR Escape System, refer to the
included User Information for the LEVR, Flash.2™ Escape Anchor,
ProTech Carabiner and Fire Escape Web.
When repacking the system into the supplied CMC carry bag, stuff the
web into the main pouch to minimize twisting during deployment. Also
make sure that the Flash.2 Anchor and the LEVR are properly stowed in
their respective holders and will deploy freely.
If storing the LEVR Escape System directly in the bunker pants pocket
or using a different external bag than the supplied CMC carry bag
ensure that the web is properly stuffed and the hardware is packed such
that it will deploy freely.
To view a video with more information and detailed instructions on
properly packing the LEVR Escape System, please visit cmcpro.com
CARRYING, MAINTENANCE & STORAGE
During use, carrying and storage keep the equipment away from acids,
alkalis, exhaust emissions, rust and strong chemicals. Do not expose the
equipment to flame or high temperatures. Carry the equipment where it
will be protected as the equipment could melt or burn and fail if exposed
to flame or high temperatures.
If the equipment becomes soiled, it can be washed in cold water with a
mild detergent that is safe for use with nylon and polyester. Dry out of
direct sunlight. Do not dry in an automatic dryer. Store in a cool, dry
location. Do not store where the equipment may be exposed to moist air,
particularly where dissimilar metals are stored together.
FR ESCAPE WEB REPLACEMENT
The LEVR is pre-rigged with approved FR Escape Web prior to shipping
from CMC. If web replacement is necessary, contact CMC Customer
Support (800-235-5741) to initiate the RMA process. In addition to
replacing the web, the components of the escape system will be
inspected by the manufacturer.
REPAIR
All repair work shall be performed by the manufacturer. All other work
or modifications void the warranty and releases CMC from all liability
and responsibility as the manufacturer.
SAMPLE INSPECTION AND MAINTENANCE LOG
The sample log suggests records that should be maintained by the
purchaser or user of life safety equipment.