Dynojet Power Commander III User manual

2007 Harley-Davidson V-Rod - PCIII USB - 1i815-511 www.powercommander.com
2007 Harley-Davidson V-Rod
Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89081 [phone] www.powercommander.com
Installation Instructions
Parts List
1Power Commander
1USB Cable
1CD-ROM
1Installation Guide
1Power Adapter
2Power Commander Decals
2 Dynojet Decals
3Zip ties
2 Velcro
1Alcohol swab
You can also download the Power
Commander software and latest maps
from our web site at:
www.powercommander.com
The ignition MUST be turned
OFF before installation!
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
Button Adjustment Display
Faceplate Buttons
Expansion Port USB Port

3Unplug the stock wiring harness
from the ECM (Fig. B).
4Connect the PCIII wiring har-
ness in-line of the stock harness
and ECM (Fig. C)
2007 Harley-Davidson V-Rod - PCIII USB - 2i815-511 www.powercommander.com
1Open the main seat compart-
ment.
2Remove the rear seat by remov-
ing the two nuts (Fig. A).
Fig. AFig. B
Fig. C
Remove these nuts
Unplug
PC connectors
Stock
connector

5Install the PCIII on top of the
fuel tank (Fig. D).
The supplied velcro can be used
to secure the PCIII in place if
desired.
6Reinstall the rear seat making
sure the PCIII wiring harness
does not get damaged.
Fig. D
2007 Harley-Davidson V-Rod - PCIII USB - 3i815-511 www.powercommander.com