Enabling Devices Bubbles The Dolphin User manual

For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
-800-832-8697
[e-mail]
Bubbles The Dolphin #2339
USER’S GUIDE
50 Broadway
Hawthorne, NY 0532
Tel. [phone] / Fax [phone]
Toll Free 800.832.8697
.enablingdevices.com

Bubbles the Dolphin is a great companion for pool, beach, picnic
or party! Eight rotating bubble wands mean more bubble fun.
Just fill Bubbles’ mouth with solution, and push the on/off button
or your capability switch (not included) and out fly hundreds of
bubbles! Capability switch must be sustained to activate bubbles.
Comes with two 5ml packages of non-toxic bubble juice
concentrate, a 4 oz. empty bubble juice bottle for mixing, and a
mini screwdriver for battery installation. Size: 8"L x 6¾"W x 5¾"H.
Requires 4 AA batteries. Weight: ¾ lb.
Operation:
. Bubbles the Dolphin requires 4 AA batteries (Not included) to
operate. Use alkaline batteries only (e.g. Duracell or Energizer
brand). Do not use rechargeable batteries or any other type of
batteries because they supply lower voltage and the unit will
not perform properly. Never mix old and new batteries
together or different brands or types together.
2. The battery compartment is located on the bottom of Bubbles
the Dolphin. Carefully turn him over to reveal the battery
compartment cover. Using a Phillips head screwdriver
unscrew the cover screw and install 4 AA batteries, paying
close attention to proper (+) and (-) battery polarity.
3. Replace the battery compartment cover and secure with the
screw. Connect to any external capability switch (not included)
via the jack located on the side of the bubble blower. Bubbles
the Dolphin is equipped with a /8″ jack for use with external
capability switches with a /8″ plug. Make sure you have
your switch plugged in all the way. There should be no gaps.
4. Bubbles the Dolphin can be used with or without an external
switch. The ON/OFF switch is located on the back of his tail.
When using an external capability switch, the ON/OFF switch
needs to be set in the OFF position. Actuate your external
capability switch and the bubbles will start to flow! Once you
release your switch the bubbles will stop.
5. When finished playing with Bubbles the Dolphin turn the
bubble blower OFF to prevent battery drain.
Troubleshooting:
Problem: Bubbles the Dolphin does not function correctly.
Action #1: Check that all the batteries are installed, following
proper (+) & (-) polarity. Also check that all batteries are fresh.
Action #2: Replace the batteries paying close attention to proper
(+) and (-) battery polarity.
Action # 3: Make sure you have enough Bubble solution in the
dipping troth. The Bubble solution should cover the Bubble
Dippers completely.
Action #4: Make sure that the connection between the external
capability switch and the jack is TIGHT. There should be NO
gaps.
Action #5: Try your switch with another switch operated
toy/device in an effort to rule out your switch as the source of the
problems.
Care of Unit:
If you will not be using Bubbles the Dolphin for an extended
amount of time, we recommend removing the batteries.
Bubbles the Dolphin can be wiped clean with any household
multi-purpose cleaner and disinfectant. We recommend Simple
Green, which is a non toxic biodegradable all-purpose cleaner.
Do not submerge the unit, as it will damage the contents and the
electrical components.
Do not use abrasive cleaners, as they will scratch the surface
of the unit.
Rev 6/30/2021