Grandview Pull Up Portable Screen User manual

Grandview Pull Up
Portable Screen
User Manual
Imported and Distributed in Australia by
Herma Technologies
Factory 4A, 6 Albert St
Preston, VIC 3072
For more information please go to
www.grandviewscreens.com.au
or call 1300 730 025
Note: Warranty does not cover un-installing
or re-installing unit.
Protecting your Screen:
To ensure long lasting viewing enjoyment
keep the screen rolled up when not in use.
Check both the front and back surfaces
before retracting into the case to make
sure it is free of dust, dirt, insects or other
foreign matter. Use a soft brush or cloth to
lightly remove any foreign particles.
Cleaning your Screen:
Use warm water with a mild detergent
to remove any marks on the surface
(only dab, do not rub) or screen casing.
Immediately dry the screen with a soft
cloth or towel. Do not leave it to air dry.
Never use any solvents, chemicals or
abrasive cleaners on the screen surface
as they can permanently damage
the screen surface.
GV_Portable_PullUp_Screen_Jul11_v1.4

To the owner
Congratulations on purchasing a
Grandview Portable Screen, designed
to produce the sharpest, most pleasing
pictures with maximum convenience.
Packing the screen away
Hold the handle and slowly retract the
screen inot the casing. Snap the handle
into the base.
Fold away the feet in line with the casing.
Retraction is complete.
.
Pull the handle, releasing the lock and stop
at the desired height.
Pull the screen up and stop at the
desired position.
Assembling the screen
Lie the screen flat on the floor and swing
out the feet so that they are perpendicular
to the casing.
Release the handle
Handle
Press gently
Handle base
Front base
Handle base
Foot Casing
Front view Top view Side view