Grandview PT-L Series User manual

Model：PT-Lxx
GRANDVIEW REPRODUCING GENUINE COLORS
GRANDVIEW REPRODUCING GENUINE COLORS
Thank you for purchasing a Grandview projection screen.
Before use, please read instructions carefully. After installation, store instructions for future reference.
Instruction manual for
Portable Series Classic Tripod Screen
ISO9001:2000
International Certification
Grandview Crystal Screen Canada Ltd.
#11- 3751 North Fraser Way,
Marine Way Business Centre,
Burnaby, BC, Canada V5J 5G4
Tel: [phone] Fax: [phone]
Website: www.grandviewscreen.ca
Guangzhou Grandview Crystal Screen Co., Ltd.
P.O. 511400 Federal Ind. Zone No. 363, Yushan West Road,
Shiqiao, Panyu District, Guangzhou, Guangdong, China
Tel: [phone] Fax: [phone]
Website: www.grandviewscreen.com

16
Handle
Hook
Rivet
Top bar
Fabric
Housing
Stainless bar
Tripod connector
Tripod
Toe release plate
Extension bar
Hook
Adjustable uphold bar
Magic button
Stand bar
Plastic handle
Housing adjustment screw
Level adjustment screw
Description
Ignoring the safety warnings may
lead to injuries and/or damaging
the product.
Refrain from hanging anything on the
screen as it may cause the screen to
fall.
Roll up the screen after every use.
Leaving it hanging for a long period
of time may cause the fabric to loosen.
Please contact your local dealer for
repairs or maintenance. Please contact
our company if you have any further
questions. Avoid taking apart the
fixtures yourself. Loose parts may
cause the screen to fall.
Warnings
Do not take apart and replace with unknown parts. If there are any problems, please contact your local dealer.
Product specifications are subject to change.
1. Please make sure the Tripod stand is fully extending during using, this can assure stability and safety.
2. You can lower down the screen height according to adjusting the height of Adjusting uphold bar. But
please hold the Adjusting uphold bar first then press the Magic button(refer to step 3 of Screen
retraction for detail), while not it would lead to damage to the screen.
3. There is a nail at the middle of screen Top bar, please make sure it to be locked onto the slot nearby
the Plastic handle. Otherwise it would cause damage during carrying.
4. During retracting, please make sure the Plastic hook lock into a hole on the housing.
5. After folding the screen, make sure that the security lock is turned to Locked position. otherwise,
accident or damage of the screen would happen.

2
5
1. Grasp the screen handle with one hand and step the toe release plate to fully stretch the tripod
on the ground. (Figure1-3)
Lock
Unlock
Lock
Unlock
Lock
Unlock
2. Press the Magic button, and raise the adjustable uphold bar to release housing from the
plastic hook. (Figure 4)
3. Rotate the housing counterclockwise to horizontal level. (Figure 5)
4. Press the Magic button to low down adjustable uphold bar to the lowest point. (Figure 6)
1. Tu r n t h e Housing position lock t o “L O C K”.
( F i g u r e 1 6 )
2. After release the Plastic handle to Unlocked
condition, please hold the handle toraise the
housing until you hear a sound“DA”, which
means housing is locked, then please also
lockup the Plastic handle to Locked condition.
(Figure 17-19)
3. Hold the Adjustable uphold bar with your right
hand, then press the Magic button with your left
hand to lower down the Adjusting uphold bar to
down most point. (Figure 20)
4. Take off the Stainless bar ring from the Plastic
hook and retract the screen slowly into the
housing. After the housing is rotated to parallel
with Aluminum bar, then adjust the Adjustable
uphold bar to make the Plastic hook on its top to
lock onto a hole on the housing . At this time you
can fully retract the Metal tripod stand. (Remarks:
Please assure the Top bar is locked onto the
Aluminum stand. Figure 21)
Figure 1
Figure 2
Figure 3
Figure 4 Figure 5 Figure 6
Screen displaying
Figure 16
Figure 17
Figure 18
Figure 19
Figure 20
Figure 21
Locked
condition
Unlocked
condition
Remarks: Assure the Top bar is
locked onto the Aluminum stand.
Screen retraction

34
Lock
Unlock
Lock
Unlock
Level adjustment device
Lock
Unlock
5. Open the screen:
Method 1: Pull up and hang the bar ring onto the Plastic hook. (Figure 7-8)
Method 2: For different gradient viewing angle , we can use Keystone system . Pull out the
extension bar hidden in the uphold bar and turn it to a horizontal level. Hand the metal hook ring
over the extension bar which has four optional slots for fixing the screen. (Figure 9-10)
6. To meet different viewing height (from floor to housing), you can adjust the position of housing
via the Plastic handle. (Figure 11)
Method: Turn the Housing position lock to status of “UNLOCK”, and hold the Plastic
handle as well as lower down the housing slowly to your appreciated position after release
the Plastic handle to Unlocked condition then lockup the Plastic handle to Locked condition.
The housing can be even lower after you lower down the Adjusting uphold bar to another
lockhole below and then adjust and lockup the housing to your appreciated position.
(Figure 12-13)
7. To hold the Aluminum stand with one hand, and hold the Adjusting uphold bar with another
hand as well as raise it to adjust the height of the screen. (Figure 14) Remarks: You don't
need to press the Magic button while raise the Adjustable uphold bar.
The screen viewing area can display in 1:1, 4:3 or 16:9 format according to different height of
Adjustable uphold bar and height of housing.
Special Level Adjustment Device
If the housing is found to a little inclined when fully displayed , you can adjust it horizontally
according to the Level adjustment device. (Figure 15)
Figure 7 Figure 8
Figure 9 Figure 10
Figure 11
Figure 12
Figure 13
Locked
condition
Housing
position lock
Unlocked
condition
Figure 14
Figure 15