Guardian QSBOLT User manual

QUICK-SWITCH®BOLT BAG
Part # QSBOLT
Contents
2 Important Notes
2 Applicable Safety Standards
2 Safety Information
3 Installation
4 Specifications and Materials
4 Maintenance
Instruction Manual
Do not throw instructions away.
Read and understand instructions before
using this equipment.
1600005 Rev. A

Important Notes
Inspect prior to use
Replace if there is evidence of wear, the
QBBOLT is exposed to a shock load, or
if there is any doubt of the QSBOLT’s
integrity.
Remove tools prior to installing to prevent
injury during installation. Always be sure to
replace tools into the pockets and do not
suspend.
User shall determine suitability for use for
all intended applications.
Always close bag when items are not in
use.
Applicable Safety Standards
Meets or exceeds:
ANSI / ISEA 121-2018
Safety Information
Do not use near moving parts, mechanisms,
running machinery, or rotating equipment.
May contain electrically conductive
materials.
Do not alter product in any way from its
original state.
2

Installation
Step 1
After installing the QSBOLT bag on a
compatible belt, tighten the cord lock the
cord-lock to ensure no tools or loose items
fall out.
Step 2
Secure cord by passing free end through
d-ring at bottom edge of bag and back up to
the snap hook at the top of the bag.
Step 3
Attach Quick- Switch® tethers can to the
docks not to exceed the weight limit of each
dock.
Step 4
Attach conventional tool tethers to side
d-rings not to exceed the weight limit of each
dock.
3

Specifications
Max. Tool Weight:
Quick-Switch® Dock: 6 lb (2.7 kg)
D-Rings: 3 lb (1.4 kg)
Working Load Limit (Container): 25 lb (11.3 kg)
Max. Tether Length:
Quick-Switch® Dock: Tested as a system, no
tether length.
D-Rings: 48” (1.2 m)
4
Materials
Nylon and stainless steel.
Maintenance, Cleaning, and
Storage
Clean with a damp cloth and mild soap, wipe
o excess and thoroughly dry.
Store this product away from tools and other
objects that could cause damage.
UK
New Road, Sheerness
Kent ME12 1PZ
United Kingdom
+    
[e-mail]
CANADA
580 Notre Dame Avenue, Unit 16
Sudbury, ON
P3C 5L2
800 466 6385
[email protected]
USA
607 East Sam Houston Parkway South
Suite 800
Pasadena, TX 77503
800 466 6385
[email protected]
WARRANTY: Guardian warrants to Buyer that all products are free from defects in material, workmanship, and design (if a Supplier-responsible design), however
this warranty does not cover conditions resulting from normal wear and tear, neglect, abuse, accident or otherwise. Guardian’s obligations under this warranty
apply for the lifetime of the products and are limited to the replacement of product only. This warranty is not transferable to any other Guardian service and does
not apply to product that is resold after having been put into service. No other person, firm, entity, or the like is authorized to assume or assign for Guardian any
other liability in connection with the sale or use of Guardian’s products. Furthermore, this warranty is void if any product is changed or altered in any way, or if
the product is used in a manner other than for which it is intended. There are no implied warranties of merchantability or fitness for a particular purpose, which
are specifically disclaimed.
Guardian® and its logo are registered trademarks of Pure Safety Group Inc. dba Guardian Fall in the US and other countries.