hager JK11254D Manual

JK11254D
Invicta 3
Instruction leaflet for fitting a 4 pole direct connection kit
Locate and clip the 4 x KR125U (A) connectors onto the DIN rail (B). Fit phase and neutral links
as shown. Fit neutral and phase links to busbar at fixing points (C). Ensure these connections
are tightened to 5Nm.
Connect the incoming cables at fixing points (D), ensuring these connections are tightened to
3.5Nm
Remove the left side cutout from the main incomer shroud (E) and fit to the pan assembly with
the fixing points (F)
(A)
(C) 5Nm
(D)
3.5Nm
(B)
8mm
(E)
(F)

JK11254D
Invicta 3
Direct connection kit
Qty Description
1 Terminal shield
4KRN199 connection terminals
4Links
3M5 carp nuts
1 M6 carp nuts
Hager Ltd
Hortonwood 50
Telford
Shropshire
TF7 7FT
National Sales Hotline [phone]
National Tech Support helpline 01952 675689
Website: www.hagergroup.co.uk
Email us @: [e-mail]
ZD0684 Issue 4