Himolla 7568 User manual

INSTRUCTION MANUAL
GB

EC Declaration of Conformity
himolla Polstermöbel GmbH
Landshuter Strasse 38
D-84416 Taufkirchen / Vils
Germany
hereby declares that the product(s) named below
The table contains all products included in the scope of delivery.
The variants identified with * are subject to CE marking.
Below you will find the textile composition of your selected cover material(s):

where applicable were designed and constructed in accordance with the following European Council Directives:
EC Directives
2006/42/EC EC Machine Directive
2014/35/EC EC Low-Voltage Directive
2014/30/EC EMC Directive
Harmonized standard: EN ISO 12100 - 1 : 2010 Risk Assessment
Authorized Documentation Representative: Florian Ganslmeier
Landshuter Str. 38
D-84416 Taufkirchen/Vils
Date: Location:
01.01.2016 Taufkirchen/Vils
Legally valid signature Karl Sommermeyer
Chief Executive
himolla Polstermöbel GmbH
1

An extract from our many
certifications, test marks and
seals of approval
2
How to use your instruction manual:
To allow you to easily find and assign the points of this instruction manual
which relate to your upholstered furniture, it is important for you to know
the product group and variant of the product you have purchased. This
information can be found easily by following these points: On the second
cover page
of this instruction manual you will find the label depicted below. This will
tell you the relevant product group of the item of upholstered furniture
you have purchased, and tells you which are the relevant chapters of this
instruction manual which you should read without fail.
IMPORTANT: Read the functional description!!
The functional description fitting for your item of furniture can be
downloaded from our website using the following link(www.himolla.com/
functional description). Then look for the product group relevant for your
furniture. This is printed on the label stuck on the inside cover of this
instruction manual (see example).
Alternatively, you can mail us (funktionsbeschr[email protected])
and specify your order confirmation number. We will then send you the
relevant functional description as a pdf file. If you should not be able to do
this, you can also request a functional description as a pdf document by
phoning (0049 8084 25-0) and telling us your order number.
IMPORTANT: Please note that without stating your himolla order
confirmation number, we will not be able to process your request.
Order number: 7766554
Variant designation
Product group
e.g. Cumulus-Vario10
e.g. Cumulus-Vario10
Version with single motor and
normal footrest
Model number
himolla AB number
(= order number)
Model type
Wood type Stain colour Supplementary equipment
Congratulations on your new himolla upholstered furniture.
Enjoy the assurance of over 60 years of experience from a leading
upholstered furniture producer! The outstanding standard of material and
processing quality is certified by the three-way himolla 5-year guarantee!
Our upholstered furniture bears the quality mark of the Deutsche
Gütegemeinschaft Möbel e.V.: For you the customer, this means that
construction, materials and environmental manufacturing standards are
subject to the most stringent testing requirements.
Registration no.: DE-155-00143
& DIN EN ISO 14001
A
Sitzmöbel / seating furniture
Hersteller-Nr. / manufacturer-no.
Kollektion / collection / Modell / model
Prüfnummer / control number
A
B
C
D
für Möbel
Emission class for furniture
EMISSIONSKLASSE
Emissionsklasse für Möbel nach der
RAL-Registrierung RAL- RG 437
der Deutschen Gütegemeinschaft
Möbel •emission class for furniture
according to RAL-RG 437 •
www.emissionslabel.de
15010
Kollektion 2016/2017
1015010-02
Model
7568
Type
38
Variant
E44
Wood
43
Stain
colour
016
Supplementary
equipment
Z90
Product group
Cumulus Vario 10

1. General safety remarks
1.1 Intended purpose Page 4
1.2 Dangers inherent in using your upholstered furniture Page 4
1.3 Obligations of the user Page 5
1.4 Symbols and notices on upholstered furniture
or its packaging Page 5
2. Product description
2.1 Frame / Upholstery / Cover Page 6
2.2 Operating and display elements Page 6
2.3 Technical data from Page 7
3. Transport and setting up
3.1 Transporting your himolla upholstered furniture Page 9
3.2 Unpacking your himolla upholstered furniture Page 10
3.3 Setting up your himolla upholstered furniture Page 10
4. General remarks on use of your upholstered
furniture
4.1 Frame Page 11
4.2 Upholstery and cover from Page 12
4.3 Functions from Page 15
5. Material information
5.1 Quality of cover materials Page 17
5.2 Furnishing fabrics from Page 18
5.3 Furnishing leathers from Page 20
5.4 Wood Page 22
5.5 Granite Page 23
5.6 Glass Page 23
5.7 Metal Page 24
6. himolla guarantees
6.1 The himolla 5-year guarantee for
upholstered furniture from Page 25
6.2 The himolla 5-year guarantee for fabrics from Page 27
6.3 The himolla 5-year guarantee for leather from Page 28
7. The himolla guarantee fabrics
7.1 Index of abbreviations Page 30
7.2 Belvetara / Belvetara Melange / Belvetara Strié /
Belvetara Strié Plus Page 31
7.3 Bodyflux/Bodyflux2/Bodyflux3/Bodyflux4/Bodyflux6 Page 31
7.4 Cats / Cats2 Page 32
7.5 Lavanova Longlife Page 32
7.6 Neapel / Napoli / Palermo Page 32
7.7 Nuvano by Impalla / Nuvano Cord /
Nuvano Plus / Nuvano Royal / Nuvano Soft Page 33
7.8 Q2 uni / Q2 Struktur / Q2 Chenille Page 33
7.9 Charmelle Struktur Page 34
7.10 Samtana Page 34
7.11 Zürich Page 34
7.12 "Longlife by himolla" leather Page 35
7.13 aqua clean Page 35
7.14 Clean Odor Plus Page 35
8. Remedying faults
8.1 Upholstered furniture with manual adjustment Page 36
8.2 Upholstered furniture with electrical adjustment Page 36
8.3 Upholstered furniture with massage functions Page 36
9. Repairs
9.1 Advice in case of complaints Page 37
10. Disposal Page 37
3
Note: The himolla-specific numbers and designations are located on the
inside cover of this instruction manual. Please also note the information
on page 2 in this context.
CONTENTS

1. General safety remarks
1. General safety remarks
1.1 Intended purpose
We produce furniture for areas used for general living. Please ensure that
your upholstered furniture is only set up and used in general living areas.
Our furniture is not suitable for use outdoors or in wet conditions.
This instruction manual was drawn up by the manufacturer and forms
part of the product. The information it contains is intended for buyers or
product users. Please read through the instruction manual carefully before
using the furniture. Careful use guarantees safety for users and for the
product, extends the service life and maximizes the value of the product.
The manufacturer is not liable for damage caused as a result of failure to
observe the instruction manual or of making unauthorized modifications to
the product.
Improper use
The user alone bears responsibility for damage incurred as a result of using
the product for any other than its intended purpose and of failing to observe
the provided instruction manual; The manufacturer cannot be held liable.
Conversion or modification
Any safety-relevant modification to your upholstered furniture carried out
under the instructions of the user is not permitted.
Note: The electromagnetic behaviour of the upholstered furniture can be
compromised as a result of additions or intervention by the user.
Spare and wearing parts
The use of spare and wearing parts from third-party manufacturers can
result in hazards. Only original parts or parts authorized by the manufacturer
may be used. The manufacturer is unable to accept any liability for damage
arising from the use of spare or wearing parts not authorized by the
manufacturer.
Technical modifications
himolla works continuously to further develop its models and the technologies
used. For this reason, we reserve the right to make changes on the basis of
technological development without prior notice. As a result, changes in the
type of equipment and technical features may occur at any time. We regret
any inconvenience caused as a result.
1.2 Dangers inherent in using your upholstered
furniture
The safe use and troublefree operation of this item of upholstered furniture
can only be guaranteed with a clear understanding and observance of the
safety and user information provided in these instructions.
Important! Read through this instruction manual in detail and keep it in a
safe place should you need to refer to it later.
Note: All himolla upholstered furniture with electrical equipment complies
with the valid European Directives (see declaration of conformity on page 1).
4
Observe the instruction manual.

1. General safety remarks
5
1.3 Obligations of the user
The user is obliged to ensure that there are no third parties, limbs, animals
or other objects located in the area affected by the function (danger area)
of the upholstered furniture. The user must have also fully read through and
understood this instruction manual.
1.4 Symbols and notices on upholstered furniture or
its packaging
Observe any warning and safety notices which may have been attached
to the upholstered furniture as well as any markings relating to transport
safeguards or instructions for installation.

2.2 Operating and display elements
A detailed description of operating and display elements
can be downloaded from our website using the following link
(www.himolla.de/funktionsbeschreibung).
Controller with night-time design in the following product groups:
Cumulus-Vario10, Cumulux, Varioflex, CumulyFlex, Easy Swing 1, Senator
and Massage.
The keypad is fitted with all-over energy-saving lighting. Pressing any key
lights up the entire keypad surface for around 1 minute. For those with poor
vision, illumination helps improve recognition of the operating symbols.
Note:
A slight buzzing noise and/or heat generation in the controller are caused by
the lighting and are a normal occurrence.
Note:
Your controller contains highly sensitive electronic components. You should
therefore be particularly careful not to drop it on the floor.
Cleaning instructions:
The keypad surface can be cleaned using a slightly dampened cloth. Do not
use chemical cleaning agents.
2. Product description
1. Bearing parts
To guarantee long-lasting quality, bearing parts of himolla upholstered furniture are made of solid
wood or metal.
2. Structural styling
To allow us to guarantee, subject to correct usage, the high standard of workmanship and the
structural durability of your upholstered furniture, we use materials such as polystyrene and
duromer foam for structural styling components (such as side elements and backrests).
3. Sub-springing
himolla upholstered furniture offers top quality, durable and consistent sitting comfort. This is
assured by the use of zig-zag springs for sub-springing.
4. Seat, backrest foam
For most seat and backrest areas, superelastic moulding foam produced in-house is used. To
achieve a consistent standard of quality, continuous testing is performed in our own in-house
laboratory.
5. Cover material
Only high-quality tested fabrics or leathers are used as cover materials.
Note: For many of the function models, a metal frame construction is used instead of wood. The hardware
technology enables wide-ranging scope for different functions. All the hardware fittings used are corrosion
resistant, protected with a lacquer coat, and fulfil the durability requirements of RAL GZ 430.
6
2. Product description
2.1 Frame / Upholstery / Cover

2. Product description 7
2.3 Technical data
The power supply is provided via an external ring core transformer with an
integrated automatic overheating protection (exception: the transformer
is integrated in massage recliners) and/or fitted energy-saving switching
power supply units.
Note: The motors are not designed for continuous use. Please therefore
observe the following "rule of thumb" when using:
ON time ~ 20%
Power supply:
Systems with ring
core transformer
Systems with
switching power
supply units
Mains voltage (in volts) 110V / 230V / 240V AC 100 – 240V AC
Mains frequency (in Hertz) 50 – 60 Hz 50 – 60 Hz
Operating voltage (in volts) max. 29 V DC max. 29.4 V AC
Power consumption
in idle status (in Watts)
< 3500 mW < 500 mW
Three different battery systems are used at himolla:
Fitted lithium ion storage battery –in the following models:
Easy Swing, Cosyform individual, Mobilax etc.
Battery design Lithium-ion storage battery (li-ion)
Capacity 1.3 Ah
Output voltage 29.4 V DC
Temperature range 0°C – +40°C
Charge time appr. 3-12 hours (depending on charge status)
Note: The batteries used emit an acoustic warning when the residual
charge is too low. The signal only sounds during operation. If you hear this
warning tone, please plug the recliner immediately into the charger. While
charging, the recliner is operational and can be used.
Fitted lead acid batteries – in the following models:
Cumulus Vario10, Cumuly etc.
Battery design 2 x lead acid batteries NP7-12
Capacity 7 Ah
Output voltage 24 V DC
Temperature range 0°C – +40°C
Charge time ~ 16 hours
Note: To extend the life of the batteries, we recommend charging your
recliner once a week.
External lithium ion exchangeable batteries – in the following models:
Easy Swing 1, Cosyform 2.0 etc.
Battery design Lithium-ion storage battery (li-ion)
Capacity 2000 mAh
Output voltage 33.6 V DC
Temperature range 0°C – +60°C
Charge time ~ 7 hours
Note: The batteries used emit an acoustic warning when the residual
charge is too low. The signal only sounds during operation. If you hear this
warning tone, please plug the battery immediately into the charger. While
charging, the recliner is operational and can be used. The batteries also
feature an enquiry button which shows the charge status using 4 LEDs.
The batteries also have a sleep mode function with an ON and OFF button.
(For more information, refer to the relevant functional description at
www.himolla.de/functional description.)

2. Product description
8
SAFETY INSTRUCTIONS
• Only suitable for use in internal rooms.
• The batteries may only be charged using the supplied original himolla
charger.
• Keep the charger and where applicable the battery away from rain and
moisture. Penetration of rain into a charger increases the risk of electric
shocks.
• Check the charger, cable and plug before each use. Should you notice
any damage to the charger, the external cable or the battery pack, the
device must no longer be used.
• Do not open the charger or battery pack yourself. Only have repairs
carried out or parts exchanged by qualified specialist personnel using
original spares.
• Never operate the charger on easily flammable surfaces (e.g. paper,
textiles etc.) or in an easily combustible environment.The heat generated
during operation of the charger gives rise to a risk of fire.
• Please ensure that small children do not play with the charger or the
battery pack. Always supervise children or persons with physical, sensory
or mental disabilities which may prevent them from understanding how
to handle the battery unit correctly or appreciating the possible risks.
Note! Heart pacemaker users:
The low-volt electric motors we use are manufactured in accordance
with the valid standards and VDE regulations. This also applies to the
electronic drive system and the signalling method used. Despite this, users
of pacemakers are advised to consult their doctor or the supplier of their
pacemaker to ascertain whether the pacemaker is sensitive to interference
and which precautions should be taken to avoid interference.
Warning:
In the case of electrically operated upholstered furniture from the Cosyform
2.0, Easy Swing, Cumuly and CumulyFlex ranges, the hand-held controller
features a magnet as standard which allows the controller adhere to a metal
plate integrated for the purpose in the armrest.
Never allow this controller in the vicinity of a pacemaker or other implant.
Notice about systems with storage battery:
Please charge the recliner battery fully before first use.
Disposal:
In accordance with the EU Directive on the Disposal of Waste Electrical and
Electronic Equipment, chargers and storage batteries which are no longer
serviceable must be separately collected and sent for environmentally
responsible recycling.

3. Transport and setting up
9
3. Transport and setting up
3.1 Transporting your himolla upholstered furniture
When transporting the upholstered furniture to its final installation site,
please note the following instructions:
• Only transport your upholstered furniture in the proper original
packaging.
• Upholstered furniture should only be transported by two or more
persons (Fig. 1).
• Use the handles on the transport box for transportation (Fig. 2).
• Never lift the upholstered furniture at the side elements or headrest or
footrest section (Fig. 3).
• Do not push or pull the upholstered furniture, but lift it carefully (Fig. 4)
(Exception: Upholstered furniture on casters).
• Protect the transformer and mains supply line adequately during
transport against damage.
(Fig. 2)
(Fig. 4)
(Fig. 1)
(Fig. 3)

3. Transport and setting up
3.2 Unpacking your himolla upholstered furniture
Note:
Please observe all the enclosed assembly and transport instructions!
• Do not remove the packaging until the furniture is in its final destination.
• Do not use sharp or pointed objects to open the packaging
(retracting blade cutters are strictly off limits).
• Remove any transport safeguards which may be present before first use.
Note:
The used packaging material is recyclable. Please have it taken away by the
carrier, or ensure proper type-separated disposal of materials by your local
recycling service.
3.3 Setting up your himolla upholstered furniture
When looking for a suitable position for setting up your upholstered
furniture, ensure that it is placed so that it can fulfil its intended purpose, i.e.
• Ensure sufficient free space is available to allow all the different functions
to be performed.
• Make sure that the upholstered furniture is protected against direct
exposure to light and sunshine or against intensive exposure to heat, in
order to prevent the cover material from fading.
• Allow for sufficient air circulation.
• The upholstered furniture can only be used in a normal living room
climate - insufficient humidity can result in leather noise.
• Take care to ensure that the individual furniture components are
correctly assembled. The furniture components are assembled at the
side by means of a plug-in connection. When assembling, always lift
the part with the opening pointing downwards into the relevant mating
component.
When dismantling, proceed in the opposite sequence.
• The mains cable and electrical supply cables must not be damaged.
• The upholstered furniture must be evenly aligned and level, not half on
and half off rugs or carpets.
• Before first use, and thereafter at regular intervals, plump up and
straighten the upholstery (Fig. 1-4).
(Fig. 1) (Fig. 2)
(Fig. 3) (Fig. 4)
10

4. General remarks on use of your upholstered furniture
4. General remarks on use of your
upholstered furniture
To maintain the quality and excellent seating properties of your upholstered
furniture, the following points and notices must be carefully read and
observed in daily use without fail!
Transport and intermediate storage on the dealer's premises can leave
small traces on your sofa or armchair, for instance compressed upholstered
elements or displaced seams. Plumping up and gently pulling these
elements will quickly restore these to their desired shape and appearance.
4.1 Frame
The stability of your upholstered furniture is guaranteed by the wooden or
metal frame (see Chapter 2.1), which was designed in such a way as to
withstand the stress brought about by proper use (see Chapter 1.1).
Note:
The stability of your upholstered furniture will be retained and possible
slackening or rupture of seams will be prevented by following the tips below:
• Do not drop down into the upholstered furniture (Fig. 1). Prevent people
from jumping around on the upholstered furniture (Fig. 2).
• Do not sit on backrests, armrests, footrests or other functioning parts
(Fig. 1).
• Do not push or pull the upholstered furniture across the floor (Fig. 3);
to relocate it, ideally use two people lifting it from below, not by the
armrests.
• When setting up, transporting or relocating the upholstered furniture,
ensure that the one-sided pressure is not applied to legs or casters and
that they are placed straight, as otherwise they could bend or break off.
(Fig. 4).
• When adjusting, do not pull or push the upholstered furniture by taking
hold of moving parts (e.g. extended footrest or functional parts).
(Fig. 1)
(Fig. 3) (Fig. 4)
(Fig. 2)
11

4. General remarks on use of your upholstered furniture
4.2 Upholstery and cover
himolla upholstered furniture combines classical upholstery techniques
with modern materials. The sub-springing and sprung interior, for instance,
are made using high-quality tempered steel. Our superelastic foam, which
is used in most himolla upholstered furniture, creates seating comfort and
makes for an optimum sitting climate.
Note:
To ensure you go on enjoying your upholstered furniture for many years to
come, please observe the following points:
• Your new upholstered furniture is upholstered by us to create our
preferred casual, informal furnishing style. The cover is not closely linked
all over to the padding. This style of upholstery provides a "lived-in"
appearance, meaning that the cover does not stretch smoothly over the
upholstered furniture. A visually creased-type effect of the surface on the
seat, backrest, armrests and body of the furniture does not constitute a
quality defect, but is a deliberate effect and a typical characteristic designed
to help maximize sitting comfort. In order to minimize the unavoidable
creation of folds which occurs with use, the covers on the seat and
backrest cushions should be smoothed towards the outside, plumped up or
straightened; this prevents excessive unwanted crease formation.
• Some items of our furniture collection feature high-grade cushions with
ticking chambers for the seat, backrest and/or headrest. Here, the filling is
held within the individual ticking chambers inside the cushion to prevent it
migrating. Depending on the type and thickness of the cover material, an
impression of both the chambers and the filling may be visible. To prevent
compression of the filling material, shake or plump up the seat and backrest
cushions after use in the same way as you would a pillow. If, as is the case in
some models, the cushions are permanently fixed to the sofa body, regular
plumping up and smoothing is essential to maintain their special softness,
elasticity and suppleness.
• Depending on the length and intensity of use, the seat hardness will
change. This is a normal process as the upholstery adapts to the body.
To maintain even seat hardness levels, active sitting is recommended, i.e.
regularly rotating the use of all seat surfaces. Otherwise, uneven crease
and dip formation can result ("favourite seat" phenomenon). The larger the
surface area of individual upholstered elements or divisions, the greater
the tendency for crease / dip formation. This crease / dip formation is
exacerbated by the fact that covers stretch differently under the influence of
body heat / body fluid and the weight of the user.
• Deviations in measurement from the product seen in the furniture store
are possible depending on the model, upholstery and cover type.
Due to wide-ranging different combination possibilities, added dimensions
can also deviate somewhat.
• With certain models, the design requires gathers in the upholstery.
These can turn out differently in different model types. Gathering creates a
deliberate crease formation on the seat, backrest or side element. This can
also change with use.
• Armrests: Please never sit on the armrest, as this is only designed to
bear leaning weight. If used incorrectly, the upholstery can warp or pucker,
the filling can become displaced and if placed under extreme strain, seams
can tear. The maximum load which armrests are designed to resist is 30 kg.
12

4. General remarks on use of your upholstered furniture
• Backrest: The backrest is not suitable under any circumstances to be
used as a seat, as the backrest upholstery is not designed to withstand this
degree of vertical pressure.
• Leg rest: Please never sit on the Leg rest, as it is not designed for this
purpose. If used incorrectly, the hardware components can bend or even
break.This will result in functional failure. The maximum load capacity of the
Leg rest design is set at 20 kg.
• Spot loads: Avoid excessive spot loading, for instance never stand or
kneel on the seat surfaces.
• Seat hardness differences: The sink-in depth of individual elements of a
seating group can differ. For design reasons, it is often not possible to install
the same sub-springing for each element used. Elements with reclining
function, add-on footstools, end elements with different basic geometric
shapes. Consequently, it is not possible to avoid creating the impression
of different seat hardnesses, although the upholstery is the same or the
selected seat hardness has been used.
When assembling elements which deviate from the variants seen in the
furniture showroom, individual elements may have a slightly different
appearance in the frontal area for technical reasons (e.g. variants with
functional features/no floor clearance, variants without functional features/
floor clearance).
• During the first few weeks, all materials give off their own "new smell" /
intrinsic odour. This is not harmful and is reduced to a minimum after just a
short period of use!
• Because of the way they are manufactured, velour, microvelour and
chenille upholstery fabrics are sensitive to pressure and can take on a shot
effect as a result of wear (optical changes in degree of gloss and shade of
colour which occur depending on the incidence of light).Visible impressions
left by the body weight are known as seat shine. Seat shine and shot effects
are brought about by the effects of body weight, bodily heat and moisture.
These are fabric and material-related phenomena and consequently do not
form grounds for complaint, but are a characteristic property typical of the
material used.
• When using flat woven fabrics a certain pilling effect (formation of small
knots) is possible which is often influenced by external fibres (clothing).
• As a rule, an additional stain protection is not necessary with himolla
covers. In particular in the case of flock/microvelour, a subsequently applied
finish can permanently change the fabric. In such cases, any warranty
entitlement and all warranty claims will be null and void.
• Never use solvents or customary available microfibre cloths for cleaning
under any circumstances. Certain solvents (such as acetone or alcohol) can
attack the surface.
13

4. General remarks on use of your upholstered furniture
• In the case of light coloured cover materials, colour transfer can occur
when wearing non colourfast textiles. This is particularly common with black
or blue denim jeans. Consequently, new denim jeans which have not been
frequently washed should not be worn when sitting on light coloured covers.
Special care should be taken with damp denim and other non colourfast
textiles.
• When placing subsequent orders with the same cover to match
existing upholstered furniture, colour, structural and handle differences are
unavoidable. These differences do not form grounds for a complaint.
• For special information relating to your chosen cover, please refer to the
section on guarantee fabrics in Chapter 7 of this instruction manual.
• Any staining or damage caused by food and drink, for instance acidic
fluids (juices) or sticky sweets, body fluids, cosmetics, tobacco smoke or
medicines are excluded from coverage under the terms of the guarantee.
• If your upholstered furniture has a leather cover, additional dividing
seams may be necessary in the seat or backrest area compared to the
fabric versions (Fig. 1-4).
Fig. 1
Example: Fabric version
Rear view
Fig. 2
Example: Leather version
Rear view
Fig. 3
Example: Fabric version
Front view
Fig. 4
Example: Leather version
Front view
14

4. General remarks on use of your upholstered furniture
15
4.3 Functions
Furnishing landscapes or sofas with bed function, adjustable backrests
or armrests and Cumulous recliners, with or without electrical versions,
require fittings with adjusting mechanisms suitable for frequent movement.
To ensure that this technology works reliably on a continuous basis, careful
handling is essential.
Please note:
• When operating functional furniture, manipulate extending or hinging
parts ideally in the middle using both hands in order to prevent skewing.
This makes for easier extension and retraction and prevents fittings from
becoming warped or damaged by one-sided action.
• Never use hinging or electrically extending footrests, for example in
recliners, or adjustable hinging armrests or headrests as a seat. (Fig. 1)
• Do not reach into gaps or intermediate spaces in the upholstered
furniture or touch moving metal parts. (Fig. 2)
• Do not allow children to initiate functions without supervision or to play
with upholstered furniture. (Fig. 3)
• All functions may only be operated when you are sitting correctly in the
upholstered furniture.
• Before getting up from your upholstered furniture, return all functions to
their home position (exception: Rise function).
• Many of our items of functional furniture have manually adjustable
headrests. A slight pressure to the front or back will adjust the angle of
incline. After use, please return the headrest to the extended position to
ensure that no compression can form in the foam and that no impressions
are left in the cover.
• Always pull out the mains plug before wet cleaning your upholstered
furniture or the floor below (footprint). Please note the instructions on care
and maintenance in Chapter 5 of this instruction manual.
• Remember that functioning parts require a certain amount of clear
space. Depending on the cover type and thickness, gaps may be created
for technical reasons.
• In particular in the case of functional furniture, after execution of relevant
movement, the upholstery cover will require smoothing or straightening to
ensure that seams match.
• As a result of the function, creases and folds cannot be avoided in use,
for instance creases caused by moving headrests.
• Please note that the reclining function of our transformable sofas is not
intended as a permanent bed replacement.
• With all functions (e.g. TV recliners, sofa beds, functional suites and
furnishing landscapes), the use of rotating and riveted joints or torsion
springs can give rise to functionally related noises. Running noises
are material related and cannot be avoided in any kind of drive system
(e.g. electric motors).

4. General remarks on use of your upholstered furniture
• When using a functional feature of your upholstered furniture, abraded
metal particles can accumulate under the furniture. It is currently not
technically possible to produce fully abrasion-free fittings. Fittings with
rotary riveted joints produce abraded particles for unavoidable functional
reasons.
Recommendation:
Please regularly remove abraded particles, depending on the floor covering
either by vacuuming or wiping, or alternatively place an easy-clean
underlay underneath armchairs or elements which are open to the floor. As
a functional item of furniture is exposed to regular movement sequences,
the joints of the fittings should be occasionally checked and cleaned. Do
this by wiping over the rivet points with an old duster or a moistened cloth.
However, before doing so ensure that the electrical drive of the armchair has
been disconnected from the mains and that there is nobody sitting in the
chair who could initiate the function.
(Fig. 2)
(Fig. 1)
(Fig. 3)
16

5. Material information
17
5. Material information
5.1 Quality of cover materials
You have chosen a very high-quality cover material. himolla implements
a policy of adherence to the quality guidelines of the Deutsche
Gütegemeinschaft Möbel e.V. Backed by this seal of quality, the material
characteristics of your upholstery cover are guaranteed to give you lasting
pleasure over many years.
Regular cleaning and care of the cover is essential to maintaining the
optimum condition of your upholstered furniture, as the cover material
is generally the component of your upholstered furniture exposed to the
greatest wear and tear. Sunlight, mechanical stress and other environmental
factors make stringent demands on the quality of the cover materials.
himolla cover materials are produced by the respective suppliers in
compliance with stringent quality standards and tested in accordance with
the guidelines of the Deutsche Gütegemeinschaft Möbel e.V. Before the
cover materials can be included in the himolla collection, they are subjected
to strict quality controls in the himolla test lab.
himolla upholstery fabrics are characterized by their optimum care and
serviceability characteristics as well a high degree of durability. State-
of-the-art computer-controlled cutting systems guarantee an extremely
accurate fit of your furniture upholstery cover.
himolla leather qualities are approved by himolla representatives before
they are dispatched by the supplier in order to guarantee the quality of the
individual leather hides used. This careful selection of materials and the
hand crafted cutting of leather hides ensures the production of a top-quality
leather cover whose characteristic natural and structural features make it
unique.

5. Material information
5.2 Furnishing fabrics
We offer a wide selection of different upholstery fabrics. All furnishing fabrics
are manufactured using state-of-the-art techniques and technologies.
Depending on which furnishing fabric you have chosen, you will be dealing
with wide-ranging different material characteristics. You should have been
informed during the sales and advisory meeting in your furniture store about
which aspects you need to look out for. If you have chosen in favour of a
guarantee fabric, you will find the relevant material characteristics explained
again under the heading "Guarantee covers".
Cleaning and care of fabrics
Regular maintenance will prolong the life of your upholstered furniture.
Depending on the intensity of use, regular brushing using a soft natural
bristled brush or vacuuming with the upholstery nozzle of your vacuum
cleaner are recommended.
In case of liquid spillages on the upholstery, it is important to lose no time in
mopping up any surplus fluid with an absorbent cloth. Never rub the area,
as this will only force the dirt deeper into the fabric. The stain can then
be removed using boiled lukewarm water, neutral soap and a clean soft
sponge. Only ever use lukewarm water. Please never use microfibre cloths
or microfibre sponges.
When using chemical cleaning agents such as acetone, alcohol, acid or
cleaning benzene, there is a risk of affecting the fabric colour.
Note:
Microfibres/microvelour must not come into contact with any solvents or
acids, as these can destroy the fabric. When removing sticky deposits
(e.g. left by confectionery), first soften the affected area by dampening
and carefully remove the sticky material. Attempting to detach this type of
material when dry can cause fibres to become detached.
Always clean the entire surface area: In particular in the case of upholstered
furniture which has been used over long periods, upholstery covers tend to
grow darker over time. If you now clean intensively in just one spot, this may
remain visible as a lighter area. For this reason, it is advisable to clean the
whole of the affected area (seat, back and armrests) from seam to seam, or
over the whole area starting from the outside and working inwards.
Leave to dry thoroughly: After cleaning with water and natural soap, it is
important to leave the suite plenty of time to dry out completely. Normal
room temperature is ideal for this. If the suite is used when still damp, it can
easily develop seat shine! Take care when drying with hot air (hair dryer, hot
air fan): Synthetic materials are sensitive to heat.
Note:
Light-coloured fabric covers can become discoloured by dye rubbing off
non-colourfast textiles such as dark jeans fabric. If dye rubs off denim jeans
onto the upholstery fabric even after several washes, this is evidently due
to a fault in the clothing fabric and is in no way due to the quality of the
upholstery cover.
18