HYOSUNG MONiMAX8300D User manual

Installation Manual
MONiMAX8300D / 8300T System (BRM ver.)
V01.00.00 (2019.12.04)
© Hyosung TNS Inc. All Rights Reserved.

© Hyosung TNS Inc. All Rights Reserved. I
Revision History
Installation Manual –MX8300D / 8300T System (BRM ver.)
No.
Version
Date
Description of Change
Chapter
1
V01.00.00
2019/12/04
New Publication
All
© Hyosung TNS All Rights Reserved.
The content of this specification is protected by copyright laws.
2019. 12. 04. 1st Release

II © Hyosung TNS, Inc. All Rights Reserved.
Contents
Chapter1. Preface...........................................................................................................................1-1
Purpose.........................................................................................................................................................1-1
Audience .......................................................................................................................................................1-1
Support Information.......................................................................................................................................1-1
What is in This Manual...................................................................................................................................1-1
Terminologies................................................................................................................................................1-2
Abbreviations ................................................................................................................................................1-2
Safety Precautions (English).........................................................................................................................1-4
Précautions pour la sécurité (French)...........................................................................................................1-6
Related Document.........................................................................................................................................1-8
Chapter2. Introduction...................................................................................................................2-1
About the MX8300D / 8300T ........................................................................................................................2-1
Chapter3. Installation Information ................................................................................................3-1
Installation Condition and Space ..................................................................................................................3-1
Exterior..........................................................................................................................................................3-2
Access for Device .......................................................................................................................................3-10
Service Area................................................................................................................................................3-15
Chapter4. System Installation.......................................................................................................4-1
Unpacking the ATM.......................................................................................................................................4-1
Installation Frame..........................................................................................................................................4-2
Power Requirements ....................................................................................................................................4-6
Notes.......................................................................................................................................Notes-1

Installation Manual Chapter1.Preface
© Hyosung TNS Inc. All Rights Reserved. 1-1
Chapter1. Preface
Purpose
►This manual is produced to provide the guidelines for installers to comply with while installing it.
►This manual describes how to prepare for and to proceed the installation of MX8300D / 8300T
in advance.
Audience
►This manual is for persons related to installing MX8300D / 8300T in branches of banks, such as
designers and construction workers of the branches and ATM installers, to work efficiently and
conveniently.
Support Information
►If any question or installation error occurs while preparing for and installing MX8300D / 8300T
in compliance with this manual, please contact maintenance staffs of Hyosung TNS.
For the contact of maintenance staffs of Hyosung TNS, see the E-mail addresses and
telephone numbers provided separately.
What is in This Manual
►MONiMAX referred to as “MX”
►This manual is designed to provide the installation guide for the MX8300D / 8300T and the
detailed description of the following:
▪ Important Warnings
▪ Information for installation
►All measurements in this manual are in metric and [ ] is inch scale.
►All information described in this manual is a licensed product of Hyosung TNS.
Some of the information in this manual may differ according to the network processor to be
connected and may be subsequently updated by the bank’s needs or the improvement by
Hyosung TNS.
It is the policy of Hyosung TNS to improve products as new technology, components, software,
and firmware become available. Therefore Hyosung TNS reserves the right to change
specifications without notice.

Chapter1.Preface Installation Manual
1-2 © Hyosung TNS, Inc. All Rights Reserved.
Terminologies
►In this document the terminology listed below is used as follows:
▪Customer and consumer refer to any person who transacts business through the ATM.
▪Device and unit refer to the standard and optional ATM equipment, such as monitor, card
reader, printer and dispenser.
▪Fascia refers to the entire front portion of the unit, including the portion where the customer
transacts business.
▪Module refers to a plug-in device that can be serviced or replaced.
▪Note(s) and bill(s) refer to the individual documents loaded into and dispensed from the
dispenser.
▪Servicing and maintenance refer to the supervisor, operator and technician’s tasks performed
to keep the ATM operational.
▪Screen refers to the text appearing on the customer display.
Abbreviations
►In this document the abbreviations listed below is used as follows:
#
Abbreviations
Description
1
AD board
Analog to Digital conversion board
2
ADA
The American Disabilities Act
3
AP
Application Program
4
Assy
Assembly
5
BRM
Bill Recycle Module
5-1
BC
Bill Checker
5-2
BMD
Body Module-Down (Lower Body of the Module)
5-3
BMU
Body Module-Up (Upper Body of the Module)
5-4
CSM
Customer Service Module
5-5
DPC
Deposit Cassette
5-6
RC
Recycle Cassette
5-7
RJC
Reject Cassette
5-8
TE
Tape Escrow
5-9
UTC
Utility Cassette
6
BATT S/W
Battery Switch
7
CAM
Camera Unit
8
CE
Control Electronics
9
CCIM
Cash & Check In Module
10
CCR
Contactless Card Reader
11
CDU
Cash Dispenser Unit
12
Earphone Jack
Voice Converter for Visually Disabled Persons (ADA)

Installation Manual Chapter1.Preface
© Hyosung TNS Inc. All Rights Reserved. 1-3
#
Abbreviations
Description
13
EMV
Europay, Mastercard, Visa
14
EP
Elementary Program
15
EPP
Encryption PIN Pad
16
H/W
Hardware
17
I/F
Interface
18
ISO
International Standard Organization
19
JPR
Journal Printer
20
LCD
Liquid Crystal Display
21
MCU
Magnetic Card Unit
22
OPL
Operation Panel for Customers to Operate
23
OSD board
On Screen Display Board
24
P/S
Power Supply
25
PIN
Personal Identification Number
26
PNC
Panel Control Board
27
PTR
Printer (mainly Receipt Printer)
28
S/W
Switch
29
SIU
Sensor and Indications Unit
30
SP
Service Provider
31
SPR
Slip Printer (Receipt Printer)
32
TTU
Text Terminal Unit (OPL or SPL)
33
VFD
Vacuum Fluorescent Display

Chapter1.Preface Installation Manual
1-4 © Hyosung TNS, Inc. All Rights Reserved.
Safety Precautions (English)
▶Common Safety Precaution
Precautions outlined this manual provide information on safe
and proper handling of the product. Non-compliance of the
precautions may result in injury or damage to the product.
This precaution symbol with sample term tells you safety
warnings during equipment handlings.
▶Please read the following instructions before operating equipment.
▪Operate equipment in the order outlined in this manual.
▪Follow precautions indicated in this manual, as well as the equipment itself.
Failure to properly address these precautions may lead to injury or damage to the product.
▪Avoid operations not addressed in this manual.
▪If you cannot remedy system problems using the methods outlined in this manual, please
refer to contact information listed in the manual.
▪Any change or modifications in construction of this device which are not expressly approved
by the party responsible for compliance could void the user’s authority to operate the
equipment.
<Note!>
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
▶Description of Precaution Symbols
Symbol
Description
Electrical Shock Warning
▪Do not remove cover. Only a maintenance engineer is
allowed to open the cover.
▪Do not touch. You may receive electric shock.
▪Make sure to turn off the power when servicing the
equipment.
High Temperature Warning
▪Do not touch the equipment when it is running.
▪The equipment can get extremely hot and may cause a
burn.
▪Make sure to close the cover before running the
equipment.

Installation Manual Chapter1.Preface
© Hyosung TNS Inc. All Rights Reserved. 1-5
Use Precaution when Moving
▪The equipment is heavy. Make sure at least 2 people lift or
move the equipment.
▪Do not attempt to move the equipment alone. You may be
injured from dropping the heavy equipment.
Fire Hazard
▪Place the equipment in an area away from any
combustible materials.
▪The equipment may catch on fire from overheating or short
circuit of the power supply unit.
Disassembly Warnings
▪Do not disassemble or modify the equipment unless you
are a certified engineer.
▪Contact the service center for maintenance, adjustments
and repairs.
▪Improper disassembly may cause fire or electrical shock.
Collapse Precautions
▪Do not place the equipment where the floor cannot sustain
the weight of the equipment, or on slanted or unstable
surface.
▪Equipment may fall and cause injury or damage.
Unplug the Equipment
▪Stop using the equipment immediately if it smokes, emits
an unusual smell, makes abnormal sounds, or if liquids or
other foreign materials enter the equipment.
▪If the above-mentioned abnormalities occur, immediately
turn off the power, unplug the equipment and contact the
service center.
▪If you ignore these symptoms, the equipment may catch on
fire or cause electric shock.
<CAUTION>
1. TO REDUCE THE RISK OF FIRE, USE ONLY No. 26 AWG OR LARGER
TELECOMMUNICATION LINE CORD.
2. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSED OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
3. FOR PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED
NEAR THE EQUIPMENT AN SHALL BE EASILY ACCESSIBLE
4. THE EQUIPMENT IS TO BE SECURED TO THE BUILDING STRUCTURE BEFORE
OPERATION.

Chapter1.Preface Installation Manual
1-6 © Hyosung TNS, Inc. All Rights Reserved.
Précautions pour la sécurité (French)
►Précaution générale pour la sécurité
Précautions décrits de ce manuel fournissent des informations sur
une manipulation sûre et appropriée du produit. Le non-respect
des précautions peut causer des blessures ou endommager le
produit.
Ce symbole de précaution avec le terme d’example vous indique
des consignes de sécurité lors de la manipulation de l'équipement.
►Veuillez lire des instructions suivantes avant d'utiliser l'équipement
▪Fonctionner l'équipement dans l'ordre indiqué dans ce manuel.
▪Suivre les précautions indiquées dans ce manuel, ainsi que l'équipement lui-même.
Le défaut de traiter correctement de ces précautions peut entraîner des blessures ou
endommager le produit.
▪Évitez des opérations non traitées dans ce manuel.
▪Si vous ne pouvez pas résoudre des problèmes du système en utilisant des méthodes
décrites dans ce manuel, veuillez se référer aux informations de contact figurant dans le
manuel, s’il vous plaît.
▪Certain changement ou des modifications dans la construction de ce dispositif qui ne sont pas
expressément approuvés par la partie responsable de la conformité pourraient annuler
l'autorité de l'utilisateur de faire fonctionner l'équipement.
<REMAQUE!>
Cet équipement a été testé et fondé pour se conformer aux limites pour un équipement
numérique de classe A, conformément à la partie 15 des règles FCC. Ces limites sont
conçues pour fournir une protection raisonnable contre des interférences nuisibles
lorsque l'équipement est utilisé dans un environnement commercial. Cet équipement
génère, utilise et peut émettre des fréquences radios et, s'il n'est pas installé et utilisé
conformément aux instructions de ce manuel, peut causer des interférences nuisibles
aux communications radios.
Le fonctionnement de cet équipement dans une zone résidentielle est susceptible de
provoquer des interférences nuisibles dans le cas, l'utilisateur devra corriger ces interférences
à ses propres frais.
►Description des symboles de précaution
Symbole
Description
Choc électrique
• Ne pas retirer le couvercle. Seul le technicien d'entretien est
autorisé à ouvrir le couvercle.
• Ne pas toucher. Vous pouvez avoir un choc électrique.
• Assurez-vous d'éteindre l'appareil lors de l'entretien de
l'équipement.

Installation Manual Chapter1.Preface
© Hyosung TNS Inc. All Rights Reserved. 1-7
À haute temperature
• Ne pas toucher l’équipement quand il est en marche.
• L’équipement peut devenir extrêmement chaud et peut provoquer
une brûlure.
• Assurez-vous de fermer le couvercle avant de lancer l'équipement.
Soyez prudent lors du déplacement
• L'équipement est lourd. Assurez-vous d'au moins 2 personnes pour
soulever ou déplacer l'équipement
• N'essayez pas de déplacer l’équipement seul. Vous pouvez être
blessés par la chute de l'équipement lourd.
Risque d'incendie
• Placer l’équipement dans une zone éloignée de tous les matériaux
combustibles.
• L'équipement peut s'enflammer de surchauffe ou de court-circuit de
l'unité d'alimentation.
Démontage
• Ne pas démonter ou de modifier l'équipement, sauf si vous êtes
ingénieur certifié.
• Contacter le centre de service pour l'entretien, le réglage et
la réparation.
• Le mauvais démontage peut provoquer un incendie ou un
choc électrique.
Tomber
• Ne pas placer l'équipement dont le sol ne peut pas supporter le
poids de l'équipement, ou sur une surface inclinée ou instable.
• L'équipement peut tomber et provoquer des blessures ou
des dommages.
Débrancher l'équipement
• Cessez d'utiliser l’équipement immédiatement si il fume, émet une
odeur inhabituelle, fait des bruits anormaux ou si des liquides ou
d'autres matériaux étrangers dans l'équipement.
• Si les anomalies mentionnées ci-dessus se produisent, éteignez
immédiatement la puissance, débranchez l'appareil et contactez le
centre de service.
• Si vous ignorez ces symptômes, l’équipement peut prendre feu ou
provoquer un choc électrique.
AVERTISSEMENT :
1. POUR RÉDUIRE LES RISQUES D'INCENDIE, UTILISEZ UNIQUEMENT AWG n °26 OU
LA LIGNES DE TELECOMMUNICATION PLUS GROSSE.
2. RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACEE PAR UN TYPE
INCORRECT. DISPOSER POUR UTILISATION DES BATTRIES SELON LES
INSTRUCTIONS.
3. POUR LES APPAREILS RACCORDES, LA PRISE DOIT ETRE INSTALLEE PRES
D’EQUIPEMENT POUR ÊTRE FACILEMENT ACCESSIBLE.
4. L’EQUIPEMENT DOIT ETRE SECURISE A LA STRUCTURE DU BATIMENT AVANT
D'UTILISER.

Chapter1.Preface Installation Manual
1-8 © Hyosung TNS, Inc. All Rights Reserved.
Related Document
►The related documents are listed as follows. If needed, please contact staffs of our technical
support team and maintenance team.
▪Operator Manual
▪Service Manual
▪OP Function Manual
▪Error Code Manual
▪VDM Manual

Installation Manual Chapter2. Introduction
© Hyosung TNS Inc. All Rights Reserved. 2-1
Chapter2. Introduction
About the MX8300D / 8300T
►The MX8300D / 8300T is a full service ATM. Cardholders and/or customers deposit and
withdraw the cash and receive the transaction records with MX8300D / 8300T ATM.
The MX8300D / 8300T is a versatile, easily maintained delivery system that can be modified to
keep pace with the bank's changing needs.
►The benefits that the new concept MX8300D / 8300T provides are as follows.
Removes inconvenience which occurs when bank clerks directly handle cash with customers
and relieves workload upon tellers by processing withdrawal of cash automatically.
Allows tellers to calculate and close amount faster than the existing manual calculation.
Allows easy and quick installation and maintenance.
<Note!>
The figures/photos/diagrams in this manual are for well understanding therefore they may be
different from real machines.

Installation Manual Chapter3.Installation Information
© Hyosung TNS, Inc. All Rights Reserved. 3-1
Chapter3. Installation Information
Installation Condition and Space
►When you determine the location of your ATM, ensure that the physical environment,
including the temperature and humidity, meets the requirements. Following conditions should
be met before installing equipment.
1. Avoid locations where intense direct sunlight is reflected off the LCD screen.
2. Avoid locations where strong static electricity can occur.
3. The ATM should be mounted on concrete or other nonflammable surface only.
4. The floor must allow easy wheelchair access from the front or the side.
5. Space required for servicing the machine should be considered before installation.

Chapter3. Installation Information Installation Manual
3-2 © Hyosung TNS, Inc. All Rights Reserved.
Exterior
►Front Elevation
- MX8300D
- MX8300T

Installation Manual Chapter3.Installation Information
© Hyosung TNS, Inc. All Rights Reserved. 3-3
►Side Elevation
- MX8300D
1) Wall 10” type
2) Wall 13” type

Chapter3. Installation Information Installation Manual
3-4 © Hyosung TNS, Inc. All Rights Reserved.
3) Wall 15” type
- MX8300T
1) Wall 10” type

Installation Manual Chapter3.Installation Information
© Hyosung TNS, Inc. All Rights Reserved. 3-5
2) Wall 13” type
3) Wall 15” type

Chapter3. Installation Information Installation Manual
3-6 © Hyosung TNS, Inc. All Rights Reserved.
►Plan View
- MX8300D
1) Wall 10” type
Weight: 1,851.883lbs (840Kg)
2) Wall 13” type

Installation Manual Chapter3.Installation Information
© Hyosung TNS, Inc. All Rights Reserved. 3-7
3) Wall 15” type
- MX8300T
1) Wall 10” type
Weight: 1,851.883lbs (840Kg)

Chapter3. Installation Information Installation Manual
3-8 © Hyosung TNS, Inc. All Rights Reserved.
2) Wall 13” type
3) Wall 15” type