IHP FP6820-4S-DVFP User manual

1
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE
FACE SURROUND KIT MODELS:
FP6820-4S-DVFP
FP5616-4S-DVFP
INSTALLATION INSTRUCTIONS FOR DECORATIVE FACE SURROUND KIT.
P/N 900863-00
REV. NC, 09/2017
HEARTH PRODUCTS
KITS AND ACCESSORIES
SURROUND KIT
Cat. No. Model Description Kit Contents
F3451
F3452
FP6820-4S-DVFP
FP5616-4S-DVFP
4 Sided Surround (68” x 20”)
4 Sided Surround (56” x 16”)
Panel Assembly,
Top/Bottom (2 ea.)
Panel Assembly,
Sides (2 ea.)
MATERIALS NEEDED
Adhesive Liquid Nails (Not supplied)
GENERAL INFORMATION
Read this instruction sheet in its entirety before beginning the
installation.
If you encounter any problems, need clarification of these instruc-
tions or are not qualified to properly install this kit, contact you
local distributor or dealer.
Parts may scratch and bend. Great care should be used in handling
them.
ALL WARNINGS AND PRECAUTIONS IN THE INSTALLATION AND
OPERATION MANUAL PROVIDED WITH THE FIREPLACE APPLY TO
THESE INSTRUCTIONS.
TURN OFF THE FIREPLACE AND ALLOW IT TO COMPLETELY COOL
BEFORE PROCEEDING.
FP5616-4S-DVFP FOR USE WITH:
SUPERIOR - DRL6542 AND DRL3042 FIREPLACE SERIES
ASTRIA - RHAPSODY42 AND SIRIUS42 FIREPLACE SERIES
FP6820-4S-DVFP FOR USE WITH:
SUPERIOR - DRL6554 AND DRL3054 FIREPLACE SERIES
ASTRIA - RHAPSODY54 AND SIRIUS54 FIREPLACE SERIES
fire-parts.com

2
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE
Printed in U.S.A. © 2017 Innovative Hearth Products
P/N 900863-00 REV. NC 09/2017 1508 Elm Hill Pike, suite 108 • Nashville, TN 37210
IHP reserves the right to make changes at any time, without notice, in design, materials,
specifications, and prices, and also to discontinue colors, styles, and products.
Consult your local distributor for fireplace code information.
Figure 1 - Applying Glue to Back of Surround Face
(Back View Shown)
INSTALLATION INSTRUCTIONS
1. Peel off protective film partially (from the back of the face up to the
front face edge) from each surround piece.
2. Apply approximately, 1/4" continuous bead of glue around and in zigzag
pattern to the back of surround pieces (see Figure 1).
Note: Continuous bead of glue across bottom is vital.
3. Install bottom surround piece centered with the fireplace onto the wall
and flush with bottom edge of screen barrier (see Figure 2).
4. Install side panels, flush with edges of bottom surround piece and
edge of screen barrier (see Figure 2).
Surround Face Edge 1/4” Bead of Glue
Figure 2 - Surround Face Installation
Surround
Top Face
Surround
Side Face
Surround
Bottom
Face
5. Install top surround (after steps 3 and 4 are complete) flush with face
sides and edge of screen barrier (see Figure 2).
6. Allow the glue to cure at least 24 hours prior to operation of fireplace.
7. Peel off remaining protective film from face surround pieces in its
entirety.
8. Installation is now complete.
Wall
Screen
Barrier
fire-parts.com