KI USPF2324 User manual

Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Assembly Instructions
Universal Screens
Fixed-Height & Height-Adjustable
October 2020
Important: This instruction
consists of two separate instructions,
one explaining how to assemble
Universal Height-Adjustable Screens
and the other explaining how to
assemble Universal Fixed-Height
Screens. If Universal Height-
Adjustable Screens are to be
installed, reference the instructions
on pages 1 through 3. If Universal
Fixed-Height Screens are to be
installed, skip pages 1 through 3 and
proceed to the instructions on page 4.
Universal Height-Adjustable
Screens Installation
Note: If tables do not have
pre-drilled holes under the tabletops
for installing screens, retrofitting will
be required. See page 6, “Retrofit
Drilling Guidelines.”
1. Carefully remove contents from
shipping cartons and identify parts
and hardware supplied.
Note: The Universal Height-
Adjustable Screen may be installed
on Pirouette, WorkUp, and Toggle
Table models. Certain table models
allow screens to be mounted on the
side of the table as a divider screen.
The assembly process is the same
for divider screens and privacy
screens. The following instructions
show the installation of a privacy
screen to a 24 x 48” Pirouette
Fixed-Base Rectangular Table, your
configuration may vary.
Important: Five different adjustable
mechanisms are designed to install
for different screen widths/weights.
Each of the five mechanisms is
weight-balanced differently and is
color coded with a different blue,
green, pink, purple or yellow round
sticker applied under the mounting
bracket. It is important to reference
the Screen Model/Mechanism
Charts on this page and use the
correct mechanisms per the screen
model being installed. If screens are
installed with the incorrect adjustable
mechanisms, screens will not be
counter balanced properly and
disassembly and correct reassembly
will be required (Detail A).
2. Locate an adjustable mechanism
per the screen model being installed
and position the mounting bracket
to align with the pre-drilled holes on
the underside of the tabletop. Secure
mechanism to the underside of the
tabletop using four #12 x 1” screws
(Figure 1).
Figure 1
Pirouette table
fixed-base
#12 x 1”
PPH screws
adjustable
mechanism
mounting
bracket
vertical
railway
Screen
Models
(USPF &
USPFF)
Mechanism
1
Mechanism
2
Mechanism
3
USPF2324 Yellow Yellow N/A
USPF2924 Yellow Yellow N/A
USPF3524 Yellow Green N/A
USPF4624 Green Green N/A
USPF5224 Green Yellow Green
USPF5824 Green Yellow Green
USPF6424 Green Green Green
USPF7024 Green Green Green
USPF8224 Green Pink Yellow
USPF2331 Yellow Yellow N/A
USPF2931 Yellow Green N/A
USPF3531 Green Green N/A
USPF4631 Yellow Pink N/A
USPF5231 Green Green Green
USPF5831 Yellow Pink Yellow
USPF6431 Green Pink Yellow
USPF7031 Green Green Pink
USPF8231 Pink Green Pink
Screen
Models
(USFA &
USFAF)
Mechanism
1
Mechanism
2
Mechanism
3
USFA2324 Green Green N/A
USFA2924 Pink Green N/A
USFA3524 Blue Yellow N/A
USFA4624 Blue Pink N/A
USFA5224 Pink Pink Pink
USFA5824 Green Purple Green
USFA6424 Blue Yellow Blue
USFA7024 Blue Green Blue
USFA8224 Blue Blue Blue
USFA2331 Pink Green N/A
USFA2931 Pink Pink N/A
USFA3531 Blue Pink N/A
USFA4631 Blue Blue N/A
USFA5231 Blue Green Blue
USFA5831 Blue Pink Blue
USFA6431 Blue Blue Blue
USFA7031 Purple Green Purple
USFA8231 Purple Blue Purple
blue, green,
pink, purple or
yellow sticker
Detail A
Polyester Felt Screen Model/Mechanism Chart Upholstered Screen Model/Mechanism Chart

2
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Universal Height-Adjustable Screens
Assembly Instructions
Universal Height-Adjustable
Screens Installation (cont.)
3. Insert a square holed sleeve onto
the adjustable mechanism rod, then
place the longer connecting rod
onto the square holed sleeve just
installed (Detail B). Finally, insert a
second square holed sleeve onto the
opposite end of the connecting rod
(Figure 2).
4. Locate another adjustable
mechanism and press the mounting
bracket up to the underside of the
worksurface, then slide it over and
insert the adjustable mechanism rod
into the square holed sleeve/long
connecting rod installed in step 3,
synchronizing the two mechanisms
together. Secure the mounting
bracket of the second mechanism to
the underside of the tabletop using
four #12 x 1” screws (Figure 3).
5. Screens installed to tables 60”
or greater have three adjustable
mechanisms per assembly. If
assembly contains a third
mechanism repeat steps 3 through 4.
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Figure 3
adjustable
mechanism
mounting
bracket
square
holed sleeve
#12 x 1”
PPH screws
Detail
C
adjustable
mechanism
rod
square holed
sleeve
Figure 2
adjustable
mechanism
connecting
rod
square
holed sleeve
square
holed sleeve
connecting
rod
square
holed
sleeve
adjustable
mechanism
rod
Detail B
square
holed sleeve

3
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Universal Height-Adjustable Screens
Assembly Instructions
6. Once all adjustable mechanisms are
installed, position the screen onto
the backs of the vertical rails and
align mounting holes. Secure screen
to the rails using two knurled thumb
screws per mechanism (Figure 4).
Figure
4
adjustable
mechanism
vertical
railway
knurled thumb
screw
screen

4
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Universal Fixed-Height Screens
Assembly Instructions
Universal Fixed-Height Screens
Installation
Note: If tables do not have
pre-drilled holes under the tabletops
for installing screens, retrofitting will
be required. See page 6, “Retrofit
Drilling Guidelines.”
1. Carefully remove contents from
shipping cartons and identify parts
and hardware supplied.
Note: The Universal Fixed-Height
Screen may be installed on Pirouette,
WorkUp, and Toggle table models.
Certain table models allow screens
to be mounted on the side of the
table as a divider screen. The
assembly process is the same for
divider screens and privacy screens.
The following instructions show
the installation of a privacy screen
to a 24 x 48” Pirouette Fixed-Base
Rectangular Table, your configuration
may vary.
Important: Two different
fixed-height brackets are designed to
install for different screen heights as
illustrated in Detail A. Brackets with
inserts closer together are used for
installing screens 24 and 29” high,
while brackets with inserts that are
farther apart are used for installing
screens 31” high. Correct brackets
must be used for the inserts in the
brackets to align with the mounting
holes in the screens (Detail A).
2. Locate a fixed-height bracket per
the screen model being installed
and position the mounting tabs
to align with the pre-drilled holes
on the underside of the tabletop.
Secure the bracket to the underside
of the tabletop using four #12 x 1”
screws. Screens installed to tables
60” or greater have three fixed-height
brackets per assembly. Repeat this
process to secure the remaining
brackets to the underside of the table
(Figure 1).
Pirouette table
fixed-base
fixed-height
bracket
fixed-height
bracket
#12 x 1”
PPH screws
#12 x 1”
PPH screws
Figure 1
Detail A
fixed-height
bracket - 31”
fixed-height
bracket - 24”&29”
inserts
inserts

5
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Universal Fixed-Height Screens
Assembly Instructions
3. Once all fixed-height brackets are
installed, align the mounting holes
of the screen to the corresponding
inserts on the back of the brackets.
Press the screen against the backs
of the rails. Secure the screen to the
rails using two knurled thumb screws
per bracket (Figure 2).
screen
knurled thumb
screw
Pirouette table
fixed-base
Figure
2
fixed-height
bracket

6
Universal Screens - Retrofit Drilling Guidelines
Assembly Instructions
1
/”
1
4
table C
6”
5 /”
3
8
Drilling Guidelines for Screen Model - 23” Wide
6”
5 /”
3
8
table C
1
/”
1
4107/”
16
Drilling Guidelines for Screen Models - 29
”&35”
Wide
107/”
16
9 /”
7
89 /”
7
8
table C
1
/”
1
4137/”
16
Drilling Guidelines for Screen Model - 46” Wide
137/”
16
127/”
8
127/”
8
Universal Screens - Retrot
Drilling Guidelines
Note: If tables do not have
pre-drilled holes under the tabletops
for installing screens, retrofitting will
be required.
1. Take note of correct retrofit drilling
guideline illustrations for mounting
adjustable mechanisms or
fixed-height brackets to tabletops.
Depending on the table unit ordered,
the length of the tabletop determines
the appropriate size of the Universal
Screen. Reference the “Universal
Screen Selection Chart” to determine
appropriate retrofit drilling
guidelines.
2. Position the adjustable mechanism
or fixed-height bracket under the
tabletop surface at the designated
location. Using the mechanism or
bracket as a drilling template, mark
the mounting hole locations, making
sure the mechanism or bracket is
parallel to the edge of the tabletop.
Then use an 1/8” drill to bore pilot
holes 1/2” deep at each marked
location.
Note: Height-adjustable screen
models (USPF and USFA) are
available with 24” and 31” high
screens, while fixed-height models
(USPFF and USFAF) are available
with 24” and 31” high privacy
screens and 29” high privacy screen
with modesty panel.
Table
Length(s)
Screen Models
(USFAXXXX,
USFAXXXXF,
USPFXXXX &
USPFXXXXF)
N/A 2324, 2329, 2331
30” 2924, 2929, 2931
36” & 42” 3524, 3529, 3531
48” 4624, 4629, 4631
54” 5224, 5229, 5231
60” 5824, 5829, 5831
66” 6424, 6429, 6431
70” 7024, 7029, 7031
84”* 8224, 8229, 8231
Universal Screen
Selection Chart
*Designed for Toggle Square Shoe
Tables with a 84” side.
127/”
8
Drilling Guidelines for Screen Model - 52” Wide
137/”
16 137/” 16
127/”
8
11/”
2
21/”
8
1
/”
1
4
table C

7
Universal Screens - Retrofit Drilling Guidelines
Assembly Instructions
table C
1
/”
1
4
227/”
16
217/”
8
1/”
2
21/”
8
Drilling Guidelines for Screen Models - 58”, 64” & 70” Wide
227/”
16
217/”
8
Universal Screens - Retrot
Drilling Guidelines
Note: If tables do not have
pre-drilled holes under the tabletops
for installing screens, retrofitting will
be required.
1. Take note of correct retrofit drilling
guideline illustrations for mounting
adjustable mechanisms or
fixed-height brackets to tabletops.
Depending on the table unit ordered,
the length of the tabletop determines
the appropriate size of the Universal
Screen. Reference the “Universal
Screen Selection Chart” to determine
appropriate retrofit drilling
guidelines.
2. Position the adjustable mechanism
or fixed-height bracket under the
tabletop surface at the designated
location. Using the mechanism or
bracket as a drilling template, mark
the mounting hole locations, making
sure the mechanism or bracket is
parallel to the edge of the tabletop.
Then use an 1/8” drill to bore pilot
holes 1/2” deep at each marked
location.
Note: Height-adjustable screen
models (USPF and USFA) are
available with 24” and 31” high
screens, while fixed-height models
(USPFF and USFAF) are available
with 24” and 31” high privacy
screens and 29” high privacy screen
with modesty panel.
Table
Length(s)
Screen Models
(USFAXXXX,
USFAXXXXF,
USPFXXXX &
USPFXXXXF)
N/A 2324, 2329, 2331
30” 2924, 2929, 2931
36” & 42” 3524, 3529, 3531
48” 4624, 4629, 4631
54” 5224, 5229, 5231
60” 5824, 5829, 5831
66” 6424, 6429, 6431
70” 7024, 7029, 7031
84”* 8224, 8229, 8231
Universal Screen
Selection Chart
*Designed for Toggle Square Shoe
Tables with a 84” side.
1
/”
1
4
277/”
8
28 /
7
16” 28 /
7
16”
11/”
2
21/”
8
277/”
8
Drilling Guidelines for Screen Model - 84” Wide
table C

Universal Screens
Assembly Instructions
1330 Bellevue Street • P.O. Box 8100 • Green Bay, WI 54308-8100 • Tel [phone] • www.ki.com
© 2020 Krueger International, Inc. All Rights Reserved • Code KI-AI-000017R2/KI/PDF/1020