Koden CVS-126 User manual

L:6.0 H:6.0 R:M 12.0V
①②③④⑤
⑥
⑦
Schools of fish
Depth scale
Bottom
Depth
Oscillating line
L
H
Image speed
Interference rejection
Color rejection
Noise rejection
Shift
Press
Power on.
Keep pressing for
more than 3 seconds.
Power off.
Power on/Power off (【BRILL】key)
①Gain setting
H：High frequency
L : Low frequency
④Alarm Set Status
※The menu appears.
Press
Display the menu (【MENU】 key)
Press
※The menu
closes.
Adjust
D.range
Display1
Display1
Alarm1
Alarm1
NAV
Image
System
Next
Image speed
IR
Color rejection
Noise rejection
TVG
TX power
Gain (TD)
Return
Speed5
Strong
０％
０
Medium
Auto
AF : Fishing mode
AC : Cruising mode
※The number shows the
②Range mode
R:M : Manual
R:A : Auto range
R:AS : Auto shif
t
Water temp alarm
Speed alarm
Arrival alarm
XTE alarm
⑤Status of [FUNC] key assignment Zoom range
Zoom start
A
scope
White line
Background color
⑥Time mark
⑦Rainbow pattern
※The navigation data such as GPS is necessary.
Preset the destination / Preset the image (【EVENT】key)
Press
Depending on the [EVENT key set], the function differs.
In case of [Store image]:
Store the destination.
Store the image of echo sounder.
Press
In case of [Store pos]:
present set value of gain.
③Power Voltage
Press
Select the range (【▲RANGE▼】 key)
Press
Rotate
Press
Press
※Select by
performing
either
operation.
５０．０
１００
１６０
３００
５００
Range
Auto range
５．０
１０．０
２０．０
Auto shift
0093132704-03
※Every time when pressing the [BRILL] key,the item is
alternately displayed.
Press
A
djust the brilliance (【BRILL】key)
Rotate
Rotate
Press
Press
Panel brill
１０
Lcd brill
１０
Gain adjust / Gain select (【Knob】key)
Press Press
Press
Rotate
Press
A
djust
A
uto ad
j
us
t
０
Gain
９．０
Manual
Gain select
Fishing
Cruising
Press
or
Rotate
or
Select
Press
Select the dis
p
la
y
menu
(
【DISP】ke
y)
Press
Rotate
Press
Press
NAV２
Normal（L）
Zoom（L）
Dual freq
Zoom（H）
Normal（H）
NAV１
Disp
※Select by
performing
either
operation.
Select the setting of preset function (【FUNC】key)
Press Press
Rotate
Press
The function differs depending on the [FUNC key setting].
In case of [Image speed]:
※By continuously pressing the [FUNC] key, a function
assigned to [FUNC] key can be selected.
Press
※Select by
performing
either
operation.
Speed8
Speed7
Speed6
Speed5 (1/1)
Stop
Speed4
Speed3
Speed2
Speed1
Image Speed
Speed9

Open the
menu Select the menu name Select the set item Change the
set content
Close the menu
1st time: The menu returns to the set item.
2nd time: The menu returns to the menu name.
The selection and the change
of set content can be performed
by rotating the knob.
①Change the image speed.
The image speed becomes slow in order of [Speed1]→[Speed2]→・・・→
[Speed9].When [stop] is selected, the image stops.
②It rejects the interference with other echo sounder.
When [Strong] is selected, the effect of rejection is strong.
③It rejects the weak noise appeared on the display.
The greater the number is, the stronger the rejection becomes.
④It rejects the speck-like noise appeared on the entire image.
The greater the number is, the stronger the rejection becomes.
⑤Set the TVG.
The deep depth gain increase in order of [Weak]→[Medium]→[Strong].
⑥It sets the TX power.
⑦The reduction in sensitivity due to signal attenuation in Gain(TD)
use and so on can be corrected.
You can make numerical value bi
gg
er at the time of lack of sensitivit
y
.
①It sets the quantity of movement of shift.
②It selects the kind of the zoom type.
③It sets the range of image
selected in ②.
④It sets the zoom starting position of
image set in ②.
⑤It selects the disp width.
⑥It presets the range.
Zoom
Zoom ran
g
e
Zoom start
A
djust
D.range
Display1
Display2
A
larm1
A
larm2
NAV
Image
System
Shift step 1m
Zoom type BTM.
Zoom range 10.0m
Zoom start 0m
Disp width Center
Range preset
Return
①
②
③
④
⑤
⑥
●Function of display range set menu
A
djust
D.range
Display1
Display2
A
larm1
A
larm2
NAV
Image
System
Image speed Speed5
IR Strong
Color rejection 0％
Noise rejection 0
TVG Medium
TX power
A
uto
Gain(TD)
①
②
③
④
⑤
⑥
●Function of Adjust Set Menu
Close the menu
●How to operate the menu
Return ⑦
Next
Next
●Preset of Range
Registration of the range can be easily changed with following operation. Preset the set value suitable for you purpose.
Press
Press
Rotate
Press Press Press
Rotate
Press
*Select by performing
either operation.
*Select by performing
either operation.
Press
50.0
100
160
300
500
5.0
10.0
20.0
A
uto shift
0093132704-03
A
uto range Range 5.0
Range