Koden CVS-FX2 User manual

*To open menu list, or sub-menu list
Push
Display Menu List ([MENU] key)
Push
*To close the
menu list
Push
Echo Adjust
TVG
Disp. Setup1
Disp. Setup2
Range Setup
Shift Setup
BTM Search
Alarm1
Alarm2
NAV
IR
Color
Noise Rejection
TX Power(HF)
TX Power(LF)
Dynamic Range
High
0%
0
100
100
24dB
Return
Background Color Blue
Color Tone 64 colors
(1) Range Mode
Blank
Auto Range
Auto Shift
(2) Normal/Zoom Normal Zoom
(3) Shift status Same Indiv.
(4) Range status Same Indiv.
(5) Gain setting
H1
H2
L1
L2
*Vaule stands for current setting.
(6) CM status ~
Gain adjustment
Turn
To switch adjust
screen
To adjust gain, use the following GAIN knob:
1 screen: GAIN-R knob
2 screens:GAIN-R knob for the right screen, GAIN-L knob for the left
3/4 screens:GAIN-R knob for the 2 right screens, GAIN-L knob for 2 left.
Use GAIN-R knob for the middle screen, in case of 3 screens.
9.0
Turn
Disappears in
a given time
Push
Adjust
Image
Manual set
Explanation of header icons
Push
Select Range ([▲RANGE▼] key)
Disappears in
a given time.
100m
Setting range is
displayed *Not valid during Auto Range.
*In case the same range for all screens
Push
Disappears in
a given time
100
Setting shift is
displayed*Not valid during Auto Shift.
*In case the same range for all screens
Set Shift ([▲SHIFT▼] key)
Push
Turn OFF Shift ([SHIFT/ M OFF key])
Returns to
the preset
value
Shift setting
turns to zero
Push
Push
Power ON
Keep pressed longer than 3 seconds
Power OFF
Power ON/OFF ([BRILL] key)
*Changes each time [BRILL] key is pushed.
Push
Adjust Brightness ([BRILL] key)
Push Push
Push
LCD Brill
10
Panel Brill
10
Push
Select Settings of Saved Function ([F1]/[F2] key)
Push Push
Push
*Either operation
is possible
Function depends on setting by [F1 key setting]
Long push [F1] or [F2] key
to select function to assign
Push
[F2 key setting]
can be done
similarly
High
Lo
w
OFF
IR
*Navigation data (eg. GPS) is
required.
Store Position / Store Image ([EVENT] key)
Push
Function depends on setting by [EVENT key setting]
[Store Position]
[Store Image]
To save waypoint
To save image of echo sounder
Push
(7) Alarm set status
Arrival Bottom
XTE Fish
(8) Image Speed
Speed1 Stop Speed2 Speed3-9
(9) [EVENT] key assignment
Store Position Store Image Homing
(10) [F1] [F2] key assignment
:
::
:
:
:
:
Shift Digit Input A Scope
IR Image Swap
Color Erase Image Title
Noise Rejection VRM Interval
Background Color Sona-Tone
TVG Adjust NAV Start
White Line Image Recall
W. Temp
Speed
Manual
Auto Range
Auto Shift
Hi-Freq. 1
Hi-Freq. 2
Lo-Freq. 1
Lo-Freq. 2
(1) (2) (3) (4) (5) (6) (9) (7) (10)
(8)
(11)
(12)
(11) SD Card* *(11)(12) are only for
(12) USB Memory* CVS-FX2/FX2BB
0093101116-01

Push the CM button to recall the preferred settings.
Push
to open
menu list
Select
menu
name
Select
items
to set
Change
settings
Push to close
menu list
x1: Back to setting items
x2: Back to menu name
●To change zoom range and shift position of partial zoom
●To change contents of CM (Condition Memory) keys
Push to close
menu list
●To change contens of CM Menu
●To operate menu
Settings for screen configuration, adding zoom screen and frequency change can be done in the CM menu to
your preference.
Push the red-lit
CM button.
Push
Frequency
75.0
Push
Next change can be repeated.
Push
レンジ
To change the zoom screen range to your preference.
Push
To change the shift position of partial zoom screen.
Setting range is
displayed.
Push
Zoom icon of
header turns to
enlarge.
10 m Disappears in a given time.
Push
10.0
Setting shift is
displayed.
Disappears in a given time.
Move the green
cursor onto the
item to change. Push to close
CM menu
Push
One set of the setting values can be switched by using CM keys.
Some setting items are in common use, such as language selection, types of Transducers, etc.
Swithing by CM1 to CM6 keys makes it possible to use functions as if you were using 6 different echo
sounders.
You can switch the settings simply by pushing buttons, among the preferred values saved for different fish
types, seasons, fishing points.
CM currently in
use is lit red.
Push to switch to
the setting values in
each CM button.
0093101116-01