Koden CVS-FX2BB Assembly instructions

Declaration of Conformity
(As referred to in Annex IV 2. of Directive 2004/108/EC)
Declares under his sole responsibility that the produced Echo Sounder manufactured by
Koden Electronics Co., Ltd.
5278 Uenohara
Uenohara-Shi,
Yamanashi-Ken
409-0112, Japan
Telephone [phone] Telefax [phone]
Identified by the type number CVS-FX2 to which this declaration refers conforms to the
relevant essential requirements of Directive 2004/108/EC and is in conformity with the EMC
requirements of EU harmonised standard
EN 60945: 2002 ( Clauses 9,10 & 12 )
Authorised representative in Europe
Heinz Hoghoff
Koden Elektronik GmbH.
Am Gewerbepark 15
D-64823, Gross–Umstadt
Germany.
Phone [phone]
Telefax+49 6078 73824
Signed :
Heinz Hoghoff,
Dated : 19 Jul. 2012 Document No. 72-2731U-X004
N.B. As this product is for Maritime use compliance with Directive 72/23/EEC is not required.

Declaration of Conformity
(As referred to in Annex IV 2. of Directive 2004/108/EC)
Declares under his sole responsibility that the produced Echo Sounder manufactured by
Koden Electronics Co., Ltd.
5278 Uenohara
Uenohara-Shi,
Yamanashi-Ken
409-0112, Japan
Telephone [phone] Telefax [phone]
Identified by the type number CVS-FX2BB to which this declaration refers conforms to the
relevant essential requirements of Directive 2004/108/EC and is in conformity with the EMC
requirements of EU harmonised standard
EN 60945: 2002 ( Clauses 9,10 & 12 )
Authorised representative in Europe
Heinz Hoghoff
Koden Elektronik GmbH.
Am Gewerbepark 15
D-64823, Gross–Umstadt
Germany.
Phone [phone]
Telefax+49 6078 73824
Signed :
Heinz Hoghoff,
Dated : 17 Feb. 2012 Document No. 71-2731U-X013
N.B. As this product is for Maritime use compliance with Directive 72/23/EEC is not required.

CVS-FX2/FX2BB Document Revision History
0093102002-03 i
CVS-FX2/FX2BB Basic Operational Manual
Doc No. 0093102002
Document Revision History
No. Doc. No-Rev. No. Date revised
(Y/M/D) Revised content
0 0093102002-00 2012/02/20 First edition
1 0093102002-01 2012/12/10 Declaration
2 0093102002-02 2014/03/10 Revision:
(From software KM-F15 Ver. 1.01 34 to Ver. 1.** **)
3 0093102002-03 2014/04/14 Revision:
(From software KM-F15 Ver. 1.01 35 to Ver. 1.** **)
4
5
6
7
8
9
10
Document No. Revised Version Norm
When part of the document needs to be revised, the document has advanced revision number. The
document No. is indicated at the lower right side on the cover and at the left or right side of the footer
region of each page.
© 2012-2014 Koden Electronics Co., Ltd. All rights reserved.
No part of this publication may be reproduced, transmitted, translated in any form by any means
without the written permission of Koden Electronics Co., Ltd. The technical descriptions contained in
this publication are subject to change without notice. Koden assumes no responsibility for any errors,
incidentals or consequential damages caused by misinterpretation of the descriptions contained in this
publication.

Important Notice CVS-FX2/FX2BB
ii 0093102002-03
Important Notice
For copy and transcription of this Operation Manual (hereinafter referred to as this
manual), permission from Koden is needed. Koden prohibits the un-authorized copy and
transcription of this manual.
If this manual is lost or damaged, consult a dealer of Koden or Koden.
The specification of the products and the contents in this manual are subject to change
without notice.
The contents displayed on the menu of product may be different from the expression of
this manual. The fonts and shapes of the keys and menus in the illustration may differ
from the actual ones, and some parts may be omitted.
Koden is not liable for damages and troubles arisen from misunderstanding of the
contents in this manual.
Koden is not liable for any damages caused by earthquake, lightning, wind and flood
damage and fire for which Koden is not responsible, and actions by third parties, other
accidents, customer’s unintended error/abuse and the use under other abnormal
conditions.
Koden is not liable for damages of accompaniment (change/loss of memorized content,
loss of business profit, stop of business) arisen from use or failure of our products.
If the stored data are changed or lost, irrespective of causes of troubles and damages,
Koden is not liable for them.
Koden is not liable for any damages arisen from malfunction caused by combination of
software and connected equipment in which Koden is not engaged.

CVS-FX2/FX2BB For Your Safe Operation
0093102002-03 iii
For Your Safe Operation
Symbol used in this Operation Manual
The following pictograms are used in this manual. The meaning of each symbols shall be well
understood and the maintenance and inspection shall be carried out.
Symbol Meaning
Mark for warning
This mark denotes that there is a risk of death or serious injury when dealt
with incorrectly.
Mark for danger of high voltage
This mark denotes that there is a risk of death or serious injury due to
electric shock when dealt with incorrectly.
Mark for caution
This mark denotes that there is a risk of slight injury or damages of
devices when dealt with incorrectly.
Mark for prohibition
This mark denotes prohibition of specified conducts. Description of the
prohibition is displayed near the mark.
Caution items on equipment
Be careful of high voltage inside
High voltage, which may risk your life, is used. This high voltage may
remain in the circuit even after the power is switched off. To prevent
contact with the high voltage circuits accidentally, a protective cover or
the label with this mark is provided on the high voltage circuit. When the
inside is to be checked, ensure to switch off the power and to discharge
the residual voltage for safety. An engineer authorized by Koden shall
carry out the inspection and maintenance works.
Power off in the boat
An accidental power-on during works may result in worker’s
electrification. To prevent such accident in advance, ensure that power
in the boat and on the equipment are switched off. Furthermore, it is
safer to hang a caution tag saying “Under work” near the power switch
of equipment.
Be careful of dust
Inhaled dust may cause respiratory affection. At the time of cleaning the
inside of equipment, be careful not to inhale dust. Wearing a safety
mask is recommended.
Warning
Warning
Caution
Warning

For Your Safe Operation CVS-FX2/FX2BB
iv 0093102002-03
Caution on location of installment
The equipment shall not be installed at locations which are excessively
damp and suffers from water drops. Otherwise, dew condensation may
occur inside the display screen, and corrosion may occur inside the unit
box.
Measures against static electricity
Static electricity may be generated from the carpet on the floor in the
cabin or clothes made of synthetic fiber, and it may destroy the
electronic components on circuit boards. The circuit boards shall be
handled with appropriate measures against static electricity.
Caution at installation of transducer
Transducer shall be installed at locations where there is no effect by
bubble and noise. Bubble and noise may seriously degrade the
performance of this equipment.
Cautions on handling
No disassembly or modification of this equipment is allowed. It may lead
to failure, firing, smoking or electric shock. In case of failure, please
contact Koden’s dealers or Koden.
In case of smoking or firing, switch off the power in the boat and of this
equipment. It may lead to firing, electric shock or damages.
Be careful of residual high voltage
High voltage may remain in capacitors for several minutes after
switching off the power. Before inspection of the inside, please wait at
least 5 minutes after switching off or discharge the residual electricity in
an appropriate manner. Then, start the work.
The information displayed on this equipment is not intended to use for
your navigation. For your navigation, be sure to see the specified
materials.
Please use the specified fuses. If un-specified fuses are used, they may
cause firing, smoking or damages.
Be sure to submerge the transducer in water before transmission. If
not, it may be damaged.
Caution
Caution
Caution
Warning
Warning
Caution
Caution
Caution

CVS-FX2/FX2BB Contents
0093102002-03 v
Contents
Document Revision History .......................................................................................................i
Important Notice ....................................................................................................................... ii
For Your Safe Operation .......................................................................................................... iii
Contents ...................................................................................................................................v
Introduction............................................................................................................................. vii
Chapter 1 Preparation............................................................................................1-1
1.1 To use keys..................................................................................................................... 1-1
1.2 Power On/Off .................................................................................................................. 1-3
1.2.1 Power On............................................................................................................................ 1-3
1.2.2 Power Off............................................................................................................................ 1-4
1.2.3 Power Voltage Alarm .......................................................................................................... 1-4
1.3 Selection of language to be displayed............................................................................ 1-4
1.4 To use Menu ................................................................................................................... 1-5
1.4.1 Open/Close the Menu ........................................................................................................ 1-5
1.4.2 Operation of the Menu........................................................................................................ 1-6
1.4.3 Open/Close of Submenu .................................................................................................... 1-8
1.4.4 Operation of SUBMENU..................................................................................................... 1-9
1.5 To read echo sounder’s screen......................................................................................1-11
1.6 Adjustment of brilliance for comfortable viewing ....................................................... 1-14
1.6.1 Adjustment of LCD brilliance ............................................................................................ 1-14
1.6.2 Adjustment of panel brilliance .......................................................................................... 1-15
Chapter 2 Basic operation .....................................................................................2-1
2.1 Switch screen images (Setting up of CM menu)............................................................. 2-1
2.1.1 Display of 1-frequency/displays of 2-frequency and more ................................................. 2-1
2.1.2 Setting frequency to match the transducer to be used ...................................................... 2-3
2.1.3 Displaying of zoom images ................................................................................................ 2-6
2.1.4 Display of mixed images .................................................................................................. 2-15
2.1.5 Selection of pulse length .................................................................................................. 2-19
2.1.6 Selection of frequency bandwidth .................................................................................... 2-22
2.1.7 Selection of gain changing method .................................................................................. 2-25
2.2 Adjustment of echo sounder ......................................................................................... 2-26
2.2.1 Switching of depth range mode........................................................................................ 2-26
2.2.2 Switching of Normal/Zoom for range and shift operation................................................. 2-28
2.2.3 Manual change of a range for normal image ................................................................... 2-29
2.2.4 Manual change of shift positions of normal images ......................................................... 2-36
2.2.5 Adjustment of image gain................................................................................................. 2-46
2.2.6 Adjustment of TVG ........................................................................................................... 2-55
2.3 Changing of the image scroll speed ............................................................................. 2-67
2.4 Finding out depth of targets in images (VRM operation) .............................................. 2-69
2.4.1 Changing of VRM follow interval ...................................................................................... 2-70
2.4.2 Operation of VRM in Active Screen.................................................................................. 2-72
2.4.3 Operation of VRM on all Screens..................................................................................... 2-74
2.5 Reduction of noise on images ...................................................................................... 2-76
2.5.1 To reject interference........................................................................................................ 2-76
2.5.2 To erase the weak response from dust and plankton, etc................................................ 2-80
2.5.3 To reduce noise ................................................................................................................ 2-85
Chapter 3 To make the best of [CM] keys.............................................................3-1
3.1 To use [CM] keys ............................................................................................................ 3-1

Contents CVS-FX2/FX2BB
vi 0093102002-03
3.1.1 To use [CM] key for switching screen modes ..................................................................... 3-2
3.1.2 To use [CM] keys as one touch switch to the memorized setting to the fishing positions.. 3-6
3.1.3 Use [CM] keys as screen mode switching and one touch switch of setting: .................... 3-10
Chapter 4 Useful operation ................................................................................... 4-1
4.1 Temporary change of images for better view .................................................................. 4-1
4.2 Use function keys ([F1]/[F2])........................................................................................... 4-1
4.2.1 To use function keys ([F1]/[F2]) .......................................................................................... 4-1
4.2.2 Assign intended operation to function keys ([F1]/[F2]) ....................................................... 4-2
4.3 Switching of range mode ................................................................................................ 4-3
4.3.1 Switch to manual operation ................................................................................................ 4-3
4.3.2 Setting of auto range .......................................................................................................... 4-4
4.3.3 Setting of auto shift ............................................................................................................. 4-6
4.4 To use event key ............................................................................................................. 4-8
4.4.1 Registration of waypoints.................................................................................................... 4-8
4.4.2 To store images .................................................................................................................. 4-8
4.4.3 Starting up Homing ............................................................................................................. 4-9
4.4.4 Selection of event key function ......................................................................................... 4-10
4.5 Shortcut to range registration menu.............................................................................. 4-12
4.6 To move the position of menu ....................................................................................... 4-13
Chapter 5 Index...................................................................................................... 5-1

CVS-FX2/FX2BB Introduction
0093102002-03 vii
Introduction
CVS-FX2 is the 15inch LCD color echo sounder that can display images in 4 optional
frequencies.
CVS-FX2BB is the Black Box type without the display unit of CVS-FX2, for which customer
can select the display monitor of preference. The external monitor and connecting cable are
user supply.
This unit equipped with the latest digital process can accurately display circumstances in the
water under all conditions.
The main features of this unit are as follows:
This unit is a multi-frequency echo sounder with broadband transducers.
With a simple operation on a menu, frequencies up to 4 can be optionally set within a wide
range.
With digital reception processing, the high resolution in shallow depth and the noise
reduction capability in deep depth are both attainable. In addition, optimum images can be
displayed by the auto mode function.
The high-performance LCD maintains high visibility under any conditions. (Only CVS-FX2 )
With adoption of a special filter (AR coated), images can be seen clearly even under the
direct sunlight. Well protected against reflection on the LCD screen and dew condensation.
(Only CVS-FX2 )
This unit has high waterproof level and can be installed in an open bridge. (Only
CVS-FX2 )
Sona-ToneTM (Sonar sound) function provides fish school status by sound..
Up to 500 graphic images can be stored. Homing function is available by pushing event
key while recalling the stored images, to provide navigation guidance to the designated
position (optional GPS is required).
Various alarm functions are available (Bottom, school of fish, water temperature*, vessel
speed*, arrival*, XTE*, power source).
(Note: The mark * denotes that the connection of optional sensors is required)
The display and the operation units can be easility installed from the front side by flush
mounting. (Flush mounting of monitor is only for CVS-FX2).
RGB analog output to an external monitor is provided as standard. The use of external
monitor enables to observe the echo sounder images from the place distant from the main
unit (External monitor is owner supply).
The data for image, waypoint, and setting can be backed up in the USB memory and the
SD card, to be recalled later.
As the operation unit is separated, operation away from the processor and the display units
is possible.

C
V
00
9
1.1
N
O
1
2
3
4
5
6
7
8
9
1
0
1
1
1
2
1
3
1
V
S-FX2/F
X
9
3102002-0
3
To use ke
y
O
.
[BRILL
2
[SHIF
T
3
[▲SHI
F
4
[▲RA
N
5
[NOR
M
6
[GAIN-
(Gain
k
7
[GAIN-
(Gain
k
8
[CM1]
•
9
[F1] (F
u
0
[F2] (F
u
1
[SUB
M
2
[CURS
3
[MEN
U
2 3
X
2BB
3
y
s
Key Na
m
]
T
/ M OFF]
F
T▼]
N
GE▼]
M
AL/ZOOM]
L/SEL]
k
nob)
R/SEL]
k
nob)
•
• • [CM6]
u
nction key
u
nction key
M
ENU]
OR]▲▼
U
]
4 5
Chapt
e
Key boa
r
m
e
1)
2)
6
e
r 1 Pr
e
r
d of CVS-
F
Press:
P
panel.
Long-p
r
Press:
S
Long-p
r
(Auto r
a
Chang
e
Chang
e
Press:
[RANG
E
Long-p
r
Rotate:
Press:
S
side
Rotate:
Press:
S
side
Press:
R
Switch
e
Long-p
r
Press:
R
Long-p
r
Press:
R
Long-p
r
Opens
/C
Return
t
Selects
Chang
e
Moves
t
Chang
e
Press:
O
C
Long-p
r
7
e
parati
o
F
X2/CVS-
F
P
ower on.
A
r
ess: Power
S
witches O
N
r
ess: Chang
a
nge/Manu
a
e
s the shift
p
e
s the range
Switches
E
] [SHIFT]
k
r
ess: Short-
c
Gain adjus
t
S
witches of
Gain adjus
t
S
witches of
R
ecalls CM
e
s screen m
o
r
ess: Starts
R
ecalls dire
c
r
ess: Select
s
R
ecalls dire
c
r
ess: Select
s
C
loses the
S
t
o the Men
u
item of Me
n
e
s the settin
g
t
he markers
e
s the Shift.
O
pens/Clos
e
C
loses sub
m
r
ess: Activa
t
Menu/Su
b
8
C
h
n
X2BB
Descripti
o
A
djusts brilli
a
off.
N
/OFF of S
h
es of range
l/Auto Shift
)
p
osition sett
setting.
NORMAL/
Z
k
eys.
c
ut to the ra
n
t
ment at lo
w
operation
s
t
ment at hig
h
operation s
c
(CM: Condi
t
o
des
c
opy o
f
CM
c
tly the item
s
and saves
c
tly the item
s
and saves
S
ubmenu.
of the prev
i
n
u/Submen
u
g
values for
(VRM, eve
n
e
s the Men
u
m
enu and c
o
es function
t
menu positi
9 10
hapter 1
P
on
a
nce of the
h
ift
mode
)
t
ing.
Z
OOM ass
nge setting
w
frequency
s
s
creen at lo
w
h
frequenc
y
c
reen at hig
t
ion Memor
y
m
registered.
s
the item to
m
registered.
s
the item to
ious operati
u
the Menu/
S
n
t).
u
.
o
ntrol boxe
s
to move
i
on on the s
c
14
11 12
P
reparatio
n
1-1
screen an
d
i
gnment o
f
menu.
s
ide
w
frequenc
y
side
h frequenc
y
y
. See P2-1
)
registe
r
register.
on
S
ubmenu.
s
.
c
reen.
15 16
13
n
d
f
y
y
)

Chapter 1
1-2
14 [←
15 [E
V
16 [E
N
There are
1. Pres
s
2. Long
Normal op
When the
displaye
d
[GAIN-L/S
control.
Operation
1. Rota
t
2. Pres
s
Preparati
│
←/NAV]
V
ENT]
N
T]
two types
o
s
: Press th
e
-press: Ke
e
eration is d
relevant ke
d
. Release t
EL] knob
of the gain
t
e: Turn th
e
s
: Press th
e
on
o
f pressing
o
e
key with
a
e
p pressed
one with [
P
y is long-p
r
he finger fr
o
a
n
knobs are
i
e
knob cloc
k
e
top of the
Pre
s
Lon
Pre
s
Lon
En
d
Te
m
o
f keys, wh
a
finger and
until the sc
r
P
ress].
r
essed, the
o
m the key,
n
d [GAIN-
R
i
n two way
s
k
wise or an
t
knobs.
s
s: Change
s
g-press: Di
s
s
s: Outputs
cursor p
o
Starts h
o
g-press: Di
s
d
s input of s
e
m
porary era
s
ich are Pre
release im
m
r
een displa
y
control bo
x
,
once the
c
R
/SEL] kno
b
s
, [Rotate]
a
t
iclockwise
s
the image
s
plays the n
the presen
t
o
sition in T
L
o
ming.
s
plays the i
m
e
tting value
s
ing of displ
a
s
s and Lon
g
m
ediately.
y
responds
x
of the fun
c
c
ontrol box
i
b
a
nd [Press].
CV
S
scroll spee
d
a
vigation s
c
position or
L
L sentence
s
m
ages of C
C
digits for M
e
a
yed items
o
g
-press.
.
c
tion define
s displaye
d
are the
k
S
-FX2/FX
2
009310200
2
d
.
c
reen.
the event
s
. Store im
a
C
D camera.
e
nu/subme
n
o
n screen.
e
d for the k
e
d
.
k
nobs for
g
2
BB
2
-03
a
ge.
n
u.
e
y is
g
ain

C
V
00
9
1.2
1.2
Pr
e
Th
e
aut
bel
o
V
S-FX2/F
X
9
3102002-0
3
Power On
.1 Power
O
e
ss the [BR
I
e
start-up
s
omatically
o
w.
Cauti
o
pa
n
co
n
Cauti
o
is t
u
Cauti
o
su
p
tak
e
Ple
a
mi
n
Ple
a
1)
P
2)
P
X
2BB
3
/Of
f
O
n
I
LL ] key
s
creen is
d
checked. I
f
o
n: If an e
r
n
el blink t
o
n
tact a dea
C
V
KM-F1
5
o
n: Please
u
rned on.
I
o
n: You
m
p
ply is mo
m
e
s approxi
m
a
se turn o
n
n
ute.
a
se take t
h
P
lease turn
P
lease turn
to
p
d
isplayed.
O
f
the chec
k
r
ror occur
s
o
indicate
l
e
r
of Kod
e
V
S-F
X
5
Ver.01 05
wait until
I
t takes ab
o
m
ay not b
e
m
entarily l
o
m
ately on
e
n
the pow
e
h
e followin
g
off the po
w
on the po
w
power on.
O
n start-u
p
k
ing compl
e
s
during th
e
possible
f
e
n or Kod
e
X
2
the fish fi
n
o
ut 30 sec
o
e
able to
o
o
st or inte
e
minute.
e
r again, in
g
steps to
w
er suppl
y
w
er suppl
y
p
, the inter
n
e
tes norma
l
e
memory
f
ailure of
t
e
n.
n
der scree
o
nds.
o
perate ke
y
r
rupted. P
l
case you
d
recover p
o
y
in accor
d
y
in accor
d
C
h
n
al memor
y
l
ly, the me
s
check, LE
D
t
he unit. I
n
n
is displ
a
y
s when t
ease wait
d
o not see
o
wer suppl
y
d
ance with
ance with
hapter 1
P
y
(ROM a
n
s
sage is di
Ds on the
n this ca
s
a
yed after
t
he onboa
r
for recov
e
e
recovery
a
y:
1.2.2 Pow
e
1.2.1 Pow
e
P
reparatio
n
1-
3
n
d RAM) i
s
splayed a
s
operation
s
e, please
t
he power
r
d power
e
ry which
a
fte
r
one
e
r Off.
er
On.
n
3
s
s

Chapter 1
1-4
1.2.2 Po
w
Keep pre
s
power shu
After 15 s
e
1.2.3 Po
w
When no
n
generates
1.3 Select
When the
screen is
d
Select a l
a
To decide
t
C
a
C
a
Preparati
w
er Of
f
s
sing the [
B
t down, wh
e
e
conds, po
w
w
er Voltag
e
n
standard
alarm.
ion of lan
g
power is s
w
d
isplayed.
a
nguage usi
t
he langua
g
a
ution: Th
e
a
ution: Th
e
V or lower
)
± 0.5 V.
on
B
RILL ] ke
e
n the indi
c
w
er is switc
h
e
Alarm
power volt
g
uage to b
e
w
itched on
ng [▲] key
g
e, press [
M
e
re are the
o
Pleas
e
Powe
r
e
power will
)
or high (3
4
y fo
c
ation belo
w
h
ed off aut
o
a
ge is de
t
e
displaye
d
for the firs
t
or [▼] key
M
ENU] key
o
ther langu
a
e
wait for a
w
r
shutdown
p
be automa
4
V or high
e
r 3 secon
d
w
is display
e
o
matically.
t
ected, th
e
d
t
time after
of .
.
ages than
E
w
hile.
p
rocess in
p
tically swit
c
e
r). The ac
c
d
s to powe
r
e
d, release
icon
installation
E
nglish an
d
p
rogress.
c
hed o
f
f wh
e
c
uracy of p
o
CV
S
r
off. After
the finger
o
start
s
,
the follow
i
Japanese
e
n the volt
a
o
wer voltag
e
S
-FX2/FX
2
009310200
2
countdow
n
o
ff from the
s
blinking
ing [Langu
a
for selecti
o
a
ge is low (
8
e indicatio
n
2
BB
2
-03
n
for
key.
and
a
ge]
o
n..
8
.5
n
is

C
V
00
9
1.4
CV
Th
e
1.4
To
d
Lis
t
sh
o
Op
e
gui
d
Fu
n
gui
d
Th
e
on.
Th
e
all
o
To
c
Th
e
V
S-FX2/F
X
9
3102002-0
3
To use M
e
S-FX2 and
e
operation
.1 Open/
C
d
isplay the
t
of menu i
t
o
wn below:
Nam
e
M
e
ration
d
e
n
ction
d
e
e
operation
(See the F
e
function
g
o
n. (See th
e
c
lose the
m
e
[MENU],
[
E
X
2BB
3
e
nu
CVS-FX2
B
of the both
C
lose the
M
menu, pre
s
t
ems, mes
s
e
of the sel
e
M
enu colu
m
guide is d
i
ull Menu Re
f
g
uide is dis
p
e
Full Menu
m
enu, press
[
Guide Win
d
E
cho Adjust
B
B have tw
o
menus is
b
M
enu
s
s the [ME
N
s
age boxes
e
cted Menu
m
n Settin
g
i
splayed w
h
f
erence “5.
2
p
layed whe
n
Reference “
[MENU] k
e
d
ow] and [
F
IR
o
kinds of
m
b
asically th
e
N
U] key
of operati
o
g
item colu
m
h
en [SUBM
2
.1 Display/
N
n
[SUBME
N
5.2.2 Displ
a
e
y .
F
unc. Guid
e
m
enu, [ME
e
same.
.
o
n guide an
d
Cur
s
m
n S
e
ENU], [Sy
s
N
o display
o
N
U], [Syste
m
a
y/No displ
a
e
Window]
o
C
h
NU] and [S
d
function
g
s
o
r
e
tting value
s
tem] and [
G
o
f Guide
W
m
] and [Fu
n
a
y of Func.
o
n the scre
e
hapter 1
P
UBMENU].
g
uide are d
column
G
uide Win
d
W
indow”)
n
c. Guide
W
Guide Win
e
n disappe
a
P
reparatio
n
1-
5
isplayed a
s
d
ow] are al
l
W
indow] ar
e
dow”)
ar
.
n
5
s
l
e

Chapter 1 Preparation CVS-FX2/FX2BB
1-6 0093102002-03
1.4.2 Operation of the Menu
Press [▲] key or [▼]keyof to select a menu item while Menu is displayed.
List of the setting items changes to the corresponding contents with the selected menu item.
Menu column Setting item column Setting value column
Press [ ] key of .
Then, a cursor appears in the Setting item column.
Menu column Setting item column Setting value column
Press [▲] key or [▼] key of to select the item to change.
Echo Adjust IR

C
V
00
9
Pr
e
Pr
e
Pr
e
ite
m
To
r
Th
e
Pr
e
V
S-FX2/F
X
9
3102002-0
3
Caution:
e
ss [ ] key
o
e
ss [▲] key
e
ss [ ] key
m
column.
return to th
e
e
n, the cur
s
e
ss [MENU]
X
2BB
3
Menu disa
p
o
f . .,
a
or [▼] key
of o
r
e
menu col
u
s
o
r
returns
t
key
p
pea
r
s whe
n
a
nd the set
t
of ,
r
[SUBME
N
u
mn, press
t
o the men
u
to close t
h
n
[MENU] k
e
t
ing box ap
p
to change
t
N
U] key
[]keyof
u
column.
h
e menu.
e
y is
p
ears with t
h
t
he setting.
. Then,
or
[
C
h
pressed du
h
e corresp
o
the cursor
[
SUBMEN
U
hapter 1
P
ring menu
o
o
nding sele
returns to
U
]key
P
reparatio
n
1-
7
o
peration.
c
tion items
.
the settin
g
.
n
7
.
g

Chapter 1
1-8
1.4.3 O
p
To di sp la y
List of Su
b
below:
Name
Operation
guide
Function
guide
The opera
on. (See t
h
The functi
o
all on. (Se
e
To cl os e t
h
[SUBMEN
Preparati
p
en/Close
o
the Subm
e
b
menu item
s
of the sele
Menu
c
tion guide
i
h
e Full Men
u
o
n guide is
e
the Full M
h
e Submen
u
U], [Guide
W
Syste
m
on
o
f Submen
e
nu, press t
h
s
, operatio
n
cted menu
c
olumn S
e
i
s displaye
d
u
Reference
displayed
w
enu Refere
n
u
, press [S
U
W
indow] a
n
m
E
v
u
h
e [SUBM
E
n
guide bo
x
e
tting item
c
d
when [S
U
“5.2.1 Disp
w
hen [SUB
M
n
ce “5.2.2 D
U
BMENU]
k
n
d [Func. G
u
v
ent Key U
s
E
NU] key
x
and functi
o
Curso
r
c
olumn
U
BMENU],
[
lay/No dis
p
M
ENU], [S
y
isplay/No d
k
ey o
uide Wind
o
s
age
.
o
n guide b
o
r
Setting val
[
System] a
n
p
lay of Guid
e
y
stem] and
isplay of F
u
r [MENU] k
e
o
w] disappe
CV
S
o
x are displ
a
ue column
n
d [Guide
W
e
Window”
)
[
Func. Gui
d
u
nc. Guide
W
e
y .
ar
.
S
-FX2/FX
2
009310200
2
ayed as sh
o
W
indow] ar
e
)
d
e Window]
Window”)
2
BB
2
-03
o
wn
e
all
are

CVS-FX2/FX2BB Chapter 1 Preparation
0093102002-03 1-9
1.4.4 Operation of SUBMENU
Press [▲] key or [▼] key of to select a menu item during SUBMENU is displayed.
List of the setting items changes to the corresponding contents with the selected Submenu
item.
Menu column Setting item column Setting value column
Press [ ]keyof .
Cursor appears in the setting item column.
Menu column Setting item column Setting value column
Press [▲] key or [▼] key of to select the item to change.
System Event Key Usage

Chapter 1
1-10
Cau
t
t
Then, pre
s
items.
Press [▲]
To return
t
of .
T
To return t
o
Then, the
c
To cl os e t
h
Preparati
t
ion: When
t
he display
s
s [ ] key
o
key or [▼]
t
he cursor
T
hen, the c
u
o
the menu
c
urso
r
retu
r
h
e menu, p
r
on
[MENU] k
e
of the Sub
m
o
f ,a
n
keyof
to the set
u
rso
r
retur
n
column, p
r
r
ns to the
m
r
ess [SUB
M
e
y is
p
m
enu will di
n
d the setti
n
tochan
g
item colu
m
n
s to the se
t
r
ess [◄] ke
y
m
enu colum
n
M
ENU] key
p
ressed du
r
sappea
r
.
n
g box app
e
g
e the setti
n
m
n, press [
t
item colu
m
y
of
n
.
or[M
E
r
ing operati
e
ars with t
h
n
g.
] key of
m
n.
or [SUBM
E
E
NU] key
CV
S
o
n of the S
u
e correspo
n
or [S
E
NU] key of
.
S
-FX2/FX
2
009310200
2
ubmenu,
nding sele
c
S
UBMENU]
f
.
2
BB
2
-03
c
tion
key