Lockly PRO User manual

HOOK SMART LOCK
MORTISEEDITION
INSTALLATION
GUIDE
PRO

Go to LOCKLY.com/pages/installation to watch a
video version of this installation guide.
Download the BILT app in the Apple or Google Play
store for step-by-step interactive 3-D walk-through
installation instructions. (Available for selected
models)
OR

@meetlockly | #LOCKLY
Connect with us

Welcome!
This guide will walk you through step-by-step how to
install and get your LOCKLY
®
Pro up and running.
Installation generally takes less than 30 minutes. If you
have any questions please reference our online sup-
port at: LOCKLY.com/support or call [phone]
for help.

Battery Cover
Interior Assembly
PM5 Screw
KM4*5.0MM Screw
Face Plate
PM4*12MM Screw
PM5×60mm Screw
Adhesive TAPE
I
K
2X
H
F
D
J
L
N4X
Exterior
M
G
2X W
4X
E
V
O
A
B
M
Adhesive TAPE
LOCKLY®Pro can be fitted for both right swing doors and left swing doors.
INSTALLATION OVERVIEW AND PARTS LIST Parts List
Labeled As Description
A Keys
BExterior Assembly
CExterior
DMounting Plate
E
F
G
H
I
JDeadbolt
KKA3.5*20MM Screw
LStrike Plate
NDust Box
W
V
UTF Card
U
LOCKLY.COM|HOTLINE: [phone]| EMAIL: [e-mail]
AUTHE NTIC LOCKLY PRODU CT|DESIGNED I N USA | CARD IS PRINTED WITH A SPECIFIC PATTER N
SECURE ADDITIONAL DOORS ATADISCOUNT: HTTP://WWW.LOCKLY.COM/MORE
ACC20200402
LOCK SERIAL
ACTIVATION CODE
PGDxxxxxxxxxx
xxxxxxxxSCAN & SAVE

Prepare door and remove existing lock. If necessary, use provided Installation
Template to prepare door.
1-⅜" (35mm)
to 2" (50mm)
3-⅞" (22mm)
2-⅜" (60mm)
*½"
12mm
4-⅛" (54mm)
3-3/4" (98mm)
* You are not required to drill a hole in your door. We have provide double sided adhesive
tape for you to help stabilize the lock during installation. Only drill a hole if you wish to have
added stability. Please refer to the provided templates for drilling if needed.
Optional: Door Hole Drill
3
Preparation
Phillips
Screwdriver
To complete the installation you will need:
Flathead
Screwdriver
Tape measure
or ruler

1. Extend the hook by inserting a
screwdriver on the cross hole
3. Insert the lockset to the edge door
hole, make sure hook is on the top and
the cross hole is on vertical position.
Secure the lockset with screws K (2X)
K(2X)
1
2
2. Unscrew and detach the face plate
(V).
4. Attach the Face plate (V) back to
the lockset (J). Secure face plate with
screws W (2X).
Vuse a
screwdriver
and screws
4
INSTALLING THE LOCKSET (J)
Step 1

*This hole (O) is for the optional Slotted Barrel
Extension provided for stabilizing your lock. It
will require drilling extra hole on your door
(See template as provided). Alternatively,
you may use the double-sided adhesive
tape provided which serves the same
purpose if you do not want to drill a hole. If
you drilled a hole, securely tighten the post
with a flathead screwdriver by turning it
clockwise before mounting on your door.
M
O
B
Peel paper off the
Adhesive tape
3: Place the exterior assembly to door by
inserting the torque blade on a vertical
position to the lockset cross hole. Guide the
cable to the side of the lockset. Secure the
exterior assembly with adhesive strips.
2: Before placing the exterior assembly on
the door, make sure the torque blade is in
vertical position and the hook is extended.
1: To secure Exterior Assembly of lock, peel the cover off the adhesive strips
Vertical
Hook is extended
Torque blade in vertical position
Cable goes to the
side the lockset
5
INSTALLING THE EXTERIORASSEMBLY(B)
Step 2

1: Check the mounting plate alignment
to your door hole before you peel of the
cover off the adhesive strip.
4: After securing the mounting plate,
use the key to ensure hook locks and
unlocks smoothly (no binding or rubbing).
IMPORTANT: when finished, leave the
hook extended and remove the key
before proceeding to the next step.
2: Place the mounting plate on the
interior side of the door. Guide the
cable to the opening ear on the side
of mounting plate and make sure the
torque blade is at the center of the
mounting plate.
(2X)
If you have drilled a hole on the top,
please secure the hole with screw. Put
inside a red circle . Skip this if no hole was
drilled.
Secure the cable
to the lower left
notched hole.
3: Insert and tighten by hand 2 screws
located on the left and right of the blade.
Check alignment and tighten with screw-
driver until mounting plate is securely
placed on door.
6
INSTALLING THE INTERIOR ASSEMBLY (F)
Step 3
G
G
Remove key when finished
Leave deadbolt extended
E
G
E

Plug the cable coming through mounting plate in to the interior assembly (F) as
shown. Tuck cable under eyelet hooks and route to the right on interior assembly .
Plug into , match red side
of plug with red on socket - insert
tightly.
7
INSTALLING THE INTERIORASSEMBLY (F)
Step 3
X
X Y
Y
E
F
NOTE: If you need to discon-
nect the cable, make sure
to press the snap tab to
release the plug before
carefully pulling it out. Do
not force, as this may result
in damaging the lock.

8
INSTALLING THE INTERIORASSEMBLY (F)
Before placing the interior
assembly onto the mount-
ing plate, ensure the
thumb turn is vertical.
Place the interior assembly
against the mounting plate
and make sure the torque
blade is inserted to the thumb
turn shaft.
Secure the interior assembly
to mount platedoor with
2 screws.
I
Torque Blade Thumb turn shaft
Align torque blade with thumb
turn shaft, make sure both are in
the vertical position.
2X
2X
Step 3 continued

PROGRAM RESET
120.0mm
[4 23/32"]
IMPORTANT: if lock is not properly installed it will open and
close repeatedly (refer to #3 below)
3: Once self-check completes ensure the lock operates smoothly by manually locking and
unlocking the door using the thumb turn on the interior assembly. The hook should operate
smoothly without any interference or binding. If necessary, repeat step 2 and ensure that (a) the
hook was extended and (b) the torque blade was inserted vertically while the hook was
extended.
4: Swipe your hand across the touch screen keypad,
the lock should close (lock). If hook bounces
back or unlocks automatically it means something is
not installed correctly. Go back and repeat step 2,
same as above.
5. Once self-check is complete, install the battery
cover (H), secure with screw on top (do not over
tighten).
+
-
+
-
+
-
+
-
RESET
1: With door open and hook fully extended, insert 3
batteries only (hold on inserting the 4th). Note correct
-/+ polarity.
2: Press and HOLD the program button , continue to
hold and install the 4th battery. The lock will
automatically start self-check (release program button
once check starts). The self-check process determines
right or left open door and is very important to ensure
correct installation.
PROGRAM
9
INSTALLING BATTERIES
Step 4
PRESS &
HOLD

L
K(2X) N
L
K(2X) N
Use the supplied door strike or use your existing as long as hook operates smoothly
without binding or catching.
IMPORTANT: because doors and frames vary in design it may be necessary to
make slight adjustments to your strike plate and/or dust box in order to ensure
smooth hook operation. This is very important. If the hook is binding or
catching in any way the lock will sound an alarm (rapid beeping) indicating it
cannot close due to misalignment and/or excessive rubbing or binding.
10
INSTALLATING DOOR STRIKE
Step 5

11
Scan, visit app store, or go to LOCKLY.com/app
Congratulations! You have completed the LOCKLY physical lock installation.
To complete your setup, download the LOCKLY app from the iOS or Google Play
app Store and follow on-screen instructions.
DOWNLOADLOCKLY
®
APP
Step 6

12
PRO
IMPGD778F20200820
We’re here to help!
[e-mail]

13
PRO
For the latest version of this manual, please visit the link below:
http://LOCKLY.com/help

FCC Warning：
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen-
tial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
FCC Radiation Exposure Statement
Vision Connect complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be
installed and operated with minimum distance 20cm between the radiator & your body.
IC WARNING
This device contains license-exempt transmitter(s) that comply with Innovation, Science and Economic Development Cana-
da’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation,
Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.
IC Radiation Exposure Statement
This equipment meets the exemption from the routine evaluation limits in section 2.5 of RSS-102. It should be installed and
operated with a minimum distance of 20cm between the radiator and any part of your body.
Cet équipement est conforme à l'exemption des limites d'évaluation habituelle de la section 2.5 de lanorme RSS-102. Il
doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et toute partie de votre corps.
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California
to cause cancer. For more information go to www.P65Wamings.ca.gov.

IMPGD778F20200820
We’re here to help!
Email: [e-mail]
LOCKLY.com/help
For the most up to date version of this guide please visit:
PRO