MacDon M205 2012 User manual

M205
Self-Propelled Windrowe
r
OPERATOR’S MANUAL
Part #169469 Rev. E
$25

This Manual contains instructions for “SAFETY”, “OPERATION”, and “MAINTENANCE/SERVICE” for your new MacDon
Model M205 Self-Propelled Windrower.
CALIFORNIA
Proposition 65 Warning
Diesel engine exhaust and some of its constituents are known
to the State of California to cause cancer, birth defects, and
other reproductive harm.
Battery posts, terminals and related accessories contain lead
and lead components. Wash hands after handling.

169469/169470/169471 1Revision E
1 INTRODUCTION
This manual contains information on the MacDon Model M205 Self-Propelled Windrower that is designed to cut and
lay in windrows, a wide variety of grain, hay, and specialty crops. Windrowing allows starting the harvest earlier,
protects the crop from wind damage, and gives you more flexibility in scheduling combine time.
The power unit (referred to in this manual as the “windrower”), when coupled with one of the specially designed auger,
rotary, or draper headers, provides a package which incorporates many features and improvements in design. This
manual must be used in conjunction with your header operator's manual.
CAREFULLY READ ALL THE MATERIAL PROVIDED BEFORE ATTEMPTING TO UNLOAD, ASSEMBLE, OR USE
THE MACHINE.
Use this manual as your first source of information about the machine. If you follow the instructions given in this
manual, your M205 windrower will work well for many years. If you require more detailed service information, check
with your Dealer.
Use the Table of Contents and the Index to guide you to specific areas. Study the Table of Contents to familiarize
yourself with how the material is organized.
Keep this manual handy for frequent reference, and to pass on to new Operators or owners. Call your Dealer if you
need assistance, information, or additional copies of this manual. A manual storage case is provided in the cab.
NOTE: The M205 windrower is Dual Direction™, meaning that the windrower can be driven in the cab-forward or the
engine-forward modes. Right-hand and left-hand designations are therefore determined by the Operator’s position,
facing the direction of travel. This manual uses the terms right cab-forward, left cab-forward, right engine-forward, and
left engine-forward when referencing specific locations on the machine.
Published: October, 2012

169469/169470/169471 2Revision E
2 MODEL AND SERIAL NUMBER
Record the model number, serial number, and model year of the header, slow speed transport/stabilizer wheel option
(if installed), and the combine adapter on the lines below:
WINDROWER SERIAL NO.__________________YEAR_____
Serial Number Plate is located on the left cab-forward side of
the main frame near the walking beam.
ENGINE SERIAL NO.______________________YEAR_____
Serial Number Plate is located on the top face of the engine
cylinder head cover.

TABLE OF CONTENTS
169469/169470/169471 3Revision E
Section/Title Page
1INTRODUCTION .............................................................................................................................. 1
2MODEL AND SERIAL NUMBER..................................................................................................... 2
3SAFETY ........................................................................................................................................... 7
3.1SAFETY ALERT SYMBOL ...................................................................................................... 7
3.2SIGNAL WORDS..................................................................................................................... 7
3.3SAFETY SIGNS....................................................................................................................... 7
3.3.1Safety Sign Installation .......................................................................................................................7
3.3.2Safety Sign Locations.........................................................................................................................7
3.3.3Safety Sign Definitions......................................................................................................................12
3.4GENERAL SAFETY............................................................................................................... 17
4PRODUCT DESCRIPTION ............................................................................................................ 19
4.1DEFINITIONS ........................................................................................................................ 19
4.2SPECIFICATIONS................................................................................................................. 20
4.3WINDROWER DIMENSIONS................................................................................................ 22
4.4COMPONENT IDENTIFICATION.......................................................................................... 24
5OPERATOR’S STATION............................................................................................................... 25
5.1OPERATOR CONSOLE........................................................................................................ 25
5.2OPERATOR PRESENCE...................................................................................................... 26
5.2.1Header Drive.....................................................................................................................................26
5.2.2Engine and Transmission .................................................................................................................26
5.3SEAT ADJUSTMENTS.......................................................................................................... 26
5.4TRAINING SEAT ................................................................................................................... 27
5.5SEAT BELTS ......................................................................................................................... 27
5.6STEERING COLUMN ADJUSTMENT .................................................................................. 27
5.7LIGHTS.................................................................................................................................. 28
5.7.1Cab-forward Lighting: Field...............................................................................................................28
5.7.2Engine-forward Lighting: Road .........................................................................................................29
5.7.3Cab-forward Lighting: Road (Optional) .............................................................................................29
5.7.4Beacon Lighting: Export (N.A. Optional)...........................................................................................30
5.7.5HID Lighting (Optional) .....................................................................................................................30
5.8WINDSHIELD WIPERS ......................................................................................................... 31
5.9REAR VIEW MIRRORS......................................................................................................... 31
5.10CAB TEMPERATURE ........................................................................................................... 31
5.10.1Heater Shut-Off Valve.......................................................................................................................31
5.10.2Air Distribution...................................................................................................................................31
5.10.3Controls ............................................................................................................................................32
5.10.4A/C Compressor Protection ..............................................................................................................32
5.11INTERIOR LIGHTS................................................................................................................ 32
5.12OPERATOR AMENITIES ...................................................................................................... 33
5.13Radios.................................................................................................................................... 34
5.13.1AM/FM Radio....................................................................................................................................34
5.13.2Antenna Mounting.............................................................................................................................34
5.14HORN .................................................................................................................................... 34
5.15ENGINE CONTROLS/GAUGES............................................................................................ 35
5.16WINDROWER CONTROLS .................................................................................................. 36
5.17HEADER CONTROLS........................................................................................................... 37
5.17.1Header Engage Switch.....................................................................................................................37

TABLE OF CONTENTS
169469/169470/169471 4Revision E
5.17.2Header Drive Reverse Button ...........................................................................................................37
5.17.3Ground Speed Lever (GSL) Header Switches ..................................................................................38
5.17.4Console Header Switches.................................................................................................................39
5.18CAB DISPLAY MODULE (CDM) ........................................................................................... 41
5.18.1Engine and Windrower Functions .....................................................................................................41
5.18.2Header Functions..............................................................................................................................41
5.18.3Operating Screens............................................................................................................................42
5.18.4Cab Display Module (CDM) Warnings/Alarms ..................................................................................49
5.18.5Cab Display Module (CDM) Programming........................................................................................52
5.18.6Setting Guidelines.............................................................................................................................59
5.18.7Engine Error Codes...........................................................................................................................59
5.18.8Cab Display Module (CDM) and Windrower Control Module (WCM) Fault Codes............................59
6OPERATION .................................................................................................................................. 60
6.1OWNER/OPERATOR RESPONSIBILITIES.......................................................................... 60
6.2SYMBOL DEFINITIONS ........................................................................................................ 60
6.2.1Engine Functions ..............................................................................................................................60
6.2.2Windrower Operating Symbols..........................................................................................................60
6.2.3Header Functions..............................................................................................................................61
6.3WINDROWER OPERATION ................................................................................................. 62
6.3.1Operational Safety ............................................................................................................................62
6.3.2Break-In Period.................................................................................................................................62
6.3.3Pre-Season Check............................................................................................................................63
6.3.4Daily Check.......................................................................................................................................63
6.3.5Engine Operation..............................................................................................................................64
6.3.6Driving The Windrower......................................................................................................................68
6.3.7Adjustable Caster Tread Width .........................................................................................................74
6.3.8Transporting......................................................................................................................................76
6.3.9Storage..............................................................................................................................................86
6.4HEADER OPERATION.......................................................................................................... 87
6.4.1Header Lift Cylinder Stops ................................................................................................................87
6.4.2Header Flotation................................................................................................................................88
6.4.3Levelling............................................................................................................................................91
6.4.4Header Drive.....................................................................................................................................92
6.4.5Header Angle....................................................................................................................................93
6.4.6Cutting Height ...................................................................................................................................95
6.4.7Double Windrowing...........................................................................................................................97
6.4.8Swath Roller Operation.....................................................................................................................97
6.5D SERIES HEADER OPERATION........................................................................................ 98
6.5.1Header Attachment...........................................................................................................................98
6.5.2Header Detachment........................................................................................................................101
6.5.3Header Position...............................................................................................................................103
6.5.4Reel Fore-Aft Position.....................................................................................................................103
6.5.5Reel Height .....................................................................................................................................103
6.5.6Reel Speed .....................................................................................................................................104
6.5.7Draper Speed..................................................................................................................................106
6.5.8Knife Speed.....................................................................................................................................108
6.5.9Deck Shift (Optional).......................................................................................................................109
6.6A SERIES HEADER OPERATION...................................................................................... 110
6.6.1Header Attachment.........................................................................................................................110
6.6.2Header Detachment........................................................................................................................113
6.6.3Auger Speed...................................................................................................................................115
6.6.4Reel Speed .....................................................................................................................................116
6.6.5Knife speed.....................................................................................................................................117
6.7R SERIES HEADER OPERATION...................................................................................... 118
6.7.1Header Attachment.........................................................................................................................118
6.7.2Header Detachment........................................................................................................................121
6.7.3Disc Speed......................................................................................................................................123

TABLE OF CONTENTS
169469/169470/169471 5Revision E
7MAINTENANCE AND SERVICING ............................................................................................. 124
7.1PREPARATION FOR SERVICING ..................................................................................... 124
7.1.1Welding Precautions....................................................................................................................... 124
7.2RECOMMENDED SAFETY PROCEDURES ...................................................................... 124
7.3MAINTENANCE SPECIFICATIONS ................................................................................... 125
7.3.1Recommended Fuel, Fluids And Lubricants ................................................................................... 125
7.3.2Recommended Torques ................................................................................................................. 126
7.3.3Conversion Chart............................................................................................................................ 129
7.4ENGINE COMPARTMENT HOOD...................................................................................... 130
7.5MAINTENANCE PLATFORMS............................................................................................ 131
7.5.1Opening/Closing Platforms ............................................................................................................. 131
7.5.2Opening/Closing Platform for Major Servicing ................................................................................ 131
7.6LUBRICATING THE WINDROWER.................................................................................... 132
7.6.1Lubrication Procedure..................................................................................................................... 132
7.6.2Lubrication Points ........................................................................................................................... 132
7.7OPERATOR’S STATION..................................................................................................... 134
7.7.1Seat Belts ....................................................................................................................................... 134
7.7.2Safety Systems............................................................................................................................... 134
7.7.3Ground Speed Lever (GSL) Adjustments ....................................................................................... 135
7.7.4Steering Adjustments...................................................................................................................... 136
7.7.5Park Brake...................................................................................................................................... 138
7.7.6HVAC System................................................................................................................................. 140
7.8ENGINE ............................................................................................................................... 143
7.8.1General Engine Inspection.............................................................................................................. 143
7.8.2Manually Turning Engine................................................................................................................ 144
7.8.3Oil Level.......................................................................................................................................... 145
7.8.4Changing Oil and Oil Filter.............................................................................................................. 146
7.8.5Air Intake System............................................................................................................................ 147
7.8.6Fuel System.................................................................................................................................... 151
7.8.7Engine Cooling System................................................................................................................... 155
7.8.8Gearbox.......................................................................................................................................... 158
7.8.9Exhaust System.............................................................................................................................. 160
7.8.10Belts................................................................................................................................................ 161
7.8.11Engine Speed ................................................................................................................................. 163
7.9COOLING BOX.................................................................................................................... 164
7.9.1Cooling Box Screen........................................................................................................................ 164
7.9.2Rotor To Screen Clearance............................................................................................................ 165
7.9.3Cooling Box Maintenance............................................................................................................... 166
7.10ELECTRICAL SYSTEM....................................................................................................... 169
7.10.1Battery ............................................................................................................................................ 169
7.10.2Headlights: Engine-forward............................................................................................................ 174
7.10.3Field lights: Cab-forward................................................................................................................ 176
7.10.4Flood Lights - Forward.................................................................................................................... 177
7.10.5Flood Lights - Rear ......................................................................................................................... 178
7.10.6Red and Amber Lights.................................................................................................................... 179
7.10.7Red Tail Lights (If Installed) ............................................................................................................ 179
7.10.8Beacons (If Installed)...................................................................................................................... 180
7.10.9Gauge Light .................................................................................................................................... 182
7.10.10Dome Light ..................................................................................................................................... 182
7.10.11Ambient Light.................................................................................................................................. 182
7.10.12Turn Signal Indicators..................................................................................................................... 182
7.10.13Circuit Breakers and Fuses............................................................................................................. 183
7.11HYDRAULIC SYSTEM ........................................................................................................ 186
7.11.1Oil Level.......................................................................................................................................... 186
7.11.2Hydraulic Oil Cooler........................................................................................................................ 187
7.11.3Changing Hydraulic Oil................................................................................................................... 187

TABLE OF CONTENTS
169469/169470/169471 6Revision E
7.11.4Hydraulic Oil Filters.........................................................................................................................188
7.11.5Header and Reel Hydraulics ...........................................................................................................190
7.11.6Traction Drive Hydraulics................................................................................................................192
7.11.7Hoses and Lines .............................................................................................................................193
7.12WHEELS AND TIRES ......................................................................................................... 194
7.12.1Drive Wheels...................................................................................................................................194
7.12.2Caster Wheels.................................................................................................................................197
7.13MAINTENANCE SCHEDULE .............................................................................................. 201
7.13.1Break-In Inspections .......................................................................................................................201
7.13.2Interval Maintenance.......................................................................................................................202
8TROUBLESHOOTING................................................................................................................. 205
8.1ENGINE ............................................................................................................................... 205
8.2ELECTRICAL....................................................................................................................... 208
8.3HYDRAULICS...................................................................................................................... 208
8.4HEADER DRIVE .................................................................................................................. 209
8.5TRACTION DRIVE .............................................................................................................. 209
8.6STEERING AND GROUND SPEED CONTROL................................................................. 210
8.7CAB AIR............................................................................................................................... 211
8.8OPERATOR’S STATION..................................................................................................... 213
9OPTIONS AND ATTACHMENTS ............................................................................................... 214
9.1AM-FM RADIO..................................................................................................................... 214
9.2AUTO-STEER...................................................................................................................... 214
9.3BOOSTER SPRING KIT...................................................................................................... 214
9.4COMPLETION KIT FOR AUGER and DRAPER HEADER DRIVES .................................. 214
9.5COMPLETION KIT FOR AUGER HEADER DRIVE and CONDITIONER REVERSER ..... 214
9.6COMPLETION KIT FOR DRAPER HEADER REEL DRIVE ............................................... 214
9.7COOLING KITS ................................................................................................................... 214
9.8DOUBLE WINDROW ATTACHMENT................................................................................. 214
9.9FAN AIR BAFFLE KIT ......................................................................................................... 214
9.10HID AUXILLIARY LIGHTING............................................................................................... 214
9.11INTERNAL BOOSTER SPRING KIT ................................................................................... 214
9.12LIGHT HEADER FLOTATION KIT ...................................................................................... 214
9.13LIGHTING AND MARKING KIT FOR CAB-FORWARD ROAD TRAVEL ........................... 214
9.14PRESSURE SENSOR KIT .................................................................................................. 214
9.15QUICK COUPLER KIT ........................................................................................................ 214
9.16REVERSIBLE FAN KIT ....................................................................................................... 214
9.17SWATH ROLLER LIFT/CONTROL ..................................................................................... 215
9.18TOWING HARNESS............................................................................................................ 215
9.19WARNING BEACONS......................................................................................................... 215
9.20WEIGHT BOX...................................................................................................................... 215
9.21WINDSHIELD SHADES ...................................................................................................... 215
INDEX ....................................................................................................................................................216
APPENDIX
CDM/WCM FAULT CODES .............................................................................................................219
ENGINE ERROR CODES.................................................................................................................221

SAFETY
169469/169470/169471 7Revision E
3 SAFETY
3.1 SAFETY ALERT SYMBOL
This safety alert symbol indicates important safety
messages in this manual and on safety signs on
the machine.
This symbol means:
ATTENTION!
BECOME ALERT!
YOUR SAFETY IS INVOLVED!
Carefully read and follow the safety message
accompanying this symbol.
WHY IS SAFETY IMPORTANT TO YOU?
ACCIDENTS DISABLE AND KILL.
ACCIDENTS COST.
ACCIDENTS CAN BE AVOIDED.
3.2 SIGNAL WORDS
Note the use of the signal words DANGER,
WARNING, and CAUTION with safety messages.
The appropriate signal word for each message
has been selected using the following guidelines:
DANGER
Indicates an imminently hazardous situation
that, if not avoided, will result in death or
serious injury.
WARNING
Indicates a potentially hazardous situation
that, if not avoided, could result in death or
serious injury. It is also used to alert against
unsafe practices.
CAUTION
Indicates a potentially hazardous situation
that, if not avoided, may result in minor or
moderate injury. It is also used as a reminder
of good safety practices.
3.3 SAFETY SIGNS
3.3.1 SAFETY SIGN INSTALLATION
Refer to the illustrations on the following pages,
and proceed as follows:
a. Be sure the installation area is clean and dry.
b. Decide on the exact location before you remove
the decal backing paper.
c. Remove the smaller portion of the split backing
paper.
d. Place the sign in position, and slowly peel back
the remaining paper, smoothing the sign as it is
applied.
e. Small air pockets can be smoothed out or pricked
with a pin.
3.3.2 SAFETY SIGN LOCATIONS
The safety signs (decals) appear on the windrower
at the locations approximately as shown in the
pages that follow.
a. Keep safety signs clean and legible at all times.
b. Replace safety signs that are missing or become
illegible.
c. If original parts on which a safety sign was
installed are replaced, be sure the repair part also
bears the current safety sign.
d. Safety signs are available from your Dealer Parts
Department.

SAFETY
169469/169470/169471 8Revision E
Safety Sign Locations (continued)
Safety Sign Locations (LH Side)
A – Hazard Sign MD #135378
B – Cab, Door MD #166454
C – Oil Reservoir under Hood MD #174436
D – Exhaust Cover MD #166450
E – Close to Radiator Cap MD #166461
F – Fan Shroud (Top) MD #166450
G – Fan Shroud (Middle) MD #166451
H – Fan Shroud (Bottom) MD #166452
J – Frame Opening MD #166233
K – Platform (L of Step) MD #166425
L – Platform (R of Step) MD #166441
M – Frame at Valve Block MD #166466
N – Lift Linkage MD #166438
O – Inner Post MD #166457
P – Inner Post MD #166234
Q – Inner Post MD #166463
R – Neutral Interlock MD #166425
S – Frame MD #166425
Safety Sign Locations (cont’d)

SAFETY
169469/169470/169471 9Revision E

SAFETY
169469/169470/169471 10 Revision E
Safety Sign Locations (cont’d)
Safety Sign Locations (RH Side)
A – Hazard Sign on Seat MD #115148
B – Lift Linkage MD #166439
C – Frame MD #166455
D – Frame MD #166456
E – Cab Frame MD #184372
F – Platform MD #166425
G - Shroud MD #166451
H – Shroud MD #166452
J – Hydraulic Reservoir MD #174436
K – Wiper Cover MD #166465

SAFETY
169469/169470/169471 11 Revision E
Safety Sign Locations (cont’d)

SAFETY
169469/169470/169471 12 Revision E
3.3.3 SAFETY SIGN DEFINITIONS
Below are the definitions of each safety sign
(decal) found on the M205 windrower.
1. MD #166233
Run-over hazard.
DANGER
Do not start engine by shorting across starter
or starter relay terminals. Machine will start
with drive engaged and move if starting
circuitry is bypassed.
Start engine only from Operator’s seat. Do not
try to start engine with someone under or near
machine.
2. MD #166234
Run-over hazard
WARNING
The training seat is provided for an
experienced Operator of the machine when a
new Operator is being trained.
The training seat is not intended as a
passenger seat or for use by children.
Use the seatbelt whenever operating the
machine or riding as a trainer.
Keep all other riders off the machine.
3. MD #166425
Run-over hazard.
WARNING
Stop engine, and remove key from ignition
before servicing, adjusting, lubricating,
cleaning, or unplugging the machine.

SAFETY
169469/169470/169471 13 Revision E
4. MD #166438
Crushing hazard
DANGER
Rest header on ground or engage mechanical
locks before going under unit.
5. MD #166439
Crushing hazard
DANGER
Rest header on ground or engage mechanical
locks before going under unit.
6. MD #166441
Loss of control hazard
CAUTION
To prevent machine damage and/or loss of
control, it is essential that the machine be
equipped such that weights are within the
specified limits.
7. MD #166450
Hot surface hazard
WARNING
To avoid injury, keep a safe distance from hot
surface.
8. MD #166451
Rotating fan hazard
WARNING
To avoid injury, stop engine before opening
engine hood.

SAFETY
169469/169470/169471 14 Revision E
9. MD #166452
Pinch point hazard
WARNING
To avoid injury, stop engine before opening
engine hood.
10. MD #166454
General hazard pertaining to machine
operation and servicing.
CAUTION
To avoid injury or death from improper or
unsafe machine operation:
i. Read the Operator’s manual, and
follow all safety instructions. If you do
not have a manual, obtain one from
your Dealer.
ii. Do not allow untrained persons to
operate the machine.
iii. Review safety instructions with all
Operators annually.
iv. Ensure that all safety signs are
installed and legible.
v. Make certain everyone is clear of
machine before starting and during
operation.
vi. Keep riders off the machine.
vii. Keep all shields in place, and stay
clear of moving parts.
viii. Disengage header drive, put
transmission in neutral and wait for all
movement to stop before leaving
Operator’s position.
ix. Shut off engine and remove key from
ignition before servicing, adjusting,
lubricating, cleaning, or unplugging
machine.
x. Engage locks to prevent lowering of
header or reel before servicing in the
raised position.
xi. Use slow moving vehicle emblem and
flashing warning lights when
operating on roadways unless
prohibited by law.
11. MD #166455
Explosion hazard
WARNING
Prevent serious bodily injury caused by:
Explosive battery gases. Keep sparks and
flames away from the battery. Refer to the
Operator’s manual for battery boosting and
charging procedure.
12. MD # 166456
Battery acid hazard
WARNING
Corrosive and poisonous battery acid. Acid
can severely burn your body and clothing.

SAFETY
169469/169470/169471 15 Revision E
13. MD #166457
General hazard pertaining to machine
operation and servicing.
Run-over hazard
CAUTION
To avoid injury or death from improper or
unsafe machine operation:
i. Read the Operator’s manual, and
follow all safety instructions. If you do
not have a manual, obtain one from
your Dealer.
ii. Do not allow untrained persons to
operate the machine.
iii. Review safety instructions with all
Operators annually.
iv. Ensure that all safety signs are
installed and legible.
v. Make certain everyone is clear of
machine before starting engine and
during operation.
vi. Keep riders off the machine.
vii. Keep all shields in place, and stay
clear of moving parts.
viii. Disengage header drive, put
transmission in neutral and wait for all
movement to stop before leaving
Operator’s position.
ix. Shut off engine and remove key from
ignition before servicing, adjusting,
lubricating, cleaning, or unplugging
machine.
x. Engage locks to prevent lowering of
header or reel before servicing in the
raised position.
xi. Use slow moving vehicle emblem and
flashing warning lights when
operating on roadways unless
prohibited by law.
Machine will move if steering wheel is turned
while engine is running.
Steering response is opposite to what is
normally expected when backing up. Turn
bottom of steering wheel in direction you want
to go.
Always move ground speed lever to slow end
of range before shifting high-low speed
control.
Stop engine, and remove key from ignition
before servicing, adjusting, lubricating,
cleaning, or unplugging the machine.
14. MD #166461
Hot fluid under pressure hazard.
CAUTION
Coolant is under pressure and may be hot.
Never remove radiator cap when engine is
hot.

SAFETY
169469/169470/169471 16 Revision E
15. MD #166463
Collision hazard in transport
WARNING
Collision between windrower and other
vehicles may result in injury or death.
When driving windrower on public
roadways:
i. Obey all highway traffic regulations in
your area. Use pilot vehicles front and
rear of windrower if required by law.
ii. Use slow moving vehicle emblem and
flashing warning lights unless
prohibited by law.
iii. If width of attached header impedes
other vehicle traffic, remove header
and install MacDon approved weight
box. Refer to Operator’s manual for
safe procedure to tow header.
16. MD #166465
Loss of control hazard
WARNING
To avoid serious injury or death from loss
of control:
i. Do not make abrupt changes in
steering direction.
ii. Anticipate turns by slowing down well
in advance.
iii. Do not rapidly accelerate or
decelerate while turning.
iv. Limit speed to maximum 20 mph
(32 km/h) when towing a header. To
ensure steering control refer to
Operator’s manual for adding weight
to drive wheels.
v. When traveling on steep slopes:
1) Reduce speed and lower header.
2) Move ground speed lever to slow
end of range.
3) Shift high-low speed control to
low range.
vi. With header removed, steering
control is reduced if weight is not
added to drive wheels. If you must
drive the tractor without header or
MacDon weight system:
1) Operate in low speed range.
2) Avoid slopes.
3) Do not tow a header. IF
CONTROL OF MACHINE IS
LOST, IMMEDIATELY PULL
GROUND SPEED LEVER TO
NEUTRAL.
17. MD #174436
Hydraulic oil pressure hazard.
CAUTION
Do not go near leaks.
High pressure oil easily punctures skin
causing serious injury, gangrene or death.
If injured, seek emergency medical help.
Immediate surgery is required to remove oil.
Do not use finger or skin to check for leaks.

SAFETY
169469/169470/169471 17 Revision E
3.4 GENERAL SAFETY
CAUTION
The following are general farm safety
precautions that should be part of your
operating procedure for all types of machinery.
Protect yourself.
When assembling, operating, and
servicing machinery, wear all the
protective clothing and personal safety
devices that COULD be necessary for the
job at hand. Don’t take chances.
You may need:
oa hard hat
oprotective shoes with slip resistant
soles
oprotective glasses or goggles
oheavy gloves
owet weather gear
orespirator or filter mask
ohearing protection. Be aware that
prolonged exposure to loud noise can
cause impairment or loss of hearing.
Wearing a suitable hearing protective
device such as ear muffs (A) or ear
plugs (B) protects against
objectionable or loud noises
Provide a first-aid kit for use in case of
emergencies.
Keep a fire extinguisher on the machine.
Be sure the extinguisher is properly
maintained and be familiar with its proper
use.
Keep young children away from machinery
at all times.
Be aware that accidents often happen
when the Operator is tired or in a hurry to
get finished. Take the time to consider the
safest way. Never ignore warning signs of
fatigue.
Wear close-fitting
clothing and cover
long hair. Never wear
dangling items such
as scarves or
bracelets.
Keep hands, feet,
clothing and hair
away from moving parts. Never attempt to
clear obstructions or objects from a
machine while the engine is running.
Keep all shields in place. Never alter or
remove safety equipment. Make sure
driveline guards can rotate independently
of the shaft and can telescope freely.
Use only service and repair parts made or
approved by the equipment manufacturer.
Substituted parts may not meet strength,
design, or safety requirements.
(continued next page)
A
B

SAFETY
169469/169470/169471 18 Revision E
Do not modify the machine. Unauthorized
modifications may impair the function
and/or safety and affect machine life.
Stop engine, and remove key from ignition
before leaving Operator’s seat for any
reason. A child or even a pet could engage
an idling machine.
Keep the area used for servicing
machinery clean and dry. Wet or oily floors
are slippery. Wet spots can be dangerous
when working with electrical equipment.
Be sure all electrical outlets and tools are
properly grounded.
Use adequate light for the job at hand.
Keep machinery clean. Straw and chaff on
a hot engine are a fire hazard. Do not allow
oil or grease to accumulate on service
platforms, ladders, or controls. Clean
machines before storage.
Never use gasoline, naphtha, or any
volatile material for cleaning purposes.
These materials may be toxic and/or
flammable.
When storing machinery, cover sharp or
extending components to prevent injury
from accidental contact.