Mitel 5224 User manual

ACD AGENT QUICK REFERENCE GUIDE
M Mitel (design) is a registered trademark of Mitel Networks Corporation. © 2009, Mitel Networks Corporation. All other products and services are the trademarks of their respective holders. All rights reserved.
Mitel
3300 IP Communications Platform
Mitel 5224, 5324 IP Phones
This card describes the basic features available to Agent phones with standard programming.
Your phone may be programmed in a different way. Consult your system administrator if
you need further information.
Supervisor Override
The supervisor can monitor your ACD calls
and join in if necessary. A warning tone
sounds before the override starts, and then
repeats at regular intervals until the
supervisor hangs up.
Getting Help
Use the Request Help? softkey on your
phone to signal your supervisor that you
need help with a threatening or abusive
caller. The supervisor responds by silently
monitoring the conversation, and then
joining in if necessary.
• Press SUPERKEY.
• Press the No softkey repeatedly until
“REQUEST HELP?” appears.
• Press the Ye s softkey
• Enter the supervisor’s Agent ID or
extension number.
• Press the Enter softkey.
For More Information
For additional information on using your
phone, download the user guide from the
Mitel Networks Documentation (eDocs)
website - http://edocs.mitel.com/UG/
index.html
Login/Logout
To log in as a traditional agent:
• Press SUPERKEY. “AGENT
LOGIN?” is displayed.
• Press Yes .
• Dial your Agent ID number and press
Enter.
To log in as a hot desk ACD agent or ACD
Express agent:
• Press HotDesk. “NO USER LOGGED
IN” appears in the display.
• Press Login. “ENTER YOUR EXT#” is
displayed.
• Dial your Agent ID number and press
OK. “ENTER YOUR PIN” appears.
• Enter your PIN and press OK.
To log out:
• Press SUPERKEY.
• Press No repeatedly until AGENT LOG
OUT? appears.
• Press Yes .
Answering Calls
Auto Answer
Auto Answer alerts you to a call by
sounding a brief tone and automatically
connecting you to the caller. To end the call,
press CANCEL.
To enable or disable Auto Answer:
• Press SUPERKEY.
• Press the No softkey repeatedly until
AUTO ANSWER? appears.
• Press the Turn O n or Turn O ff softkey.
Headset Operation
Your administrator may have enabled full-
time headset operation on your phone. Such
phones cannot be operated with a handset.
A headset can be used in regular answer
mode or with Auto Answer.
Handling calls with a headset (no
feature control switch)
To answer a call (Auto Answer off):
• Press the flashing Line key.
To hang up
• Press the Hang Up softkey or
CANCEL.
Handling calls with a headset (with
feature control switch)
To answer a call (Auto Answer off):
• Press the flashing Line key
-Or-
Quickly press and release the Control
Switch.
To mute the headset microphone:
• Press and hold the Control Switch.
To hang up
• Quickly press and release the Control
Switch
-Or-
Press CANCEL.
Enabling or Disabling Headset
Operation (on phones not
programmed for full-time headset
operation)
• Press the HEADSET key
-Or-
Connect or disconnect the headset at the
quick-disconnect plug. (Headset with
feature control switch only.)
Making Calls
Internal Calls
• Dial the number manually
-Or-
Press a Speed Call key.
External Calls
• Dial the outside line access code
(usually “9”).
You hear dial tone.
• Dial the number manually
-Or-
Press a Speed Call key or REDIAL.
After Work Timer
After ending a call, you will be allowed a
certain amount of time to complete the work
generated by the call before another one is
presented.
IMPORTANT! Never leave your phone
unattended while Auto Answer is on.

M Mitel (design) is a registered trademark of Mitel Networks Corporation. © 2009, Mitel Networks Corporation. All other products and services are the trademarks of their respective holders. All rights reserved.
ACD AGENT QUICK REFERENCE GUIDE
You have the option of canceling the timer
and accepting another call before the timer
expires.
To cancel the After Work Timer:
• Press CANCEL.
Note: Making a call or answering another
non-ACD call automatically
cancels the timer. Be prepared to
answer another ACD call when you
hang up.
Make Busy
This feature makes your phone unavailable
for ACD calls without logging out. Use it
for coffee or lunch breaks or if you need
more time to handle paperwork between
calls.
To make your phone busy:
nPress SUPERKEY.
oPress the No softkey repeatedly until
MAKE BUSY? appears.
pPress the Turn On or Tu r n O ff softkey.
Conference
If you need to include your supervisor or
other ACD agent in a three-way call:
nWhile connected to the ACD call, press
TRANS/CONF.
oDial the ACD ID or extension number
of the supervisor or agent.
pWait for an answer.
qPress TRANS/CONF.
To leave a Conference:
• Hang up.
The other parties remain connected.
Transfer
To transfer an active call to your supervisor
or another ACD agent:
nWhile connected to the ACD call, press
TRANS/CONF.
oDial the ACD ID or extension number
of the supervisor or agent.
pDo one of the following:
• To complete the transfer, hang up.
• To announce the transfer, wait for
an answer, consult, and then hang
up.
• To cancel the transfer and reconnect
the ACD call, press CANCEL.
Queue Status
The LED in the Queue Status key and/or ringing patterns indicate the status of your Agent
Group as follows:
Visual Indication Audible Indication Meaning
Off None No calls waiting in queue
On Single ring Calls waiting less than 1st threshold time period
Slow flash None Calls waiting between 1st and 2nd threshold
time period
Fast flash Double ring Calls waiting longer than 2nd threshold period
Pressing the Queue Status key displays
information for your Agent Group from left
to right:
• your Agent number
• number of calls waiting to be answered
• the longest time a call has been waiting
Pressing the NAME softkey (if available)
displays the name of your Agent Group.
To exit, press SUPERKEY.
Hold
You can place your current call on hold
(ACD or non-ACD), and return to it later.
To place a call on hold:
• Press Hold.
The Line key associated with the call
flashes.
To return to a call on hold:
• Press the flashing Line key.