NEC Univerge SV8100 Service manual

C A L L I N G Y O U R M A I L B O X T O C H E C K Y O U R M E S S A G E S
F R OM O U TS I DE
Dial YOUR MAIN NUMBER and press # then your mailbox
number.
C A L L I N G FRO M O U T I D E T O L E A V E A M E S S A G E F O R
A N O T H E R U S E R
Dial YOUR MAIN NUMBER and press *then their mailbox
number.
V e r s i o n 1 . 0
KEYSET
QUICKSTART
REFERENCE
GUIDE
technology
con sulting
TO F OR WA RD YOUR P HONE T O V OIC EMAIL
Select one of the options below:
Forward All Calls:
Dial 741, then 1 to set, then dial VM pilot 3999, hang up.
Forward when busy:
Dial 742, then 1 to set, then dial VM pilot 3999, hang up.
Forward when no answer:
Dial 743, then 1 to set, then dial VM pilot 3999, hang up.
Forward when busy/no answer:
Dial 744, then 1 to set, then dial VM pilot 3999, hang up.
T O T R A N S F E R A C A L L E R T O A U S E R ’S M A I L B O X .
1. While on call, press Transfer.
2. Dial extension number, or press button for person
you wish to transfer caller to.
3. Press the VMsg softkey or dial 8.
4. Hang up.
Unified Communications
NEC SV8100
P.O. Box 576
Tomball, TX 77377-0576
[phone] Phone
[phone] Fax
www.wwtelephoneco.com
STANDARD GUIDE
All manuals and user guides at all-guides.com
all-guides.com

S T I L L H A V I N G T R O U B L E ? V I S I T W W W . W W T E L E P H O N E C O . C O M F O R A F U L L R A N G E O F U S E R G U I D E S .
Look for the blue diamond icon, pictured here, on our website.
M A K I N G A N O U T S I D E C A L L
Lift the Handset or Press Speaker,
Dial 9, then telephone #.
Or
Dial 9 then telephone #.
A N S W E R I N G A C A L L
Lift the Handset.
Or
Press the ANSWER button. If your
phone is not ringing your will need to
press the flashing light for the line
that is ringing, and then lift the
handset.
NEC SV8100 STANDARD REFERENCE GUIDE
S TA ND AR D C O NF IG UR AT I ON G UI DE
Additional voicemail directions on reverse side.
P L A C I N G A C A L L O N H O L D
While the call is active: Press the Hold
button.
R E T R E I V I N G H E L D C A L L S
Lift the Handset then press the desired line
key that is holding a call.
P A R K I N G A C A L L
While on phone with a caller:
1. Press the desired Park Key (1-4)
Or
1. Press the Transfer key.
2. Dial #6 and the Park Location (1-64)
R E T R E I V I N G A P A R K E D C A L L
Press Speaker or lift handset then:
1. Press the desired Park Key (1-4)
Or
1. Dial *6 and the Park Location (1-64)
T R A N S F E R I N G A C A L L
While the call is active:
1. Press the Transfer key.
2. Dial the station number.
3. Announce the call. (Optional)
4. Hang up.
* To transfer straight to a user’s mailbox
dial 8after dialing the extension number of
the person you are transferring to.
P L A C I N G A C O N F E R E N C E C A L L
1. Establish first call.
2. Press the Conf button.
3. Dial the extension/outside number you
would like to add.
4. When called party answers, press the
Conf key twice.
5. Repeat steps 2-4 to add more parties.
A L L - C A L L F O R W A R D C A L L S
1. Press Speaker.
2. Dial 741
3. Press 1
4. Dial Party to be forwarded to. If an
outside line Dial 9 first.
5. Press Speaker.
C A N C E L A L L - C A L L F O R W A R D
1. Press Speaker.
2. Dial 741
3. Press 0
A C T I V A T E / D E A C T I V A T E D O N O T
D I S T U R B
To Activate: Press DND then 3
To Deactivate: Press DND then 0
M A K E A N I N T E R N A L P A G E
1. Lift Handset
2. Select InPg on Display softkey.
3. Dial 1.
T O A C T I V A T E / D E A C T I V A T E Y O U R
M I C R O P H O N E
Press the Mic button.
Tip: If you are on your speaker make sure
your Mic button is lit. When lit this means
the microphone is on.
T O C H E C K Y O U R C A L L E R I D
1. Press the softkey below List in the Display.
2. Press the softkey below CID in the Display.
3. Scroll up and down using the arrow
options in the Display.
T O C A L L T H E V O I C E M A I L
Press the VMsg softkey in the display.
T O T R A N SF E R A C A L L E R T O T H E
V O IC EMA I L B O X OF A N OT HE R U SE R ’s
E X T E N S I O N .
1. While on call, press Transfer.
2. Dial extension number, or press button
for person you wish to transfer caller to.
3. Press 8.
4. Hang up.
All manuals and user guides at all-guides.com