Perma ULTRA User manual

1
2
SET SET
1
OK
2
OK
123
OK
www.permausa.com
Select a suitable lubricant
for perma ULTRA LC
Select discharge period
→e. g. with perma SELECT APP
(refer to our product catalog for details)
Possible remote
mounting position
perma ULTRA - Quick Start Guide
1. Determine installation kit
2. Prepare lube-point
3. Prepare mounting bracket
Clean lube-point Remove grease fi tting Add reducer and hose
4. Activation of lubrication system
Add sealant
2022/01 · Version: 1.2 · en · Art. No. 116686
HINT
perma CONNECT APP
Android 7.0 / iOS 12 (or later)
Kit ULTRA Heavy Duty
65mm beam clamp
(900522)
Kit ULTRA Heavy Duty
cage hanger
(900523)
Kit ULTRA Heavy Duty
rail mount
(900524)
ULTRA Drive kit
(116159)
ULTRA LC
For extreme operating conditions:
Protection cap ULTRA Heavy Duty
→ perma ULTRA can be remote mounted only!
Set unit of time (m, w) by
pressing the SET button:
1x = m (months)
2x = w (weeks)
Set the
discharge period
Place cover over LC and
turn until it catches
Place LC on center of drive
and adjust it with front lug until it
catches; system automatically
recognizes LC size
HINT
Use perma CONNECT APP
for applying settings
Insert the battery pack
into the drive and click it into
place; remove plug from
drive and dispose of it
Remove transport
protection and plug
and dispose of it
Ensure that grease
completely fi lls the LC
outlet; There must be no
air pocket in the LC

Feature Description
Low battery
indicator
If the battery set which has been inserted is damaged,
faulty or fl at “Lo” will be registered on the LCD. The red
LED will double fl ash. The batteries cannot be used.
A new set of batteries is required for each new lubricator
cartridge in order to ensure optimal lubricator
performance.
Purge
Access the purge feature by holding down the SET button
for 10 seconds. Release the button when “PU” appears
and the purge will start automatically and show the “PU”
LCD display. The green LED and backlit LCD will fl ash.
The purge cycle runs for 3 complete discharges to deliver
6 cc of grease. It can be stopped at any time by pushing
the SET button once.
LED Light & LCD
Screen combinations
LED’s positioned at
2 locations of the
sides of the drive,
colored red and green.
Normal operation:
- Green LED fl ashes every 8 seconds
- LCD screen displays time & volume
Run cycle (lubricant being delivered):
- Green LED and backlit LCD fl ashes every second
- LCD screen displays “ru”
Empty Lubricant Cartridge (LC):
- Red LED double fl ashes every 3 seconds
- LCD screen displays “LC”
Blockage / Back Pressure Overload (OL):
- Red LED double fl ashes every 8 seconds
- LCD screen displays “OL”
Purge (PU):
- Green LED and backlit LCD fl ashes every second
- LCD screen displays “PU”
Quick Reference
Battery usage
Standard applications
-20 °C to + 60 °C
-4 °F to +140 °F
Use Refi ll kit Standard (alkaline)
Low temperature
applications
-40 °C to + 60 °C
-40 °F to +140 °F
Use Refi ll kit low temperature (lithium)
RUN