Polycom SoundPoint IP 331 User manual

www.i-evolve.com/voip
Polycom Soundpoint IP 330/331/335 Phone
Quick Reference Guide

Page 2
Table of Contents
Phone Overview.......................................................................................................................
Soft Key Features....................................................................................................................
How to Place a Call.................................................................................................................
Placing a Call from a Call List .................................................................................................
Ending a Call ...........................................................................................................................
How to Put a Call on Hold ......................................................................................................
Transferring Calls.....................................................................................................................
Call Waiting .............................................................................................................................
Moving Between Active Calls .................................................................................................
Set Up a Conference in an Active Call ....................................................................................
3 Way Conference Call on Outbound Calls ............................................................................
How to Park a Call...................................................................................................................
Pick Up a Parked Call .............................................................................................................
Voicemail .................................................................................................................................
Feature Codes ..........................................................................................................................
3
4
5
6
6
7
8
9
9
10
10
11
11
12
13

Page 3
Polycom SoundPoint IP 331 Phone - Overview
ABC
21
DEF
3
54
MNO
JKL
GHI
6
TUV
8
WXYZ
9
OPER
PQRS
0
7
Hold
Line2
Line1Dial
Menu
1
4
GHI
PQRS
ABC
2
5
JKL
TUV
8
OPER
0
DEF
3
MNO
6
WXYZ
9
7
Hold
Line1
Dial
Menu
Messges
Iluminated Display
Display Changes for Options
Soft Key Controls
Message Light
Default Display Screen Shows Date, Time & Extension
Line 1 Key
Messages Key
Enter Selection Key
Scroll Buttons
Menu Key
Hold Key
Speaker Phone
Dial Key
Volume Control
Mute
Handset
Headset Key
Headset Plug In Side of Phone
NewCall
Mon, Jul 6
641 1
10:12A
Callers Dir

Page 4
Soft Key Features
Features from the Main Display
New Call Press this to place a new call.
Msgs Press this to access voicemail directly.
Callers Press this to access received callers.
Dir Press this to access the Contact Directory
Features While On a Call
Trans Press this to transfer a call to a telephone number
Conf Press this when creating a 3 way call
Features when a call is on Hold
Resume Press this to resume the call you placed on hold
Join Press this to join a call on hold to an active call
Park Press this to park a call on a line to be picked up from another phone

Page 5
How to Place a Call
You can place a call using the handset, headset, or
speakerphone by pressing one of the following buttons:
•Dial
•Line 1
•New Call Soft Key
•Headset
•Speaker
You can also dial the number rst, and then choose the
method you will use to speak to the other party.
During a call, you can alternate between Handset,
Headset, or Hands-Free Speakerphone modes by
pressing the Speaker or Headset buttons, or picking up
the Handset.
Phone with Default Screen
Display changes to this screen once
phone receiver is picked up and you
startdialing your number.
How to Place a Call
1
Enter number:
7165058324
>>

Page 6
Placing Calls from a Call List
To Place a Call From a Call List
Use the Up, Right, and Down Arrow keys to scroll through the list to
•Up shows your speed dial list
•Right shows your placed calls
•Down shows your received calls
When the party you wish to contact is highlighted in black press Dial or
pick up the handset.
Ending a Call
Do one of the following steps:
•Press the End Call soft key
•Replace the handset to the cradle
•Press the Speaker key if in speakerphone mode
•Press the Headset key if in headset mode
Received Calls
7165891234
1
FRANK SMITH
2
Note: When scrolling through your Received Calls using the up and down
arrows, calls that were picked up show a phone receiver icon next
to the phone number. Calls that were not picked up show an icon of
an entire phone beside the number.
Speed Dial
Placed Calls
Received Calls
EndCall
To:7165891234
Trans More
1
0.15

Page 7
How to Put a Call on Hold
Call Hold and Resume
During a call, press the Hold button
1. Press Hold button or Resume soft key to resume the call
When a call has been on hold for an extended period of time, both visual and
audible alerts appear. Contact your system administrator to determine if this
feature is enabled/disabled, what the time period is, and wha
are available. When active on a call, at a volume
that is typically lower than the normal ringer volume.
Note As using the Hold feature typically generates music or a beeping tone,
avoid putting a conference call on hold.
Multiple Calls on Hold
If multiple calls are on hold, use the Up and Down Arrow keys to switch
between the calls, then press the Resume soft key to retrieve the desired call.
If two or more calls are on hold, an indication appears on the graphic display,
for example “3/4”, indicating that this is the third call out of four calls.
How to Put a Call on Hold and Multiple Calls on Hold
Dial Line 1
Messages
Menu
NewCall
Mon, Jul 6
641
10:12A
Callers Dir
12 3
4 5 6
7 8 9
*0#
ABC DEF
GHI
PQRS TUVW XYZ
OPER
JKL MNO
-+
Hold
NewCall
3:18p
To:5195891234
Resume
0.15
Press Hold key to put
call on hold. Press
Resume soft key or
Hold key again to
resume call.
When call is on hold
the receiver points
upward.
6:18p
Hold: Jack White 5196751
Resume
New Call Join
3.27
34

Page 8
Transferring Calls
How to Transfer a Call
Transfer - Allo , prior to completing the
call transfer. The end party will see the caller ID of the person transferring the call.
Blind Transfer - The call is transferred directly to the end party. The end party will see
the caller ID of the original caller.
Transferring calls to a Telephone Number (“Trans”)
The “Trans” function allows you to transfer calls to an external telephone number by-
following these steps:
1.
2.
Press the Trans soft key
3.
Choose Normal or Blind
Enter the telephone number of the end party. Once the display returns to the
main screen your call has been transferred and you can place the handset back on
the cradle.
Dial Line 1
Messages
Menu
NewCall
Mon, Jul 6
641 1
10:12
A
Callers Dir
12 3
4 5 6
7 8 9
*0#
ABC DEF
GHI
PQRS TUV WXYZ
OPER
JKL MNO
-
+
Hold
EndCall
3:18p
To:7165891234
Trans Conf
1
0.15

Page 9
Call Waiting
Moving Between Active Calls
The screen currently shows 2 active calls as indicated
in the top left box in the display.
Using the Down Arrow key will show call on hold.
Call on Hold
Press Resume, other call is placed on hold.
Press Join and Conference this call in with
New Call
When you receive a call when already on a call you
have 3 options:
Ignore
Ignores the incoming call. The display screen will
clear and the ring will be muted. The call is routed
ation. ie Call goes
to voicemail after 4 rings
Answer
Places your active call on hold to answer the new
incoming call
Reject
Sends the incoming call to voicemail immediately
Incoming Call Screen when user is on an Active Call
Moving Between Active Calls
Ingore
Call From
John Smith
Answer More
EndCall
4:04p
From:Kevin Kelly 5708793
Trans More
2.29
12
New Call
4:05p
From:Heidi Fischer 5058324
Resume Join
2.29
22

Page 10
Set Up Conference in an Active Call | 3 Way Conference Call on Outbound Calls | Conference Bridge
To Set Up a Conference in an Active Call Using the Join Soft Key:
When you are in an active call:
1. If you have one call on hold and answer a new call, use the down arrow to go to the call on hold, then press the Join soft key.
A conference is created with the active call, the call on hold, and yourself.
2. If you have more than one call on hold, use the up and down arrow keys to switch to the desired call on hold, press the Join
soft key. A conference is created with active call, the call on hold and yourself.
3. As above if you are on an active call and receive a new call, you can use join from call waiting.
How to do a 3 way Conference Call on Outbound Calls
You can create a conference with other parties using the phone’s conference feature.
To set up a conference:
1. y.
2. Press the More Conf soft key.
3. Press the Conf soft key to create a new call. The active call is placed on hold.
4. Call the second party.
5. When the second party answers, press the Conf soft key again to join all parties in the conference.
To split a conference call:
Press the Split soft key to split the conference. Both parties will be on hold.
To end a conference call:
Press the End Call soft key or hang up. The other parties will continue to be connected.