Protech Systems MP-4815 User manual

Ver. Q1
All Rights Reserved. Copyright 2017
Packing Checklist
Specifications System View
MP-4815 MP-4815
MP-4815
REAR I/O
Front View
Quarter View
477.55 477.55
60
50
227.14
365.23
2nd Display
PA-6225
Side View
VGA
USB 2.0
Type-B
DC IN
2nd Display
Display 15-inch LCD panel
Resolution LVDS 1024x768 dots XGA (24-bit)
Brightness Typ. 300 cd/ m2
Backlight Lamp Life time: min. 50,000 hours
Touch Panel P-CAP touch (Bezel free) or Resistive Touch
Touch Control Board Only for 15-inch Resistive Touch Panel (USB Interface)
Speaker 3W+3W@4 ohm speaker
Power Supply DC12V/3.33A/ 40W Power Adapter, 90 ~240 Vac, 50/60Hz
Wall Mount VESA Mount 100x100 mm
Dimension (WxHxD) 367 x 300 x 38 mm
Weight MP-4815: 3.1 kg
MP-4815 2nd Display + PA-6225: 12.6 kg
Certificate CE
Rear I/O Ports
DC IN 1 x DC-IN port
USB 1 x USB 2.0 port, Type B (downstream)
VGA 1 x VGA port
Optional Integrated Moudule
Module Mounting Provides mounting holes on right side to fix other devices
Optional Integrated Devices
Camera Camera module (USB Interface)
Environment
Operating Temp. 0°C ~ 40°C (32°F ~ 104°F)
Storage Temp. -20°C ~ 60°C (-4°F ~ 140°F)
Humidity 10% ~ 90%
If you discover any item below are damaged or
lost, please contact your vendor immediately.
MP-4815 x1
This Quick Reference Guide x1
Manual DVD x1
MP-4815 EPE Right x1
MP-4815 EPE Left x1
MP-4815
Quick
Reference
Guide
Designed for PA-6225
Unit: mm

Jumper Setting
All Rights Reserved. Copyright 2017
Safety Precaution
MP-4815
The following messages are safety reminders on how to protect your system
from damages, and thus extend the life cycle of the system.
1. Check the Line Voltage
The operating voltage for the power supply should cover the range of
9V~36V DC; otherwise, the system may be damaged.
2. Environmental Conditions
Place your MP-4815 on a sturdy, level surface. Be sure to allow
enough room on each side to have easy access.
Avoid moving the system rapidly from a hot place to a cold place or
vice versa because condensation may come from inside of the system.
Place MP-4815 against strong vibrations, which may cause hard disk
failure.
3. Handling
Do not turn the system upside down. This may cause the hard drive to
malfunction.
Do not allow foreign objects to fall into this product.
If water or other liquid spills into this product, unplug the power cord
immediately.
4. Good Care
When the outside of the case is stained, remove the stain with neutral
washing agent with a dry cloth.
If dust has been accumulated on the outside, remove it by using a
vacuum cleaner specially made for computers.
CAUTION!
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the manufacturer. Dispose of used batteries
accordingto the manufacturer’s instructions.
WARNING!
Some internal parts of the system may have high electrical voltage. Therefore we
strongly recommend qualified engineers open and disassemble the system.
CAUTION! Danger of explosion may occur if the battery is replaced incorrectly. Replace batteries only with the same or equivalent
type recommended by the manufacturer. Dispose the used batteries according to the manufacturer’s instructions.
15” 2nd Display
1
CN10
CN5
CN7 CN8
CN11
CN12
CN3
1
1
11
1
5H4
36
3
20
19
1
2
CN2
CN4
1
2
J2
J1
5V
3.3V
1
1
PWM
LEVEL
6
1
CN1
H1
CN9
J4
DC1
1
2
H2
12
351
P1
H3
J3
1
2
5
6
7
8
9
10
3
4
2
4
6
8
10
J3
Panel Type Setting
1
3
5
7
9
J1
J2
J3
J4
J5
35
JP5
JP4
JP3
JP2
JP1
1
J1
Backlight Adjustment
Mode Selection
1
J2
Panel Power Supply
Selection

Ver. Q1
All Rights Reserved. Copyright 2017
Packing Checklist
Specifications System View
MP-4815 MP-4815
MP-4815
REAR I/O
Front View
Quarter View
Side View
459.93
227.14
366.12
60
50
2nd Display
PA-6322
VGA
USB 2.0
Type-B
DC IN
2nd Display
Display 15-inch LCD panel
Resolution LVDS 1024x768 dots XGA (24-bit)
Brightness Typ. 300 cd/ m2
Backlight Lamp Life time: min. 50,000 hours
Touch Panel P-CAP touch (Bezel free) or Resistive Touch
Touch Control Board Only for 15-inch Resistive Touch Panel (USB Interface)
Speaker 3W+3W@4 ohm speaker
Power Supply DC12V/3.33A/ 40W Power Adapter, 90 ~240 Vac, 50/60Hz
Wall Mount VESA Mount 100x100 mm
Dimension (WxHxD) 367 x 300 x 38 mm
Weight MP-4815: 3.1 kg
Certificate CE
Rear I/O Ports
DC IN 1 x DC-IN port
USB 1 x USB 2.0 port, Type B (downstream)
VGA 1 x VGA port
Optional Integrated Moudule
Module Mounting Provides mounting holes on right side to fix other devices
Optional Integrated Devices
Camera Camera module (USB Interface)
Environment
Operating Temp. 0°C ~ 40°C (32°F ~ 104°F)
Storage Temp. -20°C ~ 60°C (-4°F ~ 140°F)
Humidity 10% ~ 90%
MP-4815
Quick
Reference
Guide
Designed for PA-6322
If you discover any item below are damaged or
lost, please contact your vendor immediately.
MP-4815 x1
This Quick Reference Guide x1
Manual DVD x1
MP-4815 EPE Right x1
MP-4815 EPE Left x1
MP-4815 2nd Display + PA-6322: 11 kg

Jumper Setting
All Rights Reserved. Copyright 2017
Safety Precaution
MP-4815
The following messages are safety reminders on how to protect your system
from damages, and thus extend the life cycle of the system.
1. Check the Line Voltage
The operating voltage for the power supply should cover the range of
9V~36V DC; otherwise, the system may be damaged.
2. Environmental Conditions
Place your MP-4815 on a sturdy, level surface. Be sure to allow
enough room on each side to have easy access.
Avoid moving the system rapidly from a hot place to a cold place or
vice versa because condensation may come from inside of the system.
Place MP-4815 against strong vibrations, which may cause hard disk
failure.
3. Handling
Do not turn the system upside down. This may cause the hard drive
to malfunciton.
Do not allow foreign objects to fall into this product.
If water or other liquid spills into this product, unplug the power cord
immediately.
4. Good Care
When the outside of the case is stained, remove the stain with neutral
washing agent with a dry cloth.
If dust has been accumulated on the outside, remove it by using a
vacuum cleaner specially made for computers.
CAUTION!
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the manufacturer. Dispose of used batteries
accordingto the manufacturer’s instructions.
WARNING!
Some internal parts of the system may have high electrical voltage. Therefore we
strongly recommend qualified engineers open and disassemble the system.
CAUTION! Danger of explosion may occur if the battery is replaced incorrectly. Replace batteries only with the same or equivalent
type recommended by the manufacturer. Dispose the used batteries according to the manufacturer’s instructions.
15” 2nd Display
1
CN10
CN5
CN7 CN8
CN11
CN12
CN3
1
1
11
1
5H4
36
3
20
19
1
2
CN2
CN4
1
2
J2
J1
5V
3.3V
1
1
PWM
LEVEL
6
1
CN1
H1
CN9
J4
DC1
1
2
H2
12
351
P1
H3
J3
1
2
5
6
7
8
9
10
3
4
2
4
6
8
10
J3
Panel Type Setting
1
3
5
7
9
J1
J2
J3
J4
J5
35
JP5
JP4
JP3
JP2
JP1
1
J1
Backlight Adjustment
Mode Selection
1
J2
Panel Power Supply
Selection

Ver. Q1
All Rights Reserved. Copyright 2017
Packing Checklist
Specifications System View
MP-4815 MP-4815
MP-4815
REAR I/O
Front View
Quarter View
463
Unit: mm
Side View
463
50
227.14
2nd Display
PA-6722
60
372.66
VGA
USB 2.0
Type-B
DC IN
2nd Display
Display 15-inch LCD panel
Resolution LVDS 1024x768 dots XGA (24-bit)
Brightness Typ. 300 cd/ m2
Backlight Lamp Life time: min. 50,000 hours
Touch Panel P-CAP touch (Bezel free) or Resistive Touch
Touch Control Board Only for 15-inch Resistive Touch Panel (USB Interface)
Speaker 3W+3W@4 ohm speaker
Power Supply DC12V/3.33A/ 40W Power Adapter, 90 ~240 Vac, 50/60Hz
Wall Mount VESA Mount 100x100 mm
Dimension (WxHxD) 367 x 300 x 38 mm
Weight MP-4815: 3.1 kg
Certificate CE
Rear I/O Ports
DC IN 1 x DC-IN port
USB 1 x USB 2.0 port, Type B (downstream)
VGA 1 x VGA port
Optional Integrated Moudule
Module Mounting Provides mounting holes on right side to fix other devices
Optional Integrated Devices
Camera Camera module (USB Interface)
Environment
Operating Temp. 0°C ~ 40°C (32°F ~ 104°F)
Storage Temp. -20°C ~ 60°C (-4°F ~ 140°F)
Humidity 10% ~ 90%
MP-4815
Quick
Reference
Guide
Designed for PA-6722
If you discover any item below are damaged or
lost, please contact your vendor immediately.
MP-4815 x1
This Quick Reference Guide x1
Manual DVD x1
MP-4815 EPE Right x1
MP-4815 EPE Left x1
MP-4815 2nd Display + PA-6722: 11 kg

Jumper Setting
All Rights Reserved. Copyright 2017
Safety Precaution
MP-4815
The following messages are safety reminders on how to protect your system
from damages, and thus extend the life cycle of the system.
1. Check the Line Voltage
The operating voltage for the power supply should cover the range of
9V~36V DC; otherwise, the system may be damaged.
2. Environmental Conditions
Place your MP-4815 on a sturdy, level surface. Be sure to allow
enough room on each side to have easy access.
Avoid moving the system rapidly from a hot place to a cold place or
vice versa because condensation may come from inside of the system.
Place MP-4815 against strong vibrations, which may cause hard disk
failure.
3. Handling
Do not turn the system upside down. This may cause the hard drive
to malfunction.
Do not allow foreign objects to fall into this product.
If water or other liquid spills into this product, unplug the power cord
immediately.
4. Good Care
When the outside of the case is stained, remove the stain with neutral
washing agent with a dry cloth.
If dust has been accumulated on the outside, remove it by using a
vacuum cleaner specially made for computers.
CAUTION!
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the manufacturer. Dispose of used batteries
accordingto the manufacturer’s instructions.
WARNING!
Some internal parts of the system may have high electrical voltage. Therefore we
strongly recommend qualified engineers open and disassemble the system.
CAUTION! Danger of explosion may occur if the battery is replaced incorrectly. Replace batteries only with the same or equivalent
type recommended by the manufacturer. Dispose the used batteries according to the manufacturer’s instructions.
15” 2nd Display
1
CN10
CN5
CN7 CN8
CN11
CN12
CN3
1
1
11
1
5H4
36
3
20
19
1
2
CN2
CN4
1
2
J2
J1
5V
3.3V
1
1
PWM
LEVEL
6
1
CN1
H1
CN9
J4
DC1
1
2
H2
12
351
P1
H3
J3
1
2
5
6
7
8
9
10
3
4
2
4
6
8
10
J3
Panel Type Setting
1
3
5
7
9
J1
J2
J3
J4
J5
35
JP5
JP4
JP3
JP2
JP1
1
J1
Backlight Adjustment
Mode Selection
1
J2
Panel Power Supply
Selection

Ver. Q1
All Rights Reserved. Copyright 2017
Packing Checklist
Specifications System View
MP-4815 MP-4815
MP-4815
REAR I/O
Front View
Quarter View
468.1
Unit: mm
Side View
376.9
50
227.14
2nd Display
PA-6980
60
468.1
VGA
USB 2.0
Type-B
DC IN
2nd Display
Display 15-inch LCD panel
Resolution LVDS 1024x768 dots XGA (24-bit)
Brightness Typ. 300 cd/ m2
Backlight Lamp Life time: min. 50,000 hours
Touch Panel P-CAP touch (Bezel free) or Resistive Touch
Touch Control Board Only for 15-inch Resistive Touch Panel (USB Interface)
Speaker 3W+3W@4 ohm speaker
Power Supply DC12V/3.33A/ 40W Power Adapter, 90 ~240 Vac, 50/60Hz
Wall Mount VESA Mount 100x100 mm
Dimension (WxHxD) 367 x 300 x 38 mm
Weight MP-4815: 3.1 kg
MP-4815 2nd Display + PA-6980: 13 kg
Certificate CE
Rear I/O Ports
DC IN 1 x DC-IN port
USB 1 x USB 2.0 port, Type B (downstream)
VGA 1 x VGA port
Optional Integrated Moudule
Module Mounting Provides mounting holes on right side to fix other devices
Optional Integrated Devices
Camera Camera module (USB Interface)
Environment
Operating Temp. 0°C ~ 40°C (32°F ~ 104°F)
Storage Temp. -20°C ~ 60°C (-4°F ~ 140°F)
Humidity 10% ~ 90%
If you discover any item below are damaged or
lost, please contact your vendor immediately.
MP-4815 x1
This Quick Reference Guide x1
Manual DVD x1
MP-4815 EPE Right x1
MP-4815 EPE Left x1
MP-4815
Quick
Reference
Guide
Designed for PA-6980

Jumper Setting
All Rights Reserved. Copyright 2017
Safety Precaution
MP-4815
The following messages are safety reminders on how to protect your system
from damages, and thus extend the life cycle of the system.
1. Check the Line Voltage
The operating voltage for the power supply should cover the range of
9V~36V DC; otherwise, the system may be damaged.
2. Environmental Conditions
Place your MP-4815 on a sturdy, level surface. Be sure to allow
enough room on each side to have easy access.
Avoid moving the system rapidly from a hot place to a cold place or
vice versa because condensation may come from inside of the system.
Place MP-4815 against strong vibrations, which may cause hard disk
failure.
3. Handling
Do not turn the system upside down. This may cause the hard drive
to malfunction.
Do not allow foreign objects to fall into this product.
If water or other liquid spills into this product, unplug the power cord
immediately.
4. Good Care
When the outside of the case is stained, remove the stain with neutral
washing agent with a dry cloth.
If dust has been accumulated on the outside, remove it by using a
vacuum cleaner specially made for computers.
CAUTION!
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the manufacturer. Dispose of used batteries
accordingto the manufacturer’s instructions.
WARNING!
Some internal parts of the system may have high electrical voltage. Therefore we
strongly recommend qualified engineers open and disassemble the system.
CAUTION! Danger of explosion may occur if the battery is replaced incorrectly. Replace batteries only with the same or equivalent
type recommended by the manufacturer. Dispose the used batteries according to the manufacturer’s instructions.
15” 2nd Display
1
CN10
CN5
CN7 CN8
CN11
CN12
CN3
1
1
11
1
5H4
36
3
20
19
1
2
CN2
CN4
1
2
J2
J1
5V
3.3V
1
1
PWM
LEVEL
6
1
CN1
H1
CN9
J4
DC1
1
2
H2
12
351
P1
H3
J3
1
2
5
6
7
8
9
10
3
4
2
4
6
8
10
J3
Panel Type Setting
1
3
5
7
9
J1
J2
J3
J4
J5
35
JP5
JP4
JP3
JP2
JP1
1
J1
Backlight Adjustment
Mode Selection
1
J2
Panel Power Supply
Selection