Qlight S80AR User manual

1
S80AR/ S80AU
• Protection rating : IP44
• Ambient operating temperature : -20°C to +50°C
Ordering Specications
Bulb Revolving Warning Light
Thank you for purchasing Qlight’s products. Please read this user manual carefully
prior to installation and operation to ensure safe and correct use.
Precautions for Safety
Failure to follow the instructions below may cause a loss of life or serious physical injury.
1. Please remove any objects that can interrupt ventilation around the product.
2. Please turn o󰀨 the power of the product immediately if it fails to operate properly.
3. Carefully wire the product according to each product’s specication.
4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
5. Do not apply excessive force/impact to the product.
6. Failure to follow any of the instructions above may cause malfunction or damage to the product, re, and electric shock.
Precautions for Correct Use
Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the
product that would void the warranty.
1. During wiring or maintenance, please completely turn o󰀨 the power of the product. (Failure to follow this may lead to an electric shock.)
2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection
ratings indicated for each product. (Failure to follow these instructions may cause a re to the product, electric shock, physical injury,
malfunction or damage to the product.)
3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to
follow these instructions may lead to re, electric shock, or product damage.)
4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to re, electric shock, or product damage.)
5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to
follow this may cause damage to property, re, electric shock and loss of life.)
Product Specications
S80AU - BZ - 220 - R
[Model
number]
[Buzzer] [Voltage] [Color]
| | | |
• S80AR
• S80AU
• (Blank)
- No buzzer type
• BZ
- Built-in buzzer
type
• 12 - DC12V
• 24 - DC24V
• 110 -AC110V
• 220 -AC220V
R-Red
A-Amber
G-Green
B-Blue
Model
number
Voltage Current
Bulb specications
Certicate Weight Color
Volts/
Watts
Conguration Part#
S80AR
S80AU
DC12V 0.484A 12V5W T16x35 15S 5
-
0.31kg
R-Red
A-Amber
G-Green
B-Blue
DC24V 0.310A 12V5W T16x35 15S 6
AC110V 0.080A 12V5W T16x35 15S 5
0.50kg
AC220V 0.040A 12V5W T16x35 15S 5
Please scan the QR code for more
detailed product information.
www.qlight.com
44
90dB
5020

S80AU
84
127
72
113
43
50
60
88
105
82
43
125
72
113
105
50
60
88
S80AR
Ø8 CABLE ENTRY
Ø83 Ø83
4-Ø4 HOLES
Ø8 CABLE ENTRY
4-Ø4 HOLES
+
-
2
Parts Denition
Dimensions
(Units : mm)
Wiring Instructions
• External power line - UL1015 AWG18(0.75sq) × 2C 400mm
• For built-in buzzer type, there is a shared supply line for the buzzer and lighting element.
Red
Black
White
Black
Power Power
Fuse Fuse
DC AC
Lens(AS)
Light bulb
Housing(ABS)
Reector
(Heat resistant ABS)
S80AR S80AU

4-Ø5 HOLES
Min.Ø5 CABLE ENTRY
50
60
ⴙ
ⴘ
ⴚ
3
• Machine holes on the mounting surface referring to the diagram below.
S80AR/ S80AU
Installation
Mounting Hole Specications
• Please mount xing board① to the mounting surface using bolts. Then, connect the power line of terminal box.
• Hook the rear of the mounting bracket of the product to the upper xing board②, then push the body against the xing board.
• After tightly attaching the product body to the mounting bracket, tighten the bolt at the bottom of the mounting bracket③.
Installation Environment and Protection Rating
• This product is designed for use with protection rating of IP44.
• If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating
indicated(IP44), it may cause malfunction or damage to the product.
• In case of outdoor applications, install the product in the upright position. Do not install the product horizontal or upside-
down positions where water can potentially penetrate into the product and impact it’s operation.
• For further information, please visit our website (www.qlight.com).

Qlight Co., Ltd. www.qlight.com | [email protected]
Head O󰀩ce | Suite #1510, STX-V Tower, 128 Gasan digital 1-ro, Geumcheon-gu, Seoul, Korea
Tel. [phone](Toll free. [phone]) Fax. [phone]
Factory | 185-25, Mukbang-ro, Sangdong-myeon, Gimhae-si, Gyeongsangnamdo, Korea Tel. [phone](Toll free. [phone])
Qlight OverSEAs Sales Dept | 704 Nakdong-daero, Sasang-gu, Busan, Korea(Eomgung-Dong) Tel : [phone]
Qlight Public Relations & Marketing Team O󰀩ce | 704 Nakdong-daero, Sasang-gu, Busan, Korea(Eomgung-Dong) Tel. [phone]
Qlight USA, Inc. www.qlight.com www.qlightusa.com | [email protected]
3003 North First Street, Suite #341, San Jose, CA 95134 USA Tel. +1 - 408 - 519 - 5740 Fax. +1 - 408 - 519 - 5739
SHANGHAI Qlight Electronic Co., Ltd. www.qlight.com www.qlightcn.com | [email protected]
China Factory/ Shanghai Sales O󰀩ce | #19, Nanda Road, Baoshan Area, Shanghai, China Tel. +86 - 21 - 6651 - 7100 Fax. +86 - 21 - 6315 - 3929
China Factory Site 2 (Qidong) | #33, Haiyan Road, Qidong High-tech Industrial Development Zone, Qidong, Jiangsu Province, China
Tel +86 - 513 - 8384 - 9999 Fax +86 - 513 - 8384 - 9910
Product Operation Inquiry / Customer Support [phone]
You can expect prompt service if you have exact information such as model name, symptom, telephone number and address.
※ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Head office : Suite #1510, STX-V Tower, 128 Gasan digital 1-ro, Geumcheon-gu, Seoul, Korea (Postal Code : 08507)
Factory : 185-25, Mukbang-Ro, Sangdong-Myeon, Gimhae-Si, Gyeongsangnam-Do, Korea (Postal Code : 50805)
For your safety
Specication and dimensions listed in this catalogue subject to change without notice for product quality improvement.
The newest product information is available on our website.(www.qlight.com)
Please read the instruction manual attached to the product carefully before installation and use.
www.qlight.com
EN - S80AR - 2106A