SICK MPS-G50 Series User manual

OPERATING INSTRUCTIONS
MPS-G with 2/3 switching points and IO-Link (up
to 8 switching points) and diagnostic function
Magnetic cylinder sensors

Described product
MPS-G
Manufacturer
SICK AG
Erwin-Sick-Str. 1
79183 Waldkirch
Germany
Legal information
This work is protected by copyright. Any rights derived from the copyright shall be
reserved for SICK AG. Reproduction of this document or parts of this document is
only permissible within the limits of the legal determination of Copyright Law. Any modi‐
fication, abridgment or translation of this document is prohibited without the express
written permission of SICK AG.
The trademarks stated in this document are the property of their respective owner.
© SICK AG. All rights reserved.
Original document
This document is an original document of SICK AG.
2O P E R A T I N G I N S T R U C T I O N S | MPS-G with 2/3 switching points and IO-Link (up to 8 switching points) and diagnos‐
tic function
8028199.1IG9/2023-01-12 | SICK
Subject to change without notice

Contents
1 About this document........................................................................ 5
1.1 Further information................................................................................... 5
1.2 Symbols and document conventions...................................................... 5
2 Safety information............................................................................ 6
2.1 Intended use............................................................................................. 6
2.2 Improper use............................................................................................. 6
2.3 Limitation of liability................................................................................. 6
2.4 Requirements for skilled persons and operating personnel.................. 6
2.5 Hazard warnings and operational safety................................................. 7
2.6 Notes on UL approval............................................................................... 7
3 Product description........................................................................... 8
3.1 Product ID.................................................................................................. 8
3.1.1 Device view............................................................................... 8
3.2 Product characteristics............................................................................ 8
3.2.1 Product features...................................................................... 8
3.3 Operating principle................................................................................... 10
3.3.1 Principle of operation.............................................................. 10
3.3.2 Detection range....................................................................... 10
3.3.3 Position output......................................................................... 11
3.3.4 Switching behavior after Manual Teach of up to 3 switching
points........................................................................................ 11
3.3.5 Switching behavior after Dynamic Teach of 2 switching
points........................................................................................ 12
3.3.6 Switching behavior after Dynamic Teach of 3 switching
points........................................................................................ 15
4 Transport and storage....................................................................... 20
4.1 Transport................................................................................................... 20
4.2 Transport inspection................................................................................. 20
4.3 Storage...................................................................................................... 20
5 Mounting............................................................................................. 21
5.1 Mounting requirements............................................................................ 21
5.2 Optional accessories................................................................................ 21
5.3 Mounting................................................................................................... 21
6 Electrical installation........................................................................ 22
6.1 Safety......................................................................................................... 22
6.1.1 Notes on electrical installation............................................... 22
6.1.2 Wiring instructions................................................................... 22
6.2 Connections.............................................................................................. 24
6.2.1 Pin assignment/Connection diagram + wire colors.............. 24
6.3 Connecting the supply voltage................................................................. 24
CONTENTS
8028199.1IG9/2023-01-12 | SICK O P E R A T I N G I N S T R U C T I O N S | MPS-G with 2/3 switching points and IO-Link (up to 8 switching points) and diagnos‐
tic function 3
Subject to change without notice

7 Commissioning.................................................................................. 26
7.1 Overview of commissioning steps........................................................... 26
7.2 Positioning on drive.................................................................................. 26
7.3 Put the sensor into operation for the first time...................................... 26
8 Operation............................................................................................ 28
8.1 General notes on operation..................................................................... 28
8.2 Operating and status indicators.............................................................. 28
8.2.1 Control element....................................................................... 28
8.2.2 Status indicators...................................................................... 28
8.3 Teach-in mode........................................................................................... 29
8.3.1 Dynamic Teach-in..................................................................... 30
8.3.2 Manual teach-in....................................................................... 32
8.4 Operation via IO-Link................................................................................ 36
8.4.1 Process data structure............................................................ 36
8.4.2 General functions.................................................................... 37
8.4.3 Configuration options via IO-Link............................................ 37
8.4.4 Actuator diagnostic functions................................................. 46
8.4.5 Process diagnostic functions.................................................. 48
9 Troubleshooting................................................................................. 55
10 Maintenance...................................................................................... 56
11 Decommissioning............................................................................. 57
11.1 Replace device.......................................................................................... 57
11.2 Disassembly and disposal....................................................................... 57
11.3 Returning devices..................................................................................... 57
12 Technical data.................................................................................... 58
12.1 Dimensional drawing................................................................................ 59
13 Glossary.............................................................................................. 61
14 Annex.................................................................................................. 63
14.1 Teach routine at a glance......................................................................... 63
14.2 Conformities and certificates................................................................... 64
CONTENTS
4O P E R A T I N G I N S T R U C T I O N S | MPS-G with 2/3 switching points and IO-Link (up to 8 switching points) and diagnos‐
tic function
8028199.1IG9/2023-01-12 | SICK
Subject to change without notice

1 About this document
1.1 Further information
You can find the product page with further information under the SICK Product ID at:
pid.sick.com/{P/N}.
P/N corresponds to the part number of the product.
The following information is available depending on the product:
•Data sheets
•These publication in all available languages
•CAD files and dimensional drawings
•Certificates (e.g., declaration of conformity)
•Other publications
•Software
•Accessories
1.2 Symbols and document conventions
Warnings and other notes
DANGER
Indicates a situation presenting imminent danger, which will lead to death or serious
injuries if not prevented.
WARNING
Indicates a situation presenting possible danger, which may lead to death or serious
injuries if not prevented.
CAUTION
Indicates a situation presenting possible danger, which may lead to moderate or minor
injuries if not prevented.
NOTICE
Indicates a situation presenting possible danger, which may lead to property damage if
not prevented.
NOTE
Highlights useful tips and recommendations as well as information for efficient and
trouble-free operation.
Instructions to action
bThe arrow denotes instructions to action.
1. The sequence of instructions is numbered.
2. Follow the order in which the numbered instructions are given.
✓The tick denotes the results of an action.
ABOUT THIS DOCUMENT 1
8028199.1IG9/2023-01-12 | SICK O P E R A T I N G I N S T R U C T I O N S | MPS-G with 2/3 switching points and IO-Link (up to 8 switching points) and diagnos‐
tic function 5
Subject to change without notice