Steelcase Migration SE Boundary Screen User manual

Migration SE™Boundary Screen
888.STEELCASE (888.783.3522)
www.steelcase.com
©2020 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
®
Page 1 of 5
149905 Rev A
T30
#2 SQUARE
5/32”

®
Page 2 of 5
149905 Rev A
Dual Sided
For Dual-sided Benches
1) Assemble the mounting bracket using (3) M6
buttonhead thread forming screws (provided).
Attach the mounting bracket to underside of the cross-tube
weldment.
TIP: Bracket is centered on dual sided applications
2a) Use a level to check the vertical orientation. 2b) Loosen
(6) buttonhead screws using a 5/32" allen wrench, 2c) Adjust
the interface bracket to vertical and
2d) Retighten (6) buttonhead screws.
2c
2a
2d
2b
5/32”
.472"
(12mm)
3x
1

®
Page 3 of 5
149905 Rev A
For Single-sided Benches:
3)
Tip: Locate the center slot of the bracket to the M6
threaded hole closest to the column. When located
correctly there will be 3 unused M6 tapped holes
near the closed end of the cross tube
(see Single Sided Bottom View).
4) Repeat steps 2a thru 2d from previous page.
3
Single Sided
Single Sided Bottom View

®
Page 4 of 5
149905 Rev A
1” minimum
5c 5b 5a
CAUTION: Failure to observe this procedure could
result in injury. Boundary screen is heavy & must be
held in place firmly until attachment is complete to
prevent the screen from falling.
Attach the Boundary Screen
Note: If not installed, install screen leveler glides prior to step 4.
5a) Position boundary screen against bracket and check for
alignment of the pilot holes (6X), 5b) Adjust the screen leveler glides,
if necessary, to match the pilot hole pattern to slots in bracket, 5c)
Secure using (6X) #10-12 x .625 screws (provided).
TIP: Check screen for 1” minimum gap clearance and alignment to
work surface top. If necessary, loosen screws from Step 1, make
adjustment to screen position, then retighten screws securely.

®
Page 5 of 5
149905 Rev A
Install Trim
6a) Flex sides of trim cover open to overlap mounting bracket.
6b) engage “V-tabs” to slots, then 5c) push cover tight to
boundary screen.
6a 6b 6c