Steelcase Avenir PAB-4 Joining Panel User manual

If you have a problem, question,
or request, call your local dealer,
or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people
who want to help you.
(Outside the U.S.A., Canada,
Mexico, Puerto Rico, and the
U.S. Virgin Islands, call:
1.616.247.2500)
Or visit our website
www.steelcase.com
Si vous avez un problème, question,
ou la demande, appellent votre
revendeur local, ou
Ligne 1 de Steelcase à
888.STEELCASE (888,783,3522)
pour l'action immédiate par les
personnes qui veulent vous aider.
(en dehors des Etats-Unis, Canada,
Le Mexique, Porto Rico, et
Les ÉTATS-UNIS. Les Îles Vierges,
appel: 1,616,247,2500)
Ou visiter notre website
www.steelcase.com
Si usted tiene un problema, pregunta,
o la petición, llama a su distribuidor
local, o Línea 1 de Steelcase en
888.STEELCASE (888,783,3522)
para la acción inmediata por la
gente que desea ayudarle.
(fuera de los E.E.U.U., Canadá,
Méjico, Puerto Rico, y Los E.E.U.U..
Islas de la Virgen, llamada:
1,616,247,2500)
O visite nuestro website
www.steelcase.com
©1998 Steelcase Inc.
Rapids Grand, MI 49501
U.S.A.
Les ETATS-UNIS.
Los E.E.U.U.
Printed in U.S.A.
Imprimé aux Etats-Unis.
Impreso en los E.E.U.U. 939500723 Rev A
1
of
4
Avenir
PAB-4 Joining Panels Of The Same Height
(One panel to the join seam of two panels, either side)
®
3/16” WRENCH
ADDED PANELS
ADDED PANELS
JOIN SEAM
3/8” SOCKET

2
of
4
939500723 Rev B
For standard and power panels
1. Remove the top cap by gripping at one end and
lifting straight up.
For power panels only
1a. Remove tape and slide end cap down into
place.
NOTE: Care should be taken not to scratch or mar
painted parts.
2. When installing a new panel to the join seam of
previously installed panels you must first remove
connecting plates and bolts.
1.
2.
TOP CAP
1a.
END CAP
TAPE
CONNECTING PLATE
BOLT
CONNECTING PLATE
BOLT

3
of
4
939500723 Rev A
3.
5.
4.
PANEL “B”
PANEL “A”
PIN
BOLT
MOUNTING PLATE
PREVIOUSLY
INSTALLED
PANELS NEW PANEL
PINS
MOUNTING
PLATE
PREVIOUSLY
INSTALLED
PANELS BOLT
NEW PANEL
MOUNTING
PLATE
6.

4
of
4
939500723 Rev A
7. When replacing top cap, press top cap reveal
sides inward at one end and slide top cap down
over reveal sides along entire length.
NOTE: Top cap must line up with panel uprights.
NOTE: Glides may be adjusted to level panels by
turning to the right or left.
PANEL UPRIGHT
TOP CAP REVEAL
TOP CAP