Steelcase TouchDown2 User manual

© 2022
Rev. A MAY 22
TouchDown2
EN Quick Guide
3
DE Kurzanleitung 17
FR Guide succinct 33
ES Guía rápida 49
RU Краткая инструкция
65
160858

Table of contents
1 About this product 4
1.1 Intended use 4
1.1.1 Foreseeable misuse 4
2 Product description 6
2.1 Technical data 6
2.2 Components 6
2.3 Overview 7
3 Transport and assembly 9
3.1 Safety instructions 9
3.2 Checking the delivery contents 10
3.3 Assembly 10
4 Operating and adjusting 11
4.1 Safety instructions 11
4.2 Operation 11
5 Maintenance 13
5.1 Function check 13
5.2 Cleaning and care 13
6 Disposal 14
7 Service 15
3
EN

1 About this product
1 About this product
The TouchDown2 office furniture product line by Steelcase is
subject to continuous quality control during manufacture and
distribution. This ensures fault-free functionality.
TouchDown2 is GS-qualified.
The type plate of the gas-spring supported height
adjustment element is located under the desktop.
1.1 Intended use
The TouchDown2 desk is designed exclusively for use as
office furniture. Any other use, or use beyond the specified
intended use is considered improper use.
Intended use also includes compliance with all
instructions in the quick guide!
1.1.1 Foreseeable misuse
Improper use of the product can result in danger to life and
limb as well as property damage. For this reason, improper use
is prohibited. In the event of improper use, Steelcase assumes
no liability for any damage that could occur and does not
guarantee that the components will function properly.
Possible improper use includes:
■Lifting loads.
■Use as a climbing aid.
■Use for permanent storage of objects with a total
weight exceeding 75 kg.
4
EN

1 About this product
■Outdoor use.
■Use in damp rooms.
This list does not claim to be exhaustive.
5
EN

2 Product description
2 Product description
The TouchDown2 office furniture program by Steelcase
consists of the following products:
■Desk without height adjustment
■Desk with gas-spring supported height adjustment
Dimensions and weight specifications of your product are
provided on the delivery note.
2.1 Technical data
TouchDown2
Dimensions and weight see delivery
note
Temperature range at the site of use +5°C to +35°C
Relative humidity (non-condensing) 5% to 80%
Maximum load capacity
30 kg, see
sticker and type
plate
Maximum adjustment range:
Single telescope 680 mm to 1120
mm
Type plates are on the underside of the desktop and on the lift
column.
2.2 Components
The TouchDown2 desk essentially consists of the following
components:
■Desktop
−Wood 25 mm or
−TechTop
6
EN

2 Product description
■Support plate, steel 3 mm
■Telescopic column, steel
–Outer tube Ø 70 x 4 mm
–Inner tube Ø 50 x 3 mm
■Adjustment screw PA6 Ø 65 mm, lockable
■Slider
■Height adjustment manual: telescope
All available components are specified in the separate
technical description and in the price list.
For detailed product information and for additional orders and
subsequent deliveries, please contact our Customer Service
Department (see Service on page15).
2.3 Overview
The figure shows one of several design variants of the
TouchDown2 desk. It serves merely as an illustration of the
desk components.
Adjustment of the desk height is described under
Operating and adjusting on page11!
Touchdown2, variants rigid 730 mm and rigid 1050 mm
7
EN

2 Product description
1Desktop (available in different sizes)
2Column
3Rigid legs
4Adjustment screw for height compensation
5Castors
8
EN

3 Transport and assembly
3 Transport and assembly
3.1 Safety instructions
DANGER
Danger of crushing or shearing injuries
through improper operation of the height
adjustment element!
During manual height adjustment body parts or objects can be
crushed or sheared off.
}Maintain an adequate lateral distance (at least 25 mm
for distances that remain unchanged, at least 500
mm for obstructions that cannot be seen) to all sur-
rounding objects, walls, etc.
}Set up the desk such that adequate free space is
ensured for the entire travel length of lift movements
and for maintenance.
WARNING
Injuries or damage possible due to fracture
of the fastening bolts!
When lifting on the desktop or the attached components, the
fastening bolts could tear out.
}When transporting or moving the desk, only grasp it
via the column.
9
EN

3 Transport and assembly
CAUTION
"Minor injuries or damage can occur due to
tilting!
"When moving with open desktop, minor injuries or damage
can occur due to tilting."
}Watch out for stumbling hazards, thresholds and nar-
row passages .
3.2 Checking the delivery contents
After unpacking, check the product immediately for damage
sustained during transport and for completeness; inform the
manufacturer of any damage as soon as possible.
3.3 Assembly
Please follow the provided assembly instructions to assemble
the TouchDown2 desk.
Steelcase recommends having the authorised dealer
or an assembly company assemble the desk.
10
EN