Steelcase Specific Solution for Answer Curved Corner... User manual

Page 1 of 6
939504848 Rev B
Specific Solution for Answer®Curved Corner Worksurface
Mounted on Pathways®Supports
®
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
©2001 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
#3 ACR3
Phillips Driver
#3 Square Drive Bit
Bit Holder

Page 2 to 6
939504848 Rev B
Worksurface Supports-Parts List
A
Screw "A"
#3 Square Drive
#12 Self-Drilling
For Wood-Core Worksurface
B
Screw "B"
1/4-20 Self-Tapping
For Metal Parts
#3 Square Drive
DFixed-Height Support Bracket
for C-Legs,
FFixed-Height Support
Bracket for Rear Supports
Stretcher - P/N J355533SR
(must order separately).
2 required per corner unit.
GMounting Plate
for Intermediate Supports
'C' Leg
Intermediate Support
Rear Support
(must order separately).
1 required per corner unit.
E
Intermediate Support Bracket
for Intermediate Supports
C
Screw "C"
10-10 X 1 Pan Head
Tapping for Wood
HWorksurface Mounting Plate

Page 3 to 6
939504848 Rev B
Review Complete Leg and Stretcher Assembly
Drawing on page 5 to Determine Left or Right
Hand Bracket Mounting for 'C' Legs and
Intermediate Supports.
Connect (1) plate 'G' and (1) bracket
'E' to each Intermediate Support with (7)
screws 'B'.
E
G
B
B
E
G
B
B
Intermediate Support - RHIntermediate Support - LH

Page 4 to 6
939504848 Rev B
D
B
H
B
'C' Leg - RH
D
B
H
'C' Leg - LH
B
F
Rear Support
B
Review Complete Leg and Stretcher Assembly
Drawing on page 5 to Determine Left or Right
Hand Bracket Mounting for 'C' Legs and
Intermediate Supports.
Connect (1) bracket 'D' and (1) plate 'H'
to each 'C' Leg with 4 screws 'B'.
Connect (2) brackets 'F' to Rear Support
with (4) screws 'B'.

Page 5 to 6
939504848 Rev B
Using Type 'B' screws (28), secure stretchers to
brackets/supports and legs. Insert screws from
inner face of brackets: D, E and F. Align with
corresponding holes at each end of stretcher.
(gray holes shown in bracket drawing represent
correct bracket/stretcher connection pattern).
D
D
E
E
FF
Screw 'B'
Rear Support
Stretcher
P/N J355533SR
Intermediate SupportIntermediate Support
'C' Leg 'C' Leg

Page 6 to 6
939504848 Rev B
Lower Corner Worksurface onto assembled support assembly. Align pre-drilled holes in
surface underside with bracket hole configuration. Fasten worksurface to Mounting Plates 'G'
with (5) 'C' screws each. Attach surface to brackets 'F' with (1) 'A' screw each. Use (1)
Type 'A' screw for inner flange of each bracket 'E'.
Position straight surface on support assembly. Align surfaces end to
end, flush at front and rear edges. Hold in position and secure to
bracket 'E' and plate 'H' with 1 screw 'A' each. Secure surface to
brackets 'D' with (2) 'A' screws each.
Screw 'C' (5) Places
Mounting Plate
Screw 'C' (5) Places
Mounting Plate
Straight Surface
Mounting Plate 'G'
Corner Worksurface
Support Assembly