Victory 4x4 UNIVERSAL Configuration guide

UNIVERSAL
ADVENTURE CARRIER
LADDER
Thank you for purchasing from Victory 4x4! Checkout our website, victory4x4.com for other great o-road
products. Be sure to rate and review our product online. If you have any questions or are missing parts, please
don’t hesitate to call us at 269-459-8447!
INSTALL INSTRUCTIONS
Please read the mounting instructions below carefully before attempting to install.
Be sure to check out the install video on the product page, if available.

INCLUDED HARDWARE
4x
3/8”-16 X 3/4”
Button Head
4x 3/8”-16
Serr. Flange Nut

INCLUDED PARTS
1x 1x

1
INSTALLATION
Start by mounting the ladder to the outside edge of the le carrier. Simply
insert the 3/8”-16 serr. flange nuts into the cutouts in the inside of the
adventure carrier and hold them over the holes on the inside of the carrier
and thread the 3/8”-16 X 3/4” button head bolts through the holes in the
right side of the ladder and the le side of the carrier and into the nuts.

INSTALLATION
2To finish the assembly, bolt the bottom step into the holes in the arm of
the carrier, underneath the ladder using the 3/8”-16 X 3/4” button head
bolts on the outside and of the carrier and the 3/8”-16 serr. flange nuts on
the inside.