Victory 4x4 VBR-HR User manual

TACOMA, TUNDRA & COLORADO
BED RACK HEADACHE RACK
Thank you for purchasing from Victory 4x4! Checkout our website, victory4x4.com for other great o-road
products. Be sure to rate and review our product online. If you have any questions or are missing parts, please
don’t hesitate to call us at 269-459-8447!
INSTALL INSTRUCTIONS
Please read the mounting instructions below carefully before attempting to install.
Be sure to check out the install video on the product page, if available.

INCLUDED HARDWARE
5/16”-18 Serr.
Flange Nut
14x
5/16”-18 Stainless
Button Head
14x
4x
4x
M6 Steel Serr
Flange Nut
M6 x 25mm
Button Head
4x
18-8 x 1/4”
Flat Washer
INCLUDED BOLT PACK(S) 045-0118
Note: Some Victory 4x4/JCR Oroad/SquatchProof products share hardware kits. Any extra hardware you may
recieve that is not listed above can be reurposed or discarded.

INCLUDED PARTS
2x
1x
Panel Pieces
Connector Bracket

1. Start by taking the (2) provided panel pieces and assembling them
together using the connector bracket and the supplied M6 button heads,
washers and flange nuts. Assemble together as shown in the orientation
below.
INSTALLATION

INSTALLATION
2. With the (2) panels assembled together as one, take (10) of the provided
5/16” button heads and flange nuts and secure the panel assembly to
the back of your Bed Rack, as shown in the orientation below, with the
connector bracket bolts facing the cab (viewed from the cab side of the
rack).

3. With your panel secure to your Bed Rack, make sure all of your hardware
is tight to complete your install. And that’s it! You’re now equipped with
a sturdy mounting location for your desired fast-access gear. Please visit
us at www.victory4x4.com for other made-in-the-US armor and storage
options.
INSTALLATION