Victory 4x4 3RD GEN TACOMA DOUBLE CAB ROOF RACK Configuration guide

3RD GEN TACOMA
FRONT DOOR
MOLLE PANEL
Thank you for purchasing from Victory 4x4! Checkout our website, victory4x4.com for other great o-road
products. Be sure to rate and review our product online. If you have any questions or are missing parts, please
don’t hesitate to call us at 269-459-8447!
INSTALL INSTRUCTIONS
Please read the mounting instructions below carefully before attempting to install.
Be sure to check out the install video on the product page, if available.

INCLUDED HARDWARE
8x 8x
.257” ID X .500 “ OD X.375”
Nylon Spacer 8-15 X 3/4” PAN PHIL
Button Head

INCLUDED PARTS
2x

1To begin installing the MOLLE Panel, place the panel against the door in
the open space under the armrest and behind the cupholder, Then, adjust
the position until it is where you want it. We prefer it lined up so there is
an even amount of space at the front and back as well as at the top and
bottom. Once it is in position, make a mark on the door at each hole. Then,
make an indent or small pilot hole at each mark. It only needs to be enough
to get the provided screws started.
INSTALLATION
2With the holes started, set the panel into place and install it using the
provided screws with the spacers between the panel and the door.