Yealink SIP-T58V User manual

CONTROL VIDEO DURING A CALL
Change the video view
Tap to display the video on full screen.
Tap to display video in the call control panel.
Turn video view on/off during a call
Swipe down from the top of the screen to open the
control center. Tap Video to toggle video from
phone camera on/off.
HOLD AND RESUME CALLS
Place a call on hold
Press the Hold button or soft key during an
active call. The line soft key controlling the call will
indicate the is on hold.
Resume a held call
Press the line soft key controlling the call or the
Resume soft key.
VOICEMAIL
Set up voicemail
If voicemail is available for your extension, the system will walk you through
your voicemail setup the first time you press the button.
Check voicemail from your phone
Once you have set up your voicemail, press the 
button and follow the prompts.
Yealink SIP-T58V Quick Reference Guide
For full user guides and video tutorials, visit help.ena.com and select ENA SmartVoice
NAVIGATE THE TOUCH SCREEN
Swipe left or right to switch between home and widget screens. Swipe down
from the top of the screen to open the control and notification center.
Tap to go back to previous screen.
Tap to return to the home screen.
Tap to view and manage recently used applications.
PLACE VOICE/VIDEO CALLS
Using the handset
Dial the number you are calling, then pick up the handset.
Note: You may place a call by picking up the handset
before dialing. Just be aware the system will attempt to
complete the call after a slight pause in entering digits
on the dialpad.
Using the speakerphone
With the handset in the cradle, dial the
number you are calling, then press 
or the Send soft key.
ANSWER CALLS
Using the handset
When a call comes in, pick up the handset.
Using the speakerphone
When a call comes in, press or the Answer soft key.
Answer a second call
When a second call comes in, press the Answer soft key or the ringing line
soft key. The active call is automatically placed on hold.

TRANSFER CALLS
Blind transfer
Press the button or Trans fer soft key during an active call. The call is
automatically placed on hold.
Enter the number to which you want to transfer the call.
To complete the transfer either hang up, or press the button, or press
the Transfer soft key twice.
Consultative transfer
Press the button or Trans fer soft key during an active
call. The call is automatically placed on hold.
Place a call to the transfer recipient by entering their
number then waiting for the call to complete or pressing
the Transfer soft key followed by Send.
When the transfer recipient answers, if they
are available to take the call, press the
button or Trans fer soft key to complete
the transfer.
Direct to voicemail transfer
Press the button or Trans fer
soft key during an active call. The call
is automatically placed on hold.
If you are transferring to a four-digit extension, enter *90 followed by the
number to which you want to transfer the call.
If you are transferring to a five-digit or six-digit extension, enter * followed by
the number to which you want to transfer the call.
To complete the transfer either hang up, or press the button, or press the
Tra ns fer soft key twice.
Return to the original caller
At any point before completing a transfer, you may take the original caller
off hold by tapping the line soft key controlling the held call or tapping the
held call window and tapping Resume.
MAKE A 3-PARTY CONFERENCE CALL
Tap the Conference soft key during an active
call. The active call is automatically placed on
hold.
Enter the number of the party you would like to
conference in, then tap Conference or wait for
the call to complete.
When the third party answers, press the
Conference soft key again. All parties are now
joined in the conference.
Press the Split soft key to split the conference call
into two individual calls.
Press the EndCall soft key to disconnect all
parties.
MUTE AND UNMUTE MICROPHONE
Press to mute the microphone during a call.
Press again to unmute the microphone during a call.
Yealink SIP-T58V Quick Reference Guide
For full user guides and video tutorials, visit help.ena.com and select ENA SmartVoice