Yealink MeetingBar A20 User manual

Yealink MeetingBar A20 Kit
English | 󳼢󱌬󱈆󲤿| Deutsch | Français | Español
Quick Start Guide (V1.0)
Microsoft
Teams
Certied for
Microsoft
Teams
Certied for

Table of Contents
English..............................................................1
󳼢󱌬󱈆󲤿 ...................................................................... 9
Deutsch.............................................................17
Français...........................................................25
Español...........................................................33

1
Package Contents
MeetingBar A20
VCR11 AAA Battery×2
3 m Ethernet Cable 1.8 m HDMI Cable×2
(for the display device)
Cable Tie×5 Power Adapter
×4
×2
×2
Mounting Bracket and
Accessories Silicone Pad×2 Quick Start Guide
CTP18 7.5 m Ethernet Cable Mounting Bracket Screwdriver
and Accessories
Remote Control Package Touch Panel Package
(Standard accessory on Zoom edition)
• Standard accessories
• Optional accessories



2
2
2
Cable Lock Box PoE Adapter
PSE Ethernet Cable
(3 m CAT5E FTP cable) Power Cord
EN
Cable lock box 3M Velcro
TV-Clip Mount
(for installing)
VCH51 Interface 7.5 m
Protective Cover Ethernet Cable
VCH51 Sharing Kit
WPP20 Type-C Adapter
Wireless Presentation Pod-WPP20
0.6 m 0.6 m
HDMI Cable USB Type-C Cable
WPP30
Wireless Presentation Pod-WPP30

2
睞睞睥NN
34
5
Endpoint embedded installation
is prohibited (For example: inside
the wall, enclosed space).
Endpoint Installation
• Mount on a Wall
Step1: Determine A20 position
TV
10 cm
TV
H>120 cm
H<120 cm
Step2: Assemble the mounting bracket
Hole depth: 6 mm
T4×30 screws
Step3: Mount the A20 to the wall
Use the bracket to mount your endpoint on a wall.
Hole diameter: 30 mm
The mounting height affects your camera view. The recommended
height is 1.1 m above the ground.
Unboxing Video
󶏢Teams󶏣
Unboxing Video
󶏢Zoom󶏣

3
睞睞睥NN
34
5
Pay attention to the
direction of M-2
• Using TV-Clip Mount
睠
57
睞
睡
睢
睟
Velcro A is posted on the
inside of M-2 by default

4
TV
TV TV
• Put on a desk
• Put on a TV stand cart platform
15°
15°
Adjusting the Camera Tilt
Silicone Pad

5
Reset
MAC
SN
12
2
1
CTP18 Connection
3 m Ethernet Cable 7.5 m Ethernet Cable
Endpoint Connection
Display
(Not included)
Power Adapter
1.8 m HDMI Cable 3 m Ethernet Cable
PoE
If you only need to use one display, please connect to HDMI 1 port.
Make sure that CTP18 and the
MeetingBar A20 are in the same
LAN.
MeetingBar A20 (Endpoint)
The functions of the
VC Hub/Phone port
and the Internet
port are different,
pay attention to the
connection method.
CTP18

6
Pair with the CTP18 (Optional)
For a better pairing experience, we recommend starting the A20 endpoint rst and then the CTP18.
If you purchased a combination kit, MeetingBar A20 and CTP18 would be paired automatically. You
can go to step 2 directly.
Find a networked computer and operate it
according to the interface prompts of CTP18 and
MeetingBar A20.
1. Pair manually: On the CTP18, enter the IP address of the MeetingBar A20 on display.
2. Initialize language, time zone, and auto update, and select the desired platform. If you
select Device Mode, refer to the Device Mode section.
3. Account login (Contact the corresponding service provider to obtain an account)
MeetingBar A20
CTP18
Zoom: Follow the prompts on CTP18 to sign in account.
Method 1: Sign in on the website Method 2: Sign in on the device
Use the remote control to operate it if your display
does not support touching.
Teams:
Sign in the same Microsoft Teams account on both CTP18 and MeetingBar A20.
Select the desired endpoint on the CTP18.
Enter the pairing code displayed on the endpoint on CTP18 and complete pairing.
CTP18 Pairing Video
(Teams)
CTP18 Pairing Video
(Zoom)

7
Wireless Content Sharing/Wireless Device-USB Mode
Wireless Content Sharing
1. Connect the WPP20/WPP30 to the USB-A port of the
MeetingBar A20. Waiting for 3 seconds, MeetingBar A20
prompts “Wireless presentation pod pairing successfully”.
2. Connect the WPP20/WPP30 to the PC and press the
Presentation button to share the screen. Wireless Presentation
Pod
WPP20/WPP30 cannot be used when the endpoint uses a wireless network.
PC
Wireless Device-USB Mode
1. Connect the WPP30 to the USB-A port of the Meeting-
Bar A20. Waiting for 3 seconds, MeetingBar A20 prompts
“Wireless presentation pod pairing successfully”.
2. Connect the WPP20/WPP30 to the PC.
3. On the Yealink Wireless Presentation Pod software, click
BYOD Mode > Press to Share.
Presentation button
Wireless Content
Sharing Video
(Teams)
Wireless Device
USB Mode Video
(Teams)
Wired Content
Sharing Video
(Teams)
Wired Content
Sharing Video
(Zoom)
Wireless Device
USB Mode Video
(Zoom)
Wireless Content
Sharing Video
(Zoom)
Wired Content Sharing/Wired Device-USB Mode
Wired Content Sharing
2
1
Ethernet Cable
USB-C Cable with Adapter
PC
USB-C
HDMI
HDMI Cable
Connect VCH51 and MeetingBar A20 with an Ethernet Cable, and connect VCH51 and PC
with a USB-C Cable or HDMI Cable.
• Share screen after the HDMI cable is connected.
• The CTP18 paired with the MeetingBar A20 will prompt whether to enter the BYOD mode,
and click Cancel to share screen after the USB-C Cable is connected.
OR
HDMI
VC Hub/
Phone
PoE
VCH51
USB-C
Device Mode
Device Mode
Video
1. Do one of the following to select Device Mode:
• When selecting a platform during power-on initialization, select Device Mode.
• Switch platforms after logging in:
Teams: Go to More > Settings > Device Settings > UC Provider, enter the admin password
(0000), and select Device Mode.
Zoom: Go to Settings > General >System Settings > UC Provider, enter the admin password
(0000), and select Device Mode.
2. Refer to steps 1 and 2 of Wireless Device-USB Mode or Wired Device-USB Mode to enter
Device Mode.