Zummo Z40 Technical specifications

MAINTENANCE INSTRUCTIONS
We advise using protective gloves to handle our juicers.
Cleaning the juice extraction system and front cover at least once a day is advisable.
Do not forget to regularly check the peel containers.
It is not necessary to use specialized products.
All parts can be washed in the dishwasher (it is advisable to clean the front cover by hand).
The front covers of our juicers are
comprised of polycarbonate and
ABS models.
For this reason, we advise not
cleaning them in the dishwasher
to prevent scratches or defects.
Z40 NATURE Adapt Cabinet
Maintenance
and cleaning tips

The machines must be cleaned and disinfected as frequently as indicated above. In
this process, first remove all the solid waste, and then clean and disinfect. The
following types of products can be used to disinfect the machines:
Descaling detergents/disinfectants for food use: Used either by immersion (small parts) or
sprayed (large parts and stainless-steel front of machine) in the concentration
recommended by the manufacturer. Each product must be left to act for the time indicated,
and then rinsed well to avoid contact of the juice with the product. These products usually
have a very high pH, which, with time, may degrade the polycarbonate, so it is advisable not
to exceed the product action times on transparent plastic parts.
Chlorinated disinfectant detergents for food use: Same use as the previous products. They
can be used by immersion or sprayed, bearing in mind the time recommendations given by
the manufacturer. Thoroughly rinse the parts treated before they come in contact with the
juice again.
Another option can be solutions with domestic use (4% chlorine) or industrial use (10%
chlorine) bleach. The necessary concentration for it to be effective at room temperature is
100 ppm, which means 2.5 ml of domestic bleach for every litre of water, or 1 ml of industrial
bleach per litre of water.
Juice extraction area:
o Juice extraction tray
o Blade
o Cups
o Adapt tray
o Tap*
o Front cover sides
o Front cover
o Chutes/containers.
o Stainl. steel machine front
Clean the following
components at least once a
day:
Feeder:
oInterior basket and separators.
oHopper track**
Cabinet:
oBody and interior of cabinet
oWaste containers
Clean weekly or twice a week when
required:
*These parts are handled by customers, so special attention is recommended.
Keeping a spare part is advisable, so that it can be changed half-way through the day.
** These parts are in contact with the fruit, so it is advisable to increase washing
frequency in spring and summer.
MAINTENANCE INSTRUCTIONS
Z40 NATURE Adapt Cabinet

Unplug the machine
from the mains.
With the machine stopped
press the off button.
Turn the flange upwards
and remove the side of the
front cover.
.
Now remove the other side
of the front cover, turning the
flange.
.
Do not forget to fit
the blade protector.
Unscrew the nuts and
extract the Adapt tray
Unscrew the cups.
Unscrew the balls
To remove the juice extraction
system, pull it outwards
Separate the two chutes.
Turn the locking flange Remove the basket turning it in
anti-clockwise direction.
1.
2.
4.
5.
6.
7.
8.
9.
10. 12.
13.
11.
Unscrew the nut and
extract the separator
DISASSEMBLY INSTRUCTIONS
C/ Cádiz, 4 - 46113 Moncada - Valencia (Spain) - ([phone] - [e-mail] - www.zummocorp.com
Z40 NATURE Adapt Cabinet
Extract the front cover.
3.
14. 15.
Separate the filter from the tray.

DISASSEMBLY INSTRUCTIONS
C/ Cádiz, 4 - 46113 Moncada - Valencia (Spain) - ([phone] - [e-mail] - www.zummocorp.com
Z40 NATURE Adapt Cabinet
Extract the upper separator
Press the side flanges to extract
the tap from the tray.
15.
1.
Remove the lower separator.
You can change the tap mode by
rotating the wheel,
Extract the lower basket.
17.
2.
18.
Instructions to dismount the Adapt tray.

Fit the lower basket. Fit the lower separator Fit the upper separator.
Screw the balls.Fit the juice extraction system
together with the cups.
Screw the nuts.
Fit the sweeper and insert it
into the Adapt tray.
Insert the filter into the Adapt tray.
Screw the nuts of the
Adapt tray.
Insert the Adapt tray.
1.
2. 3.
7.
9.
10. 12.
13. 14. 15.
11.
ASSEMBLY AND CLEANING INSTRUCTIONS
Z40 NATURE Adapt cabinet
4. Screw the nut. 5. Insert the basket.6. Activate the locking flange
C/ Cádiz, 4 - 46113 Moncada - Valencia (Spain) - ([phone] - [e-mail] - www.zummocorp.com
8.
Turn the lower flange and fit
one side of the front cover.
Remove the blade protector.

Insert the front cover. Turn the lower flange and fit the
other side of the front cover.
Fit the chutes.
Clean all parts with water
and liquid detergent.
Also suitable for dishwashers
(Except front cover)
1.
ASSEMBLY AND CLEANING INSTRUCTIONS
Z40 NATURE Adapt cabinet
Plug the machine into
the mains.
Press the on button.
C/ Cádiz, 4 - 46113 Moncada - Valencia (Spain) - ([phone] - [e-mail] - www.zummocorp.com
2.
16.
19. 20.
17. 18.
D100722/20-1