AGCO Glencoe CP40 CULTIPACKER User manual

Glencoe®
CP40 CULTIPACKER
4’ - 16’ MODELS
OPERATOR’S
MANUAL
Form number 1PD780598
May, 1998

Table of Contents
INTRODUCTION
DEALER/CUSTOMER INFORMATION
TO THE DEALER: ................................2
TO THE CUSTOMER: ..............................2
SPECIFICATIONS
MODEL SPECIFICATIONS ...........................3
SAFETY
SAFETY DECALS ................................4
SAFETY PRECAUTIONS ............................5
TORQUE CHART
BOLT TORQUE CHART - COARSE THREAD..................8
OPERATION
PRE-OPERATING CHECK LIST.........................9
FIELD OPERATION ...............................9
PROCEDURE FOR HITCHING.........................10
PROCEDURE FOR UNHITCHING .......................10
MAINTENANCE & SERVICE
ROLLERS ....................................11
LUBRICATION .................................11
TRANSPORT & STORAGE
TRANSPORT ..................................12
TRANSPORT & STORAGE
SMV EMBLEM .................................13
TRANSPORT CHAIN ..............................13
STORAGE ...................................13
ASSEMBLY INSTRUCTIONS
PREPARATION .................................15
LIGHT KIT ASSEMBLY 12’, 14’ and 16’ Machines ...............17
OPTIONAL EQUIPMENT
TRANSPORT KIT ................................25
SCRAPERS ...................................27
PREDELIVERY INSPECTION & SERVICE REPORT
i

NOTES
ii

INTRODUCTION
This manual is written purposely to acquaint new owners of the Glencoe® CP40 Cultipacker with the
functions of the various component parts of the machine as well as the service and safe operation which is
vital to long life and optimum performance. Read this manual completely before you begin operating your
CP40 Cultipacker.
The terms “right” and “left”, “front” and “rear”, refer to the machine by facing in the direction of forward travel.
1
GNC0075