Alcatel-Lucent OpenTouch 8018 User manual

OmniPCX Office
Rich Communication Edition
8018 DeskPhone
User Manual
8AL90331ENAAed01-1617

8018 DeskPhone
8AL90331ENAAed01
2 /46
Introduction
Thank you for choosing our DeskPhone. We hope it will give you entire satisfaction.
This model offers enhanced ergonomical features for more effective communication.
This manual describes the services offered by the 8018 DeskPhone connected to an OmniPCX Office
RCE system.
The labels and icons presented in this document are not contractually binding and may be modified
without prior warning.

8018 DeskPhone
8AL90331ENAAed01
3 /46
1GETTING TO KNOW YOUR TELEPHONE............................................................................................6
1.1 8018 DESKPHONE.......................................................................................................................................6
1.2 DESCRIPTION OF THE CONNECTORS ..................................................................................................................6
1.3 WELCOME SCREENS......................................................................................................................................7
1.4 NAVIGATION ..............................................................................................................................................7
1.5 CHANGING OR UPDATING THE PHONE LABEL .......................................................................................................8
1.6 STATUS ICONS /CALL ICONS...........................................................................................................................8
1.7 FEATURES KEYS ...........................................................................................................................................9
1.8 PREPROGRAMMED KEYS................................................................................................................................9
1.9 ALPHABETIC KEYBOARD.................................................................................................................................9
1.10 CALL MANAGEMENT SCREEN.......................................................................................................................10
2USING YOUR TELEPHONE.................................................................................................................11
2.1 MESSAGING PORTAL ..................................................................................................................................11
2.2 CONSULTING THE CALL LOG ..........................................................................................................................12
2.3 MAKING A CALL ........................................................................................................................................13
2.4 RECEIVING A CALL ......................................................................................................................................14
2.5 USING THE TELEPHONE IN 'HANDS FREE'MODE .................................................................................................14
2.6 ACTIVATING THE LOUDSPEAKER DURING A CONVERSATION (HANDSET LIFTED)-LOUDSPEAKER. ......................................14
2.7 CALLING A CONTACT USING THE SEARCH BY NAME FEATURE..................................................................................15
2.8 MAKE CALLS VIA YOUR PROGRAMMED CALL KEYS ..............................................................................................15
2.9 FILTERING CALLS USING THE VOICE MAILBOX.....................................................................................................16
2.10 REDIALING .............................................................................................................................................16
2.11 REQUESTING AUTOMATIC CALLBACK IF INTERNAL NUMBER IS BUSY.......................................................................16
2.12 CANCELLING AN AUTOMATIC CALLBACK .........................................................................................................16
2.13 RECEIVING INTERCOM CALLS.......................................................................................................................17
2.14 SENDING DTMF SIGNALS ..........................................................................................................................17
2.15 MUTE,SO THAT YOUR CALLER CANNOT HEAR YOU............................................................................................17
2.16 SENDING AN INSTANT MESSAGE TO A CONTACT ...............................................................................................18
2.17 ANSWERING WITH AN INSTANT MESSAGE ......................................................................................................19
2.18 CONSULTING INSTANT MESSAGES.................................................................................................................20
3DURING A CONVERSATION...............................................................................................................21
3.1 MAKING A SECOND CALL DURING A CONVERSATION ...........................................................................................21
3.2 ANSWERING A SECOND CALL DURING A CONVERSATION ......................................................................................22
3.3 SWITCHING BETWEEN CALLS (BROKER CALL).....................................................................................................22
3.4 TRANSFERRING A CALL ................................................................................................................................22
3.5 TRANSFER A CALL TO A VOICE MAIL ................................................................................................................23
3.6 THREE-WAY CONFERENCE WITH INTERNAL AND/OR EXTERNAL CALLERS (CONFERENCE) ...............................................23
3.7 PLACING A CALL ON HOLD (HOLD) ..................................................................................................................23
3.8 PLACING AN OUTSIDE CALL ON HOLD (PARKING) ................................................................................................24
3.9 INTRUSION INTO AN INTERNAL CONVERSATION .................................................................................................24
3.10 STORE A NUMBER ....................................................................................................................................24
3.11 ADJUST AUDIO VOLUME ............................................................................................................................24

8018 DeskPhone
8AL90331ENAAed01
4 /46
4'MEET ME ' CONFERENCE .................................................................................................................25
4.1 INITIATE A 'MEET ME 'CONFERENCE ...............................................................................................................25
4.2 JOIN A 'MEET ME 'CONFERENCE....................................................................................................................25
5SHARING...............................................................................................................................................26
5.1 RECEIVING SUPERVISED CALL RINGING.............................................................................................................26
5.2 ANSWERING THE GENERAL BELL.....................................................................................................................26
5.3 MANAGER/ASSISTANT FILTERING ..................................................................................................................26
5.4 CALL PICK-UP............................................................................................................................................26
5.5 HUNTING GROUPS .....................................................................................................................................27
5.6 CALLING AN INTERNAL CALLER ON HIS/HER PAGER .............................................................................................27
5.7 ANSWERING A CALL ON YOUR PAGER ..............................................................................................................27
5.8 CALLING A CALLER ON HIS/HER LOUDSPEAKER...................................................................................................28
5.9 SEND A VOICE MESSAGE COPY.......................................................................................................................28
5.10 SENDING A RECORDED MESSAGE TO A NUMBER OR A DISTRIBUTION LIST................................................................28
5.11 BROADCASTING A MESSAGE ON THE LOUDSPEAKERS OF A STATION GROUP.............................................................29
6KEEP IN TOUCH...................................................................................................................................30
6.1 SELECTING CALLS TO BE FORWARDED ..............................................................................................................30
6.2 FORWARDING CALLS TO ANOTHER NUMBER (IMMEDIATE FORWARD)......................................................................30
6.3 FORWARDING YOUR CALLS TO YOUR VOICE MESSAGE SERVICE...............................................................................30
6.4 WHEN YOU RETURN,CONSULT RECORDED MESSAGES .........................................................................................30
6.5 ACTIVATEDISABLE THE PERSONAL ASSISTANT ....................................................................................................31
6.6 PERSONAL ASSISTANT:REACHING YOU WITH ONE NUMBER ONLY...........................................................................31
6.7 FORWARDING CALLS TO YOUR PAGER .............................................................................................................31
6.8 FORWARDING YOUR CALLS FROM THE RECEIVING TERMINAL ('FOLLOW ME').............................................................32
6.9 DIVERTING ALL GROUP CALLS........................................................................................................................32
6.10 CANCELLING ALL FORWARDS.......................................................................................................................32
6.11 CANCELLING A SPECIFIC FORWARD ...............................................................................................................32
6.12 FORWARDING CALLS WHEN YOUR LINE IS BUSY (FORWARD IF BUSY)......................................................................32
6.13 DO NOT DISTURB .....................................................................................................................................33
6.14 LEAVING A RECORDED MESSAGE FOR INTERNAL CALLERS ....................................................................................33
6.15 CONSULTING WRITTEN MESSAGES................................................................................................................34
6.16 MESSAGE NOTIFICATION............................................................................................................................34
7MANAGING YOUR CHARGES ............................................................................................................35
7.1 CHARGING YOUR CALLS DIRECTLY TO BUSINESS ACCOUNTS ...................................................................................35
7.2 FINDING OUT THE COST OF AN OUTSIDE CALL MADE FOR AN INTERNAL USER FROM YOUR TERMINAL ...............................35

8018 DeskPhone
8AL90331ENAAed01
5 /46
8PROGRAMMING YOUR TELEPHONE................................................................................................36
8.1 INITIALIZING YOUR VOICE MAILBOX ................................................................................................................36
8.2 CUSTOMIZING YOUR VOICE GREETING .............................................................................................................36
8.3 MODIFYING YOUR PERSONAL CODE ................................................................................................................36
8.4 ADJUSTING THE AUDIO FUNCTIONS ................................................................................................................37
8.5 ADJUSTING THE CONTRAST OF THE DISPLAY ......................................................................................................38
8.6 SELECTING THE WELCOME PAGE ....................................................................................................................38
8.7 SELECTING LANGUAGE ................................................................................................................................38
8.8 PROGRAM THE KEYS FOR THE PERSO PAGE .......................................................................................................38
8.9 PROGRAMMING DIRECT CALL KEYS (PROGRAMMED KEYS WITH LEDS AND F1/F2 KEYS) ..............................................38
8.10 MODIFY THE PROGRAMMED KEY .................................................................................................................39
8.11 DELETE A PROGRAMMED KEY......................................................................................................................39
8.12 PROGRAMMING AN APPOINTMENT REMINDER................................................................................................40
8.13 IDENTIFY THE TERMINAL YOU ARE ON............................................................................................................40
8.14 LOCK /UNLOCK YOUR TELEPHONE................................................................................................................40
8.15 ACTIVATING/DEACTIVATING 'FORCED HEADSET'MODE .....................................................................................41
8.16 INSTALLING A USB ACCESSORY (HEADSET,HANDSFREE,LOUDSPEAKER)................................................................41
8.17 CONTACTING YOUR ADMINISTRATOR ............................................................................................................41
9ACD: AGENT SET/ SUPERVISOR STATION.....................................................................................42
9.1 AGENT SET...............................................................................................................................................42
9.2 OPEN AN AGENT SESSION (LOGIN)–AGENT SET ................................................................................................42
9.3 ACD APPLICATION WELCOME SCREEN –AGENT SET............................................................................................42
9.4 THE FOUR OPERATING STATUSES OF THE AGENT SET ...........................................................................................43
9.5 CHANGING THE OPERATING STATUS OF THE SET –AGENT SET................................................................................43
9.6 MODIFYING YOUR PERSONAL CODE –AGENT SET...............................................................................................43
9.7 INTEGRATING ANOTHER GROUP/LEAVING A GROUP –AGENT SET ..........................................................................43
9.8 CLOSE THE AGENT SESSION (LOGOUT)–AGENT SET............................................................................................43
9.9 SUPERVISOR STATION .................................................................................................................................44
9.10 SUPERVISING GROUP MAILBOXES –SUPERVISOR STATION..................................................................................44
10 GUARANTEE AND CLAUSES...........................................................................................................45
10.1 SAFETY INSTRUCTIONS ..............................................................................................................................45
10.2 REGULATORY STATEMENTS ........................................................................................................................46

8018 DeskPhone
8AL90331ENAAed01
6 /46
1 Getting to know your telephone
1.1 8018 DeskPhone
Your phone has 4 programmable keys with led and paper label. These keys are use to program a direct
call. You can use the paper to describe the key.
1.2 Description of the connectors
10/100/1000 Gigabit Ethernet connector (LAN).
10/100/1000 Gigabit Ethernet connector (PC).
DC power jack for an external power adaptor.
RJ9 connector for a corded handset.
Add-on module connector.
USB connector for headset.
Handset
Loudspeaker
LED
Flashing green: Arrival of a new call /
Appointment alarm.
3 preprogrammed keys with
Led and paper icon: Alpha-
numeric key, F1, F2.
4 programmable keys with Led
and paper label.
Permanent feature keys: quick
access to the phone's main features.
Stable
foot
Monochrome graphical screen
with backlit (128x64 pixels).
6 dedicated functions keys.
Navigation
USB connector for headset

8018 DeskPhone
8AL90331ENAAed01
7 /46
1.3 Welcome screens
You can access all of your phone's features from these screens. The default display has three pages
that you can access by selecting the corresponding tab at the top of the screen with the navigation keys.
The selected page is highlighted.
oMenu.
oPerso.
oInfo.
Menu page:
Contains all features and applications, which are accessed by pressing the key corresponding to
the desired feature or application. From this page, it is possible to adjust the ringer volume,
program the time of an appointment, lock the terminal, define the default page displayed,
configure voice mail, and access telephone functions such as calling back one of the last
numbers or intercepting calls.
Perso page:
Contains call line keys (allowing supervision of calls) and programmable call keys.
Info page:
Contains information on the telephone and the status of its functions: name, telephone number,
number of messages, activation of transfer function, appointment reminder, etc.
Transfer icon:
Press the key next to this icon allows you to program or change the transfer function.
Press the key in front of the label to select the corresponding feature.
1.4 Navigation
OK key:
Use to validate your choices and options while
programming or configuring.
Use to validate an edited text.
Use to switch off/on the screen when the phone is in idle
mode.
Left-right navigator:
Use to move from one page to another and display
information about current calls (call in progress, calls on
hold, incoming call).
Use to navigate into a text box.
Up-down navigator:
Use to scroll through the content of a page.
Back/Exit/Backspace key
Use this key to go back to the previous step.
Use this key to go back to the homepage (long press).
Use this key to delete one number or character at a time.

8018 DeskPhone
8AL90331ENAAed01
8 /46
1.5 Changing or updating the phone label
Removing the phone label
Lift the protective cover at the notch and slide it up to take it out of its
housing.
Remove the phone label in the same way.
Update or replace the phone label.
Inserting the phone label
Insert the phone label from the top end, making sure it is placed
correctly behind the notches.
Put the protective cover back in the same way.
1.6 Status icons / Call icons
Icons giving information about some specific configurations of the phone or about call status are
displayed in the top bar of the screen.
Headset connected.
Telephone locked.
Appointment programmed.
Incoming call icon.
Call in progress icon.
Call holding icon.
2
1

8018 DeskPhone
8AL90331ENAAed01
9 /46
1.7 Features keys
Mute and intercom key.
During a call, press this key to stop your contact from hearing you. When idle, press this
key to switch the phone to intercom mode. When you receive a call, the phone hooks off
automatically and you go straight into handsfree mode. This key lights up blue when
activated.
Turn down the volume / Lower the contrast.
Turn up the volume / Increase the contrast.
Pressing this key answers an incoming call in handsfree mode (the key is blue). When a
call is in progress, pressing this key switches from handsfree mode to headset or handset
mode.
Messaging key to access various mail services. This key flashes when you have a new
voicemail, text message or callback request.
Access the call log.
The redial key is associated with the off hook key when the phone is in idle state.
Last number redial (short press).
Call back one of the last 8 numbers dialed (long press).
1.8 Preprogrammed keys
The 8018 DeskPhone uses 3 preprogrammed keys to access some features. In this
case, the icon of the feature is printed on the paper. Use the feature by pressing the
corresponding key. When activated, the LED corresponding to the key remains lit up.
Press the corresponding key to deactivate it.
123<>abc Alpha-numerical keypad
Use this key to switch between alphabetic keyboard and numeric keyboard.
Programmable keys (F1 and F2 keys). A service or a direct call can be associated to these
keys.
1.9 Alphabetic keyboard
Your phone is equipped with alphanumeric keyboard. You can switch between
numeric keyboard to dial number, and alphabetic keyboard to enter text by pressing
the corresponding programmed key (usually the first programmed key).
123<>abc Switch the keyboard to the alphabetic mode by selecting the associated programmed
key. When activated, the LED corresponding to the key remains lit up.

8018 DeskPhone
8AL90331ENAAed01
10 /46
Enter alphabetic characters.
The number pad keys have letters that you can display by successive presses. The number is
the last character in the series. Some special characters can be displayed by successively
pressing the key:
o: % $ / ~ & ( ) [ ] = *
o: @ #
o: space - _ 1
o: + . , ; : / \ ? ! 0
Use navigation keys to move the cursor into the text.
delete the last entered character. The alphabetic mode remains activated.
123<>abc Select the lit programmed key to return to the numeric mode.
1.10Call management screen
Incoming call icon, Call in
progress, Call on hold, …
Incoming call and
conversation presentation
screen
Soft keys: actions available
depending on the call status
Each tab corresponds to a call, the status of which is symbolized by its icon
(in progress, call on hold, arrival of new call). When a call is in progress, use
the left-right navigator to look at held or incoming calls.
All features are accessible while the call is displayed on the screen. Use the
Up and Down arrows to move up or down a page. These functions (transfer,
conference, etc.) are directly related to the status of the call consulted. For
example, the transfer function will not be available between a call in progress
or a call on hold and an incoming call.
Used to switch from a telephone screen to an application screen. For
example, it can be used while a call is in progress to search a number,
program an appointment reminder, etc.
Calls can also be managed from the Perso page.
While the call is in progress, press the Back/Exit key and display the Perso page. Calls in progress or
waiting calls are displayed on the different line keys. It is then possible to converse with the caller of
your choice by pressing the key associated to the caller.

8018 DeskPhone
8AL90331ENAAed01
11 /46
2 Using your telephone
2.1 Messaging portal
The messaging portal allows you to access and manage features such as the call log, instant messaging
and voice messages. When there is a new event (new log, new instant message or new voice message)
the message key blinks blue.
Accessing the messaging portal
Press the message key to access the messaging portal.
Enter your password if required.
Configure access to the messaging portal
The system default setting requires you to enter a password to access the messaging portal features.
The password information is retained for a few seconds so that if you quit the messaging portal you can
access it again after a few seconds without having to re-enter your password. The length of this time-out
depends on your system configuration. For more information, contact your installer or administrator.
You can change the setting so that you don't have to enter a password each time you want to access the
messaging portal features.
Access the messaging portal (Enter your password if required).
Config
Authentication
Enter your personal password.
Set authentication to on or off.
On: password is always required.
Off: password is never required.
Press or select OK to confirm.
Accessing the features of the messaging portal
To access the available features (call log, instant messages IM, voice messages, sending an instant
message), press the associated softkey.
Acknowledging
When you consult a new event (call log, instant message or voice message), the event is automatically
acknowledged. However, you can choose to acknowledge all events without consulting them.
Press the associated softkey.
Press the softkey associated with the type of event you want to acknowledge. If you press
the key associated with the 'all' option, all new events are acknowledged. You can also
acknowledge all events if you press the softkey associated with the check icon in the top right
corner of the screen.
Press or select OK to confirm.

8018 DeskPhone
8AL90331ENAAed01
12 /46
Deleting
When consulting an event (call log, instant message or voice message), you can delete the event once
you have consulted it. However, you can choose to delete all events in one go.
Press the associated softkey.
Press the softkey associated with the type of event you want to delete.
Press or select OK to confirm.
2.2 Consulting the call log
At any time, you can consult all answered and unanswered incoming and outgoing calls. To do this, go
to the call log feature on the messaging portal.
Access the messaging portal (Enter your password if required).
Press the softkey associated with the call log feature.
You can choose between consulting missed calls only ('Missed' tab) and consulting all call logs
including unanswered/answered, incoming and/or outgoing calls ('All' tab).
Consulting missed calls
Using the left/right navigator key, select the 'Missed' tab.
Unacknowledged calls are in bold characters.
Using the up and down navigation key, select the log to consult.
Display the log details.
Information such as the name, phone number, date and time are displayed on the screen.
You can choose to call the contact, send an instant message to the contact, save the contact in
the personal phonebook, or clear the log.
Acknowledge all missed calls:
Once a new log is consulted, it is automatically acknowledged.However, you can acknowledge all
new missed calls without consulting them.
Press the associated softkey.
Press the associated softkey.
Press or select OK to confirm.
All missed calls are acknowledged.
Delete all missed calls:
Press the associated softkey.
Press the associated softkey.
Press or select OK to confirm.
All missed calls are deleted.

8018 DeskPhone
8AL90331ENAAed01
13 /46
Consulting all calls
Using the left/right navigator key, select the 'All' tab.
All calls are displayed with an icon giving information on the type of call.
Answered outgoing calls
Answered incoming calls
Unanswered outgoing calls
Unanswered incoming calls
Using the up and down navigation key, select the log to consult.
Display the log details.
Information such as the name, phone number, date and time are displayed on the screen.
You can choose to call the contact, send an instant message to the contact, save the
contact in the personal phonebook, or clear the log.
Acknowledge all missed calls:
Press the associated softkey.
Press the associated softkey.
Press or select OK to confirm.
All missed calls are acknowledged.
Delete all call logs:
Press the associated softkey.
Press the associated softkey.
Press or select OK to confirm.
All call logs are deleted.
2.3 Making a call
Use one of the following:
Dial directly the number for your call.
Lift the receiver Enter the destination number.
Hands free Dial the destination number.
Programmed line key.
123<>abc Search by name (access the search by name feature by selecting the alphabetic
mode).
From call log after accessing the messaging portal.
Redial last number.
To make an external call, dial the outside line access code before dialing your contact number.
The duration of your external call may be limited in time by the administrator. In this case, a beep sounds
and/or a message will be displayed on the screen 20 seconds before the end of the communication.
If the internal or outside number does not reply:
Use one of the following:
Request callback to a busy terminal
¤Callback

8018 DeskPhone
8AL90331ENAAed01
14 /46
2.4 Receiving a call
Use one of the following:
Lift the receiver.
Hands free.
Press the key next to the incoming call icon.
2.5 Using the telephone in 'Hands free' mode
Terminal idle:
Press and release. Dial the number you want to call. You are in hands free mode.
At the end of the conversation, terminate the call.
Call in progress:
During a conversation.
Press and release You are in hands free mode.
During a conversation, you can lift the receiver without terminating the call.
2.6 Activating the loudspeaker during a conversation (handset lifted)-
Loudspeaker.
During a conversation.
Activate loudspeaker The key lights up.
Adjust volume (9 levels).
Deactivate loudspeaker The key is no longer lit.
Press and release the loudspeaker key to switch to hands free mode (light steady).

8018 DeskPhone
8AL90331ENAAed01
15 /46
2.7 Calling a contact using the search by name feature
You can call a contact using the search by name feature. This feature enables you to call a contact
directly on their company phone or call them on another phone using their contact card.
123<>abc Switch the keyboard to the alphabetic mode by selecting the associated programmed
key. When activated, the LED corresponding to the key remains lit up.
Enter the first letters of the name.
When entering the name you can extend the search by adding the first letters of the first name
after entering the '#' symbol or pressing: 1stname.
You can change the search function from 'search by name' to 'predictive search': select the menu
option and set the unified directory to 'Off'.
Start the search.
A list of matching names is displayed on the screen. Each contact is displayed with their name
and company phone number.
Use one of the following:
oDisplay the previous and next names.
oSelect the name of the person you wish to call.
oModify the search.
Call your contact using the company phone number
Press the key associated with the company phone number.
Call your contact using another phone number (via contact card):
Press the softkey associated with the contact name:
The contact card opens and displays information about the contact: last name and first name, several
phone numbers (Office, mobile, home), email address, instant message address and the company
name.
Scroll through the screen with the up and down navigation keys and position the cursor on the
contact phone number you wish to call.
Start the call.
You can change the search function from 'search by name' to 'predictive search' by switching the unified
directory to internal directory (available once a 'search by name' is started). Please be aware that
predictive searching means that you won't have access to the contact card, and therefore can only call
the contact on their company phone or send instant messages.
2.8 Make calls via your programmed call keys
Access the 'Perso' page.
Find the caller you want to call from the programmed call keys.
Call the chosen caller.

8018 DeskPhone
8AL90331ENAAed01
16 /46
2.9 Filtering calls using the voice mailbox
This service lets you filter incoming calls to your voice mailbox. When your caller leaves his message
you can choose to communicate with him.
Activating call screening
Voice mail filtering programmed key.
Enter your personal password.
Same key to stop listening and deactivate the screening.
When you receive a call
You hear the message left by your caller.
Use one of the following:
Hands free to take the call.
Lift the receiver.
To stop listening only.
2.10Redialing
Redialing the last number dialed (redial)
(short press) Last number redial.
Call back on the last 10 numbers dialed
(long press).
Select the number to redial from the last 50 dialed numbers.
or Start the call.
You can also access this feature through the menu:
Reach the 'Menu' page.
Redial list
Select the number to redial from the last 50 dialed numbers.
2.11Requesting automatic callback if internal number is busy
Internal number busy.
Call back Callback request acknowledged.

Automatic callback is not available if the set of your caller is free or if you are put on hold when the set is
busy.
2.12Cancelling an automatic callback
When your phone rings.
Call back Cancellation of callback request acknowledged.
Canceling the callback request is only possible when the caller you tried to reach released the line.

8018 DeskPhone
8AL90331ENAAed01
17 /46
2.13Receiving intercom calls
You can answer a call without lifting the receiver. When you receive a call, you are automatically
connected in hands-free mode. The identity of the caller is displayed on the screen.
To activate-Terminal idle:
Corresponding LED lights up.
When your caller hangs up, interphony mode remains active.
To deactivate-Terminal idle:
The corresponding LED goes out.
2.14Sending DTMF signals
During a conversation you sometimes have to send DTMF signals, such as with a voice server, an
automated attendant or a remotely consulted answering machine.
During a conversation.
Send DTMF
Enter DTMF code.
The function is automatically cancelled when you hang up.
2.15Mute, so that your caller cannot hear you
You can hear your caller but he/she cannot hear you:
From the set
During a conversation.
Disable microphone The key lights up.
Resume the conversation The key is no longer lit.

8018 DeskPhone
8AL90331ENAAed01
18 /46
2.16Sending an instant message to a contact
123<>abc Use the alpha-numeric keyboard key to switch between the numeric and alphabetic keyboard.
You can send an instant message to a contact by entering either their phone number or their name.
Sending an instant message using the search by name feature
Access the messaging portal (Enter your password if required).
SendIM
123<>abc Enter the first letters of the name.
When entering the name you can extend the search by adding the first letters of the first name
after entering the '#' symbol or pressing: 1stname.
Start the search.
A list of matching names is displayed on the screen. Each contact is displayed with their name
and company phone number.
Press the softkey associated with the contact name:
The contact card opens and displays information about the contact: last name and first name,
several phone numbers (Office, mobile, home), email address, instant message address and the
company name.
Scroll through the screen with the up and down navigation keys and position the cursor on the
instant message address.
Access instant message writing mode.
123<>abc Write the instant message to send.
Send the instant message.
Sending an instant message using the phone number
Access the messaging portal (Enter your password if required).
SendIM
Enter your contact's phone number.
Access instant message writing mode.
123<>abc Write the instant message to send.
Send the instant message.
Status of the instant messages
Once the instant message has been sent, the message is stored in the 'Sent' tab of the instant message
feature in the messaging portal. The status of the message is as follows:
Instant message has been sent but not yet delivered.
Instant message has been delivered.
Instant message has been read.

8018 DeskPhone
8AL90331ENAAed01
19 /46
2.17Answering with an instant message
123<>abc Use the alpha-numeric keyboard key to switch between the numeric and alphabetic keyboard.
You can send instant messages to your contacts when you have received an instant message or a
voicemail or you can send instant messages when consulting the call log.
Answering an Instant message
Access the messaging portal (Enter your password if required).
Select the instant message feature by pressing the associated softkey.
Using the left and right navigation keys, access one of the following tabs: new messages,
received messages, sent messages or all messages.
Using the up and down navigation keys, position the cursor on the instant message you want to
answer.
Select the instant message.
Answer the instant message by pressing the associated softkey.
123<>abc Write the instant message to send.
Send the instant message.
Answering a voice message
Access the messaging portal (Enter your password if required).
Select the voicemail feature by pressing the associated softkey.
Using the left and right navigation keys, access one of the following tabs: new voice messages or
all voice messages.
Using the up and down navigation keys, position the cursor on the voice message you want to
answer with an instant message.
When details of the voice message are displayed on the screen, press the softkey associated
with the instant message.
123<>abc Write the instant message to send.
Send the instant message.
Answering from the call log
Access the messaging portal (Enter your password if required).
Press the softkey associated with the call log feature.
Using the left and right navigation keys, access one of the following tabs: missed calls or all calls.
Using the up and down navigation keys, position the cursor on the call log you want to consult.
Select the call log.
When details of the call log are displayed on the screen, press the softkey associated with the
instant message feature.
123<>abc Write the instant message to send.
Send the instant message.

8018 DeskPhone
8AL90331ENAAed01
20 /46
2.18Consulting instant messages
You are notified of a new event when the message key is flashing.
Access the messaging portal (Enter your password if required).
Select the instant message feature by pressing the associated softkey.
Using the left and right navigation keys, access one of the following tabs: new messages,
received messages, sent messages or all messages.
Using the up and down navigation keys, position the cursor on the instant message you want to
read.
Select the instant message.
Once the instant message is read, you can:
Answer the instant message by pressing the associated softkey.
Delete the instant message by pressing the associated key.
Press OK to call the sender of the instant message.
When a message is read, the status of the message changes from unread to read on both sides (on the
recipient side and the sender side).
You can use the filter key to consult messages sent by or to a particular contact. For example, when you
are on a message sent by a contact, pressing the filter key shows only messages sent to or by that
contact.
Acknowledge new instant messages
Once a new instant message is read, it is automatically acknowledged.However, you can acknowledge
all new instant messages without reading them.
Press the associated softkey.
Press the associated softkey.
All new instant messages are acknowledged.
Delete instant messages
When consulting the instant messages, you can choose to delete the messages stored in the following
tabs: new, sent, received or all messages.
Press the associated softkey.
Press the associated softkey.
Confirm deletion.