Amazone Avant 6002-2 Installation instructions

Original operating manual
Mounted seeding combination
Avant 6002-2 seeding unit
SmartLearning
www.amazone.de

Please enter the identication data of the implement. The identication data can be found on
the rating plate.

TABLE OF CONTENTS
1 About this operating manual 1
1.1 Diagrams 1
1.1.1 Warnings and signal words 1
1.1.2 Further instructions 1
1.1.3 Instructions 2
1.1.4 Lists 3
1.1.5 Item numbers in figures 3
1.2 Other applicable documents 4
1.3 Your opinion is important 4
2Safety and responsibility 5
2.1 Basic safety instructions 5
2.1.1 Meaning of the operating manual 5
2.1.2 Safe operating organisation 5
2.1.3 Knowing and preventing dangers 10
2.1.4 Safe operation and handling of the
machine 12
2.1.5 Safe maintenance and modification 15
2.2 Safety routines 19
3Intended use 22
4 Product description 23
4.1 Implement overview 23
4.2 Function of the implement 24
4.3 Special equipment 24
4.4 Protective equipment 25
4.4.1 Road safety bars 25
4.5 Warning symbols 26
4.5.1 Positions of the warning symbols 26
4.5.2 Layout of the warning symbols 26
4.5.3 Description of the warning symbols 27
4.6 Threaded cartridge 28
4.7 Mounting frame 28
4.8 Universal operating tool 29
4.9 Lighting and identification to the
rear 29
4.10 Electronic drive monitoring 30
4.11 Transport frame 30
4.12 Additional license plate 31
4.13 Segment distributor head 31
4.14 TwinTeC coulter 32
4.15 RoTeC coulter 32
4.16 Coulter harrow 33
4.17 Exact following harrow 34
4.18 Tramline marker 34
4.19 Work lights 35
4.20 Rating plate on the implement 36
4.21 mySeeder app 36
5 Technical data 37
5.1 Dimensions 37
5.2 Soil tillage tool 37
5.3 Permitted mounting categories 37
5.4 Optimal working speed 38
5.5 Performance characteristics of
the tractor 38
5.6 Noise development data 38
5.7 Drivable slope inclination 39
6Preparing the machine 40
6.1 Calculating the required tractor
characteristics 40
6.2 Coupling the implement 43
6.2.1 Coupling the supply lines to the
hose package 43
6.2.2 Coupling the hydraulic hose lines 43
6.2.3 Coupling the power supply 45
6.2.4 Coupling the ISOBUS line 46
6.2.5 Coupling the 3-point mounting frame 46
6.2.6 Coupling the Avant seeding unit 46
TABLE OF CONTENTS
MG6545-EN-II | B.1 | 22.07.2021 I

6.2.7 Installing the lighting on the seeding
unit 50
6.3 Preparing the implement for
operation 51
6.3.1 Adjusting the working position sensor 51
6.3.2 Folding the lighting 52
6.3.3 Unfolding the implement 52
6.3.4 Adjusting the placement depth on
the TwinTeC coulter 52
6.3.5 Adjusting the placement depth on
the RoTeC coulter 53
6.3.6 Adjusting the coulter pressure
hydraulically 54
6.3.7 Adjusting the coulter pressure
mechanically 55
6.3.8 Adjusting the additional coulter
pressure on the TwinTeC coulter 56
6.3.9 Lifting the coulters hydraulically 56
6.3.10 Lifting the coulters mechanically 57
6.3.11 Adjusting the coulter harrow 57
6.3.12 Adjusting the exact following harrow 60
6.3.13 Adjusting the tramline marker on
the implement frame 66
6.3.14 Removing the road safety bars 70
6.3.15 Starting work with one part-width
section 71
6.3.16 Adjusting the row spacing 71
6.4 Preparing the machine for road
travel 72
6.4.1 Putting on the road safety bars 72
6.4.2 Unfolding the lighting 73
6.4.3 Folding the tramline marker onto
the implement frame 73
6.4.4 Folding the implement 73
6.4.5 Road travel with an Avant seeding
combination 74
6.5 Calculating the permissible
payload 74
7Using the machine 76
7.1 Using the implement 76
7.2 Checking the placement depth 77
7.3 Turning on the headlands 77
8Parking the machine 78
8.1 Parking the TwinTeC coulter 78
8.2 Disconnecting the supply lines
from the hose package 78
8.3 Disconnecting the hydraulic
hose lines 79
8.4 Uncoupling the ISOBUS line 79
8.5 Uncoupling the power supply 80
8.6 Uncoupling the Avant seeding
combination 80
8.7 Parking the Avant seeding unit
separately 81
8.8 Installing the lighting on the soil
tillage implement 86
9Repairing the machine 88
9.1 Maintaining the machine 88
9.1.1 Maintenance schedule 88
9.1.2 Checking the TwinTeC concave disc 89
9.1.3 Checking the TwinTeC concave disc
spacing 89
9.1.4 Checking the TwinTeC depth control
wheel 91
9.1.5 Checking the TwinTeC depth control
wheel scraper 91
9.1.6 Checking the depth control discs
and depth control wheels 92
9.1.7 Checking the cutting discs 94
9.1.8 Checking the RoTeC furrow former 94
9.1.9 Cleaning the segment distributor
head 95
9.1.10 Checking the top link pin and lower
link pin 95
9.1.11 Checking the hydraulic hose lines 96
9.1.12 Cleaning the conveyor section 97
9.2 Lubricating the implement 98
9.2.1 Overview of lubrication points 99
9.3 Eliminating faults 100
TABLE OF CONTENTS
MG6545-EN-II | B.1 | 22.07.2021
II

9.4 Cleaning the machine 106
10 Loading the machine 107
10.1 Lashing the machine 107
10.2 Lifting the implement 108
11 Appendix 109
11.1 Bolt tightening torques 109
11.2 Other applicable documents 110
12 Directories 111
12.1 Glossary 111
12.2 Index 112
TABLE OF CONTENTS
MG6545-EN-II | B.1 | 22.07.2021 III

About this operating manual 1
1.1 Diagrams
1.1.1 Warnings and signal words
Warnings are marked with a vertical bar with a
triangular safety symbol and the signal word. The
signal words "DANGER", "WARNING" or "CAUTION"
describe the severity of the potential danger and have
the following meanings:
DANGER
Indicates a direct threat with high risk for
severe physical injury, such as loss of
limbs or death.
WARNING
Indicates a possible threat with moderate
risk for severe physical injury or death.
CAUTION
Indicates a threat with low risk for light or
moderately severe physical injuries.
1.1.2 Further instructions
IMPORTANT
Indicates a risk for damage to the
implement.
CMS-T-00000081-D.1
CMS-T-005676-C.1
CMS-T-00002415-A.1
CMS-T-00002416-A.1
1 | About this operating manual
MG6545-EN-II | B.1 | 22.07.2021 1

ENVIRONMENTAL INFORMATION
Indicates a risk for environmental
damage.
NOTE
Indicates application tips and instructions for
optimal use.
1.1.3 Instructions
Numbered instructions
Actions that have to be performed in a specific
sequence are represented as numbered instructions.
The specified sequence of the actions must be
observed.
Example:
1. Instruction 1
2. Instruction 2
1.1.3.1 Instructions and responses
Reactions to instructions are marked with an arrow.
Example:
1. Instruction 1
Reaction to instruction 1
2. Instruction 2
1.1.3.2 Alternative instructions
Alternative instructions are introduced with the word
"or".
CMS-T-00000473-B.1
CMS-T-005217-B.1
CMS-T-005678-B.1
CMS-T-00000110-B.1
1 | About this operating manual
Diagrams
MG6545-EN-II | B.1 | 22.07.2021
2

Example:
1. Instruction 1
or
Alternative instruction
2. Instruction 2
Instructions with only one action
Instructions with only one action are not numbered,
but rather shown with a arrow.
Example:
Instruction
Instructions without sequence
Instructions that do not require a specific sequence
are shown as a list with arrows.
Example:
Instruction
Instruction
Instruction
1.1.4 Lists
Lists without an essential order are shown as a list
with bullets.
Example:
Point 1
Point 2
1.1.5 Item numbers in figures
A framed number in the text, e.g. a
1
, indicates an
item number in an adjacent figure.
CMS-T-005211-C.1
CMS-T-005214-C.1
CMS-T-000024-A.1
CMS-T-000023-B.1
1 | About this operating manual
Diagrams
MG6545-EN-II | B.1 | 22.07.2021 3

1.2 Other applicable documents
A list of other applicable documents can be found in
the Appendix.
1.3 Your opinion is important
Dear reader, our operating manuals are updated
regularly. Your suggestions for improvement help us
to create ever more user-friendly operating manuals.
Please send us your suggestions by post, fax or
email.
Fax: [phone]
Postfach 51
AMAZONEN-WERKE H. Dreyer SE & Co. KG
Technische Redaktion
D-49202 Hasbergen
E-Mail: [email protected]
CMS-T-00000616-B.1
CMS-T-000059-C.1
1 | About this operating manual
Other applicable documents
MG6545-EN-II | B.1 | 22.07.2021
4