Ballard Designs Millstone SK110 User manual

Prevent accidentally discarding small parts or
hardware. Retain all carton contents until assembly
and installation are complete.
REQUIRED TOOLS:
*Phillips Screwdriver
- Two person assembly suggested.
*used when joining Millstone Kitchen Island to **Millstone Table.
Kitchen Island ships FULLY ASSEMBLED.
**Millstone Table (SL203) SOLD SEPARATELY
Ltr.
A2
B4
Qty. Hardware Included
*Connector Plates
*8mm Wood Screws
LEVELERS: Island is equipped with Rotary Levelers installed under each Leg. If necessary, Island may
be adjusted by carefully lifting applicable corner and turning Leveler clockwise/counterclockwise.
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 11-29-2022 Page 1 of 2
PRODUCT NAME: Millstone Kitchen Island
ITEM NUMBER: SK110
ASSEMBLED DIMENSIONS : 37 1/4”H x 48”W x 30”D
MADE IN VIETNAM
Customer Service: 800-367-2810
Online: www.ballarddesigns.com

Page 2 of 2
Cleaning and Care
Avoid harsh or abrasive chemicals as finish damage may result.
Use coasters, trivets, placemats to protect surfaces.
Promptly remove spills. Dust with a soft, dry cloth.
Assemble in location for intended use.
CAUTION
Remove Connector Plates and
Scews BEFORE moving assembled
Table/Island.
Plates/Screws may be permanently
damaged.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
OPTIONAL: Connecting Millstone Kitchen Island (SK110) to Millstone Counter Height Table (SL203)
STEP 1: Follow Assembly Instructions for Table and fully assemble before proceeding.
NOTE: Assemble Table in area with Kitchen Island.
STEP 2: Place Kitchen Island in location for use. Slide assembled Table against one end and align
edges. NOTE: Levelers may need adjustment in order to align Table/Island Surfaces.
STEP 3: With Table and Island aligned and completely pushed together, place Connector Plates (E)
over seams between the two on both outer edges. Insert and fully tighten Wood Screws (F).