Ballard Designs SL168 User manual

Prevent accidentally discarding small parts or
hardware. Retain all carton contents until assembly
and installation are complete.
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 9-24-2020 Page 1 of 4
PRODUCT NAME: Millstone Counter Height Table
ITEM NUMBER: SL168
ASSEMBLED DIMENSIONS : 37 1/4”H x 48”W x 30”D
MADE IN CHINA
Customer Service: 800-367-2810
Online: www.ballarddesigns.com

Page 2 of 4
Ltr.
A8
B 8
Qty. Hardware Included
Ltr.
G
H
1
4
Qty. Components
C 8
REQUIRED TOOLS:
Allen Wrench (included),
*Phillips Screwdriver
-Two person assembly suggested.
Remove all parts, hardware and
protective packaging from carton
and carefully arrange on a clean,
level, padded surface.
D
E
F
1
2
4
Flat Washers
Lock Washers
5/16” x 2” Allen Bolts
M5 Allen Wrench
*Connector Plates
*8mm Wood Screws
*For connecting optional Millstone Kitchen Island (SK082). Sold Separately. See Page 4 for assembly details.
Top (G)
Legs (H)
Hardware Located Here (A~F)
G
H
Cleaning and Care
Avoid harsh or abrasive chemicals as finish damage may result.
Use coasters, trivets, place mats to protect surfaces. Promply remove spills.
Dust with a soft, dry cloth.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Assemble in location for intended use.

Page 3 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
LEVELERS: Table is equipped with Rotary Levelers installed under each Leg. If necessary, Table
may be adjusted by carefully lifting applicable corner and turning Leveler clockwise/counterclockwise.
Assemble in location for intended use.
STEP 1: Carefully invert Top (G) onto a level, padded surface then postion a leg into each corner as
illustrated. Insert Allen Bolt (C) with Lock Washer (B) and Flat Washer (A). Fully tighten using Allen
Wrench (D). Carefully turn assembled Table upright onto Legs.

Page 4 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Assemble in location for intended use.
OPTIONAL: Connecting Millstone Kitchen Island (SK082) to Millstone Counter Height Table (SL168)
STEP 1: Follow Assembly Instructions for Table and fully assemble before proceeding.
NOTE: Assemble Table in area with Kitchen Island.
STEP 2: Place Kitchen Island in location for use. Slide assembled Table against one end and align
edges. NOTE: Levelers may need adjustment in order to align Table/Island Surfaces.
STEP 3: With Table and Island aligned and completely pushed together, place Connector Plates (E)
over seams between the two on both outer edges. Insert and fully tighten Wood Screws (F).
CAUTION
Remove Connector Plates and Screws before moving assembled
Table/Island. Plates and Screws may be permanently damaged.