Ballard Designs MILES REDD SL083 User manual

PRODUCT NAME: MR Extension Bamboo Pedestal Dining Table
ITEM NUMBER: SL083
DIMENSIONS OF ITEM ASSEMBLED: 30”H x 84”W x 42”D
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 6/6/2017 Page 1 of 3
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN INDONESIA

Customer Service: 800-367-2810
Online: www.ballarddesigns.com Page 2 of 3
Ltr.
A
B
Allen Bolt
Lock Washer
8
8
C
D
Flat Washer
Aleen Wrench
8
1
Qty. Hardware Included
Ltr.
E
Table Top (E)
Extension Leaf (F)
Leg (G)
F
1
2
G 2
Qty. Components
NOTE: When unpacking,
lay the parts on a padded
surface such as the
packaging provided. Be sure
to locate all hardware before
throwing away any packaging.
TOOLS NEEDED:
-Assembly requires 2
or more people.

Page 3 of 3
STEP 1:
STEP 2:
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Cleaning & Care:
DO NOT use alcohol based products or spray polisher as they can damage the finish.
Dust with soft cloth. One to two times monthly, apply beeswax polish as needed.
NOTE: Assemble Console in the desired location for use.
Lay the Table Top (E) upside down on a smooth, clean surface such as the packaging provided.
Align the holes in the Leg (G) plate with the female inset nut pre-mounted on the underside
of the Top. Insert the Allen Bolts (A) through a Lock Washer (B), Flat Washer (C), the Top plate
and into the female inset nut. Tighten securely with the Allen Wrench (D).
(E)
(E) (F)
(C)
(G)
(B)
(A)
(D)
Unlock the Table Top (E) and pull it apart to insert or remove the Leaf/Leaves (F). The lock is
underneath the Table Top. To remove the Leaves, pull the ends apart so that the Leaves can
easily be lifted out. Push the ends together and lock the Top into place. To insert the Leaves,
place them on the guide rails and align the pegs on the Leaves with the holes in the Table Top.
Lock the Leaves in place.