Dometic SKYSOL AB User manual

TM24 Motor
© Dometic UK Blind Systems Ltd 2019 Tel: [phone] www.dometic.com OAT01419 Issue 03 February 2019
Page 1 of 2
X
HOLD
X = Factory reset
Press and hold I or II until the blind moves (for 5 seconds)
ᆳ
off
Press and hold I or II until the blind stops by itself in top position.
Off = Normal operation
off
XOK
X = Roofblind setting
With blind in bottom position, press I or II for 1 second IMPORTANT; Release button after 1 second
ᆲ
ᆱ
B
Press II or I until desired bottom limit is reached.
B = Bottom limit setting
A
A = Top limit setting
Blind must be down at least 200 mm before setting top limit.
Press I or II and hold until the blind stops by itself.
200 mm min.
ᆰ
Limit settings for SKYSOL type AB, DB, DBE, PB

TM24 Motor
© Dometic UK Blind Systems Ltd 2019 Tel: [phone] www.dometic.com OAT01419 Issue 03 February 2019
Page 2 of 2
X
HOLD
X = Factory reset
Press and hold I or II until the blind moves (for 5 seconds)
ᆳ
off
Press and hold I or II until the blind stops by itself in top position.
Off = Normal operation
off
XOK
X = Roofblind setting
With blind in bottom position, press I or II for 1 second IMPORTANT; Release button after 1 second
ᆲ
ᆱ
B
Press II or I until desired bottom limit is reached.
B = Bottom limit setting
A
A = Top limit setting
Blind must be down at least 200 mm before setting top limit.
Press I or II and hold until the blind stops by itself.
200 mm min.
ᆰ
Limit settings for SKYSOL type AO, AO/DB, AO/DBE
X
HOLD
X = Factory reset
Press and hold I or II until the blind moves (for 5 seconds)
ᆳ
off
Press and hold I or II until the blind stops by itself in top position.
Off = Normal operation
off
XOK
X = Roofblind setting
With blind in bottom position, press I or II for 1 second IMPORTANT; Release button after 1 second
ᆲ
ᆱ
B
Press II or I until desired bottom limit is reached.
B = Bottom limit setting
A
A = Top limit setting
Blind must be down at least 200 mm before setting top limit.
Press I or II and hold until the blind stops by itself.
200 mm min.
ᆰ