ELRO AS90S User manual

jK
AS90SRA Manual EN Version 1
USER MANUAL
INDOOR SIREN & FLASH
ACCESSOIRE HOME+ALARM SYSTEEM
Home is not a place, it’s a feeling
AS90SRA

- 1 -
Content
1. Introduction ................................................................................................- 2 -
2. Description of the siren with flashing light.................................................- 2 -
3. Pairing the siren with flashing light.............................................................- 3 -
4. Setting the siren and flashing light/Status signaling...................................- 3 -
5. Removing the siren and flashing light from the app...................................- 4 -
6. Testing.........................................................................................................- 4 -
7. Resetten......................................................................................................- 4 -
8. Sabotage protection....................................................................................- 5 -
9. Mounting.....................................................................................................- 5 -
10. Specifications ..............................................................................................- 5 -
11. Frequently Asked Questions .......................................................................- 6 -
12. DoC..............................................................................................................- 6 -
13. Symbols.......................................................................................................- 6 -

- 2 -
1. Introduction
AS90SRA is a powerful 90dB siren with flashing light. With the convenient app on your
smartphone you can make different settings. The siren with flashlight is equipped with a status
indicator. The siren with flashlight runs on 3 included alkaline AA 1,5 V batteries. The status
indicator flashes when the batteries need to be replaced, you will also receive a notification in
the app. With normal use, the batteries last approximately 12 months. Also included in the
package is a USB power cord. With this you can connect the siren to a USB port or use a USB
adapter 5 Volt 1A continuous power supply. The siren has a sound volume of 90dB measured
at 30cm distance.
2. Description of the siren with flashing light
1The 90dB siren with 4 LED flashing light notifies at:
ALARM/S.O.S When alarm occurs, via the app or remote control
2Statusindicator
Disarm via the app or remote control flashes green.
Arm via the app or remote control flashes red.
Home Arm via the app or remote control flashes blue.
3Alkaline batteries type AA 1.5V (3), average life 12 months.
4When using this cord and/or an adapter, the batteries serve as a backup.
5ON/OFF switch.
6Reset button.
7Press to perform a manual test.
8Sabotage protection against vandalism.

- 3 -
3. Pairing the siren with flashing light
During the pairing and mounting of the siren with flashlight, the Home+ alarm system must be
turned off. Turn the ON/OFF switch (5) to ON, the 4 LEDs behind the red screen will flash 1
time and the indicator will flash green, blue and red for 5 minutes.
•Open the app and tap "Add Accessories" (1).
•Scan the QR Code on the back of the siren with flashing light (2).
•Give a name, for example the location (3) and confirm with the blue "V" (4).
•You will get a confirmation, the siren will give 2 "Beep" signals and the LEDs will flash 1 time.
1
4. Setting the siren and flashing light/Status signaling
You can set the siren with flashing light to your personal preference, for example, how long
and how loud the siren should sound. See also 2. Description of the siren with flashing light
To access the siren settings menu, please proceed as follows:

- 4 -
•Tap the cogwheel (5), then wireless siren (6) and finally choose the siren and flashlight, in this
case the "Front Door", tap the "i" (7).
•Tap "Siren settings" (8) to enter the menu, remember to confirm with the blue "V" (9) after
you have changed a setting.
•Testing from the app is very easy, tap test (10) in the "Accessory Settings" menu of the siren
and flashlight "Frontdoor".
5. Removing the siren and flashing light from the app
•The link can be removed by sliding the "i" to the left and tapping delete (11). Even though the
link is broken it may take a while for the information in your app to disappear.
6. Testing
•Testing can be done in 2 ways, through the Accessory Settings app but also using the test
button in the battery compartment. In both cases you will hear 2 "Beep" signals, the 4 LEDs
and the status indicator will flash 1 time.
•The test button is also used if, instead of "Scan QR Code", the "Learn Mode" option is used to
establish the link with the ELRO HOME+ ALARM unit.
7. Resetten
•Pressing the reset button removes the link with the ELRO HOME+ ALARM unit, the siren gives 2
beep signals, the 4 LEDs flash 1 time and the status indicator then flashes green, blue and red
indicating that the link has been removed. Turn the ON/OFF switch to OFF to save the batteries
for next use.

- 5 -
8. Sabotage protection
•On the back is a switch that is pressed when the siren with flashing light is mounted against the
wall. If the system is switched on or in night mode, an alarm will occur immediately if someone
tries to remove it. Pairing, mounting and maintenance can only be done when the alarm is
turned off.
9. Mounting
•The siren and flashing light can be mounted with the supplied screws and plugs (14).
Remember that the location must be within the range of the ELRO HOME+ ALARM unit.
10.Specifications
Power supply
3 alkaline batteries type AA 1.5V (included)
Wireless distance
up to 50m (without obstacles)
Standby current
≤110 uA
In operation
≤350 mA
Siren volume
90dB@30cm
Operating temperature
-10C°~50C°
Humidity
90%rh (non-condensing)
Tamper protection
Yes, in Arm/Home Arm
Housing
PC+ABS
System indication
Yes, green/blue/red
Weight
115 g (battery not included)
184 g (battery included)
Dimensions
121mm × 88mm × 40mm

- 6 -
11. Frequently Asked Questions
I am unable to pair the siren and flashlight AS90SRA with an iOS smartphone.
•Please try the installation with an Android smartphone/tablet. After installation, the wall
box will automatically be available for your iOS device as well.
Every 9 seconds the status indicator flashes what does this mean?
•This means that the batteries have fallen below level and need to be replaced. The system
must be turned off before you replace the batteries.
What is the life span of the batteries?
•Approximately 12 months but this also depends on your personal settings.
See also: 4. Setting the siren and flashing light/Status signaling
Can I connect multiple sirens and flashing lights?
•You can link multiple sirens and flashing lights AS90SRA and facade boxes AS90SRB, just
make sure they have a (location) name in the app. For each siren and flashlight or facade
box you can make a separate setting.
12. DoC
-I, ELRO Europe, hereby declare that the radio equipment type AS90SRA conforms to
Directive 2014/53/EU. The full text of the EU Declaration of Conformity can be found at the
following internet address: www.elro.eu/compliance
-Frequency: 2.4GHz-2.4835GHz
-Maximum transmitting power: 13dBm
13.Symbols
Recycling and Disposal: The WEEE symbol means that this product and batteries must be
disposed of separately from household waste. When this product reaches the end of its
life, take it to a designated waste collection point nearby to ensure safe disposal or
recycling. Protect environment and public health, handle natural resources responsibly!
Read the manual before use and keep it in a safe place for future use and maintenance.
Warranty visit www.elro.eu
ELRO Europe | www.elro.eu
Postbus 9607 - Box E800
1006 GC Amsterdam - The Netherlands