Frama Fn 5 Series User manual

Connect the Weighing Platform (e) connector into the COM PORT on the
rear of the machine. Then connect the LAN Cable (f) and Power Cable (g)
to either side of the machine.
Open the cover. Place the Meter (i) into the meter compartment and push
backwards until it slots into position. Close the cover.
3
Machine components:
Machine Base
Feed Table with
Sealing Unit Catch Tray Weighing Platform
LAN Cable Power Cable Postage Meter
(PSD)
Ink Cartridge
Unpack all components from the box, remove packaging
and any transit tape.
1
Lift machine slightly on the left hand side and align the hooks to attach the Feed Table (b) –
align the catch tray to the right hand side of the machine (c).
5
Lower Weighing Platform release panel at rear of the
machine. Place Weighing Platform (d) on top of the
machine and slide forward to lock. Lift panel to secure
and clip cable into place.
Insert the Ink Cartridge (h) into the machine with the ‘TOP’ and ‘LOCK’ stickers facing
upwards. Push the Ink Cartridge (h) towards the back of
the machine until you hear a ‘click’ - close the cover of the machine.
Turn on the machine using the switch behind the
Power Cable (g) and follow the steps on screen.
8
Press OK to start the installation.
9
Fn Series 5
Quick Installation Guide For more help with your installation, please visit: www.frama.co.uk/Fn5
Lift the cover of the machine to reveal the Ink
Cartridge (h) and Meter (i) locations.
2
6
4
Follow the step by step instructions.
OK
Installation Process
1 LAN
10
OK
Installation Process
Welcome to your mailing system. Press “OK”
to start the installation.
7
11
Your machine is now ready
to use. Please turn over
for your Quick User Guide.
Remove tabs from
print heads before
inserting into unit!

Getting to know your Franking Machine
£000.00
E
S
Mem: None
Acct:00000
1st Inl. Lett
No service
13.03.20 0g
Screen Information
A1 Rate and services (to change: B1)
A2 Date printed (to change: B5)
A3 Weighing type (to change: B4)
A4 Imprint position offset
A5 Postage and weight
A6 Memorized job (can contain rate, stamp settings and account)
A7 Current account (adding funds: B3)
A6
A7
A1
A2
A3
A4
Shortcut keys
B1 Rate and postal services selection
B2 Memorized jobs (rate, stamp settings and account)
B3 Credit management
B4 Weighing modes
B5 Type of imprint and imprint settings
B6 Sleep/wake (amber/green)
B7 Stops printing
B8 Starts printing
B6
B1
B2 B7
B4
B8
B5
B3
A5
For more specic information on your
franking machine, please visit:
www.frama.co.uk/Fn5
Fn Series 5 Quick User Guide
Quick steps to franking your mail 4
1. Press on the key pad to stop
the motor.
2. Under the base, lift up the release
handle and, using
your other hand, remove
stuck envelope.
If Jamming occurs
1. On the new ink cartridge,
remove the protective
strips from the printing
heads.
2. Lift machine cover and
follow instructions printed
on sticker inside.
Changing the ink cartridge
2To weigh an item:
1. Check that the A3 icon is
2. Otherwise press
and select
the option: Standard weighing
1To reset the machine press:
to clear the information
on screen.
to wake the machine
up with default settings.
to return to the home screen.
3Select a rate (and services): Utilising the envelope sealer
2. Use the keypad to choose a rate or
service option, or use the wizard for
access to more rates.
3. Place your mail on the platform.
Currently selected rate and services
are indicated at the
top of the screen.
£000.47
1st Inl. Lett
No service
13.03.20 00015g
Change/add services:
1. Press
The Rate selection screen
is displayed.
£000.0
1st Inl. Lett
No service
26.07.16 0g
11st Class 22nd Class
4Inland 5Intl
8Wizard
4. When done, press
to conrm your selection and return
to the home screen.
Adding credit
Press choose ‘Credit’ and follow
the instructions on screen.
Note: in order to add credit to the
machine there must be funds available
in your postage account.
To order consumables for your machine please call: [phone]
or visit www.framashop.co.uk
5When all steps are completed
print the stamp:
2. When the rollers start, insert the mail into
the machine from the left hand side. If
using the sealer, make sure that the lip of
the envelope is inserted into the sealer as
mail passes through.
1. Press to start the motors of your
franking machine.
To prepare the envelope sealer, lift the
reservoir out of machine and open the lid. Fill
with sealing uid to indicator mark and leave
for 5 minutes. Top up, then replace reservoir.
A0127536/A - 29/10/2019