Frama Fx 7 Series User manual

Machine components:
Machine Base
Feeding Table Catch Tray
Weighing Platform
Shelf LAN Cable Power Cable Postage Meter
(PSD)
Ink Cartridge
Lift machine slightly on the left hand side and align the hooks to attach the feeding table (b) –
attach the catch tray (c) to the right hand side of the machine.
5
2
Lift the cover of the machine to reveal the
ink cartridge (i) and meter (j) locations.
Attach the weighing platform (e) and
shelf (if applicable) (d).
6
Connect the weighing platform connector (f) into a COM PORT
at the back of the machine. Then connect the LAN cable (g) and
power cable (h) to either side of the machine.
7
Turn on the machine using the switch behind the
power cable (h) and follow the steps on screen.
8
Unpack all components from the box, remove packaging
and any transit tape.
1
Place the meter (j) into the meter compartment and push backwards
until it ts securely into position.
Insert the ink cartridge (i) at an angle into the machine with the ‘TOP’ and
‘LOCK’ stickers facing upwards. Push the ink cartridge (i) towards the back
of the machine until you hear a ‘click’ - close the cover of the machine.
4
3
Back of the machine
Weighing Platform
Cable
For more information or if you experience any
issues, please visit : www.frama.co.uk/Fx7
Select LAN and press to test connection type.
OK
Installation Process
1 LAN
9
Follow the steps on screen to complete the
procedure.
Next
Installation Process
Press the ‘Next’ to start the
Online service
declaration.
10 11
Your machine is now ready
to use. Please turn over
for your Quick Start Guide.
Fx Series 7
Quick Installation Guide
Remove tabs from
print heads before
inserting into unit!

Shortcut keys
B1 Rates and Services selection
B2 Job Memory (rate, settings and account)
B3 Credit management
B4 Label printing
B5 Weighing modes
B6 Type of imprint and Imprint settings
B7 Sleep/wake (amber/green)
B8 Stops printing
B9 Starts printing
Screen Information
A1 Rate and services (to change: B1)
A2 Date printed (to change: B6)
A3 Weighing Type (to change: B5)
A4 Imprint position offset
A5 Type of imprint (to change: B6)
A6 Postage and weight
A7 Job Memory (can contain rate, imprint settings and account)
A8 Current account
A9 Reset counter : to perform this action, press the button on the
right side of the machine (N5)
A10 Credit
To reset the machine...
Press:
Adding credit
Press choose ‘Credit’ and follow the
instructions on screen.
Note: in order to add credit to the machine
there must be funds available in your postage
account.
4
2. When the rollers start, insert the
mail into the machine from the
left hand side.
To seal the envelopes
1. To seal the envelopes (if applicable)
Use the button at the front of the sealer.
Check water level in the bottle.
When all steps are completed
print the imprint:
If you want to print on a label or
automatically seal the envelope, check
additional options below.
1. Press to start the motors of your
franking machine.
1. Insert labels into the dispenser until
a click, printing side facing the right.
2. Press to enter the number
of labels to print and then press
to clear the information
on screen.
to wake the machine
up with default settings.
to return to the home screen.
1st Inl. Letter 00000
To access your full user guide,
please visit :
www.frama.co.uk/Fx7
A0141573/A - 30/03/2021
To order consumables for your machine please call your dealer or visit
www.framashop.co.uk
Fx Series 7 Quick Start Guide
Getting to know your franking machine Quick steps to franking your mail
1
1. Press on the
keypad to stop the
motor.
2. Under the base, lift up
the release handle and
use your other hand to
remove the jammed
envelope.
If Jamming occurs
To weigh an item:
1. Check that the A3 icon is
2. Otherwise press
and select the option: Standard weighing
3
1. On the new ink
cartridge, remove the
protective strips from
the printing heads.
2. Lift machine cover
and follow instructions
printed on sticker
inside.
Changing the ink cartridge
Credit £ 1,000.00
B7
B8
B9
B1
B2
B3
B6
B5
B4
A2
A3
A5
A10
A8
A6
A1
1st Inl. Letter
Currently selected rate and services
are indicated at the
top of the screen.
Change/add services:
1. Press
The Rate selection screen
is displayed.
2Select a rate (and services) :
2. Use the keypad to choose a rate or
service option, or use the wizard for
access to more rates.
3. When done, press to
conrm your selection and return to
the home screen.
1st Inl. Letter
1st Class 2nd Class
Inland International
Recorded Del
7
A4
00000
00000
A9
A7