FRENCH FITNESS FF-MIC4 User manual

FF-MIC4
FRENCH FITNESS MIC4 MAGNETIC
INDOOR COMMERCIAL CYCLE
ASSEMBLY MANUAL
Noting: This Training Device Meets the standard of EN957-10 Class S

•Electromagnetic control, self
generating system: 32 section
resistance adjustment
•Leg is chrome plated
•Handrail is with PU foaming
•Aviation aluminum alloy slider adjust
up to 250mm
•Kettle holder
•Transmission mode: Belt
•8.8 lb large wheel
•Heart Rate Hand Grips
•CONSOLE: Track Time, Distance
(KM), Calories, Pulse (Heart Rate),
RPM, and Speed
•(2) Cup Holders
•Resistance Knob
FEATURES
•Height: 51” (130cm)
•Width: 21” (53cm)
•Length: 50″(127cm)
•Item weight: 112 lbs (51 kg)
•Max user weight: 350 lbs (159 kg)
•User size range: 4’11 to 6’8 (150 to 203 cm) tall
TECH SPECS
10 Years Parts, 1 Year Labor (Commercial)
WARRANTY
•2 Seat Adjustments: Forward / Back +
Up / Down
•Handlebar Adjustments: Up / Down
•Window Display: shows time, speed,
distance, pulse, calorie. It can test body
fat percentage according to sex, height,
weight, and age.
•Handlebar attachments
•Magnetic Resistance system
•Made of superior steels and tubes
•Self-powering console which features
your workout gear level, time, distance,
calories and much more - A very detailed
console!
•Belt driven for an authentic outdoor ride
feel, near zero maintenance, and a quiet
ride

3
WARNING: This manual contains important safety information, please read it
carefully before using the equipment
1. Children and the disabled cannot approach or use this device when
unsupervised.
2. Before training, please pay attention to the safety warnings and exercise
instructions on the equipment. If you feel unwell during exercise, please stop
training immediately and consult a doctor.
3. Incorrect or over training may harm your health.
4. Inspect and maintain the equipment regularly, and ensure the integrity
and
firmness of all Steps on the equipment.
5. Pay attention to the inspection and maintenance of vulnerable Steps on
the
equipment.
6. If the equipment Steps are damaged or abnormal sound occurs, please
stop
using it immediately until repaired
7. The instrument should be installed in a stable place and leveled.
8. Before use, please adjust the equipment according to your personal
situation, such as resistance, seat cushion position, etc.
9. Maximum user weight: 120kg (265LBS)
10. Minimum use space for this device: 3000x1200x2400mm (LxWxH)
SAFETY INSTRUCTION

4
Step 1: Use A1 screws and A2 nuts to install the front and rear feet and the main frame
together.
ASSEMBLY STEPS

5
Step 2: Install the pedal, the left pedal is counterclockwise for tightening, the right pedal is
clockwise
for tightening

6
Step 3: Install the front and rear adjustment tubes, turn the knob counterclockwise and pull
the knob
outwards, and insert the front and rear adjustment tubes into the large frame
at the same time, turn the
knob clockwise to tighten.

7
Step 4: Install the handlebar and seat. Push the handlebar and seat forward and backward
according to
the arrow direction. Turn the knob clockwise to tighten and
counterclockwise to loosen. Adjust
distance between the handlebar and seat
according to your height.

8
Step 5: After the installation is complete, the 4 feet are leveled. The reluctance knob rotates
clockwise
to increase resistance, and counterclockwise to decrease resistance.
According to your height, adjust
the height of the front and rear adjustment tubes, and
adjust the distance between the handlebar and
the seat according to your height.

9
1) The assembly Parts are properly connected, and the adjustment handles are tightened,
and there is no looseness.
2) The handle assembly and the cushion assembly are firmly fixed, and there is no sign of
relative shaking.
3) The pedals are fixed and there is no looseness.
4) The brake is properly connected and used normally.
5) During use, the movement is smooth and there is no obvious abnormal sound.
Note: Please tighten the screws and nuts before use in case loosening
VERIFY AFTER ASSEMBLY