FRENCH FITNESS FF-FSR50-LPD User manual

OWNER’S MANUAL
FF-FSR50-LPD
Color: Black
20230216-V1.0

ASSEMBLY MANUAL
BEFORE YOU START
Remove all parts from the packaging and separate and count each various component to ensure
everything has been correctly provided.
Follow the instructions and consult both the individual assembly pages and the overall expanded views
of the equipment.
It is the owner’s responsibility to ensure that all users of this unit have read the owner’s manual and are
familiar with the safety precautions.
SAFETY PRECAUTIONS
equipment.
Stop immediately if you experience any pain, dizziness or nausea. See a doctor at once.
PLEASE NOTE: Descriptions of pieces as LEFT and RIGHT are from the point of view of standing behind the
equipment facing towards the front.
BEFORE STARTING ANY EXERCISE PROGRAM, CONSULT YOUR DOCTOR. ESPECIALLY IF YOU ARE
OVER THE AGE OF 35 OR HAVE PRE-EXISTING HEALTH PROBLEMS.
READ ALL INSTRUCTIONS BEFORE ASSEMBLING OR USING ANY FITNESS EQUIPMENT.
WE ASSUME NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED
BY OR THROUGH THE USE OF THIS PRODUCT.
SAVE THESE INSTRUCTIONS.
1

IMPORTANT ASSEMBLY INFORMATION
Tools Required for Assembling the Equipment: Adjustable Wrench and Allen Wrench.
NOTE: It is strongly recommended that this equipment is assembled by two or more
people to avoid possible injury.
Ensure Carriage Bolts are inserted through the SQUARE holes on components that need to
be assembled. Attach washer only to end of the Carriage Bolt.
Use Allen Bolts or Hex Bolts inserted through the ROUND hole on components that need to
be assembled.
Always wait until all bolts are assembled onto the bench before tightening the bolts. Do not
tighten each bolt right after it is installed
Fasten Nuts and Bolts
Securely tighten all Nuts and Bolts after all
components have been assembled in current and
previous steps.
NOTE: Do not over tighten any component with
pivoting function.
Make sure all pivoting components are able to move
freely.
Do not tighten all Nuts and Bolts in this step.
2

3

4

5

6

KEY NO. PART DESCRIPTION SPEC Q'TY
1 Main Frame 1
2 Shield 1
3 Cable L=1300mm 1
4 Pulley φ96 2
5 Pin 1
6 Loc Pin 1
7 Hoo φ8 2
8 Nut M10 2
9 Washer 10 2
PARTS LIST
NOTE: SOME PARTS MAY COME PRE ASSEMBLED, IN WHICH CASE CONTINUE
ONTO THE NEXT REQUIRED STEP OF ASSEMBLY
7