Glow Bricks Crocodile Locomotive Lego 10277 User manual

Crocodile
Locomotive
1

2
First take of the top and get these lighting parts on the position

Install the lighting plates first then pull the lighting dishes on top to the cable rack
You can hide the cable by taking off the slope on the side
3

Install the lighting plates as shown
4
Then detach the parts as shown and we don’t need the 1x2 plates
They would be replaced by the lighting plates

For the remain lighting parts, pull them out and pass through the corner
5
Then you can restore the detached parts

Turn around the train, the remain lights would pass to the bottom as shown
Then install the 1x2 lighting parts to the bottom
6

Pull the remain lights to the headlight area
Then replace the clear round plates
7

8
To power by battery, connect with the battery case and hide it here
To power by USB, connect with the USB cable, take one tile off pass the cable through

9
Then restore it