Glow Bricks Lego 123 Sesame Street 21324 User manual

1

2
First detach the black lights from the front door, replace the parts on the lighting
kit

Install the lighting parts, clip the wires in between the tan parts
3
Remove the following parts from the front door

Turn around the house, detach the parts as shown
4
Then restore the front door parts and the doors afterward

Install two 1x8 lighting plates on the outer side of the roof
5
Restore the following parts, clip the wire in between the studs then restore the
last 2x8 plate

Now take these lighting parts
Install two 1x4 lighting plates
6

Install the lighting round plate
7
Remove the clock and parts from the rack, hide the wire behind then restore them

8
Restore the 2nd floor and beware of the wire at the corner
Then install the green lighting plates as ceiling lights

9
Now remove the top of the small building and the green plate as shown
Install the 1x4 brown, clip the wires of connector and round plate in between
the studs on green plate

10
Remove the top plate and restore the 2nd floor
Install the lighting 1x2 plates

11
For safety, combine the 1x6 bricks before restoring the top
Then restore the top

12
The lighting round plate will be installed to the lamp
Connect the connectors
Remove the clear head from the lamp post and replace by the lighting part

13
The lighting round plates will be installed on the tree
Connect the USB cable then that’s it