Glow Bricks FIAT NUOVA 500 Lego 10271 User manual

1

2
First we separate the parts as shown
(The parts in red circle will be taken away and replaced by the lighting part)

Install the lighting part and put back to the car
Can remove the front plate before installing in purpose to cover the wires when
restoring the plate
3

For the connector, pull the wire underneath the car and back inside the car
from the hole as shown
4
Restore the plate and the front light back to the position

Leave the wire in here first then we go to the next step
5
For the rear side of the car, detach the parts as shown

The plates in red circle will be taken away and replaced by the lighting part
Then restore the clear tiles and the 1x4 plate
6

Restore the rear lights and bumper back to the car
Then detach the rear window in purpose to pull the 1x6 lighting plate inside the car
7

Install the 1x6 lighting plate
Pull the connector to the front seat, then restore all the parts detached before
Take the USB cable ready
8

Connect the plugs then hide them behind the seats
9
The connectors from the USB cable can get into the car by the hold shown

10
Then it’s done~
You can use battery box instead of the USB cable
*the battery box needs CR2032 battery and sold SEPERATELY

11
The battery box can be hidden as picture shown