Glow Bricks Camaro Z/28 Lego 10304 User manual

1

2
Take shown lighting part for the top of the car, detach the
plate of any side

3
Put the top back on the car, pull the wire to the bottom and stable
the wire by the stud on the side
Assemble the lighting plate then restore the removed plate

4
Take this lighting part for the rear side of the car
Detach the shown parts
Restore the removed parts

5
Then put the rear lighting back to the car
Assemble the removed parts withthe lighting parts, make sure the
clear red tiles on the lights of the white plate

6
Now it’s turn for the rear side, take the lighting parts with clear
blue plates and detach the shown parts similar as the front
For the connector, move it to the bottom by removing the shown
parts to empty some space for it

7
Then restore the license plate back

8
Assemble the lighting parts with the front light parts
For the front, take the remain lighting parts
Detach the shown parts

9
Move the connector to the bottom and get through the shown space
Restore the front lights back to the car

10
Now you can restore the shown parts
Assemble the remain lights back to the bottom

11
To power up, you can choose either by USB or battery
Just connect three connectors with the USB cable/battery case