Glow Bricks Harry Potter Lego 76408 User manual

12 Grimmauld Place
1

2
First of all, split the 2nd+3rd floor on both sides

Take the lighting part with the red diamond for the shown side
Assemble the grey 1x4 lighting plate and the red diamond at the top floor
3

Take this lighting part for the other side
4
Then assemble the remain lighting plates at shown

Similar as the previous side to assemble three lighting plates
5
Now take the remain lighting part to assemble it into the main building

Start by assembling the black lighting plate and the clear diamonds
And make sure the position of the connectors must be male on left female on right
Otherwise it won’t match the plugs when placing the upper level back on the building
6

Assemble the brown lighting plate and the lighting round plate for the lamp
And the top level follow by
7

Now placing the upper level back, take the tile out the clip the wire as shown in the red
circle, then connect the plugs
Restore the building, then replace the clear brick by the leftover lighting brick
8

Now do the same thing for the other side, and put the lighting round plate inside the wall
9

At last, replace the lighting round plate from the previous step to the lamp
10